Winding the line for the trimmer on the mower. How to correctly change a line for a trimmer on a trimmer

How to wind the line for a trimmer on the bobbin: tips for the experienced

Any owner of a garden plot knows how quickly weeds can overrun the territory. Grass trimmer will help defeat them without excessive effort. This incredibly useful device is an indispensable helper in trimming and mowing the grass.

petrol grass trimmer

Small mobile devices for cutting grass and young branches, consisting of a boom, motor, cutting part and handle are called trimmers.

The design of gasoline trimmer is simple, it can be easily dismantled if necessary

There are electric and gasoline versions. The former do not refuel, but they depend on the length of the cord. The latter work regardless of the availability of electricity, anywhere in the garden or vegetable garden.

Gasoline grass trimmers are lighter and less expensive than lawn mowers. They can also handle grass and bushes, so these mowers are used at home and on an industrial scale. For convenience, the technique has straps that are put on the shoulder. So there’s less strain on the arms and back.

How to Tuck a Trimmer Wire into a Grass Trimmer?

To ensure that the area near the house always looks well-groomed and neat, it should be regularly trimmed. Fortunately, modern technology allows you to solve this problem without excessive physical effort. Electric grass trimmers are so easy to operate and maintain that even a teenager can mow the grass with their help. The main thing to understand beforehand, how to tuck into the trimmer for grass trimming line.

How to load a line for a trimmer in a grass trimmer?

So, we are faced with the task. to correctly charge the line for the trimmer in the trimmer for grass. Let’s analyze in detail, how to begin its implementation, and what pitfalls can expect us in the process.

At the very beginning it is necessary to choose a correct line for the trimmer. Although at first glance all trimmer lines on the market or in stores are not very different from each other, you should not buy them at random. Not to err in choice will not be superfluous to bring a package of used fishing line or a small piece of it, or at least write down the model trimmer for grass. The ideal option for almost all trimmer models will be a line for the trimmer with a thickness of 3-4 mm.

To perform this operation, grass trimmer should be unplugged and turn the working head upside down. The further course of action depends on the model of grass trimmer and the design of the spool itself:

  • In small trimmers with the lower location of the engine, we press the keys located on the sides of the spool and remove the top part of the spool from the head;
  • On trimmers with a bent rod clamp the body of the spool with one hand, simultaneously turning counterclockwise the drum located on the body;
  • For straight bar trimmers with a reducer insert a screwdriver in the hole under the spool and turn the body of the spool counterclockwise.
See also  How to adjust the carburetor on a trimmer

After the spool is removed from the head it should be carefully disassembled. It is better to do it on an already mowed area, as there may be a spring inside the spool, which will be quite difficult to find in tall grass. After disassembly we will have three parts: the body (top cover), protective cover and the spool itself.

Step 4. measuring the necessary amount of line

Beginner mowers usually wonder how many meters of fishing line to wind on the grass trimmer reel? There are two ways to solve this issue:

In any case, after you finish winding the line should be on the body of the spool without slipping off it. It is not necessary to try to wind as much as possible, as the line for the trimmer will not unwind well and more often tear.

Step 5. winding the line onto the spool

How to install the trimmer line on the grass trimmer depends on the design of the spool. Let’s consider the variant when the body of the spool has one exit for the line for the trimmer. In this case, the end of the fishing line is clamped in the cleft of the spool, and then wind the line for the trimmer, trying to lay the coils as tightly as possible. The direction of winding should be opposite to the direction of rotation of the coil and is usually indicated on the inside of the coil. After completing the winding, you need to put a protective cover on the spool and lead the end of the fishing line into it

If the spool is designed to work with two tails, the line for the trimmer should be folded in half and placed in the groove in the central part of the spool. Further winding will be done with one or two slots, depending on the construction of the spool. The winding direction should also be opposite to the direction of rotation of the spool. At the end, the tails of the fishing line will also need to be brought out into the holes on top of the spool.

Winding the line

It is not difficult to insert the trimmer line into the grass trimmer. To carry out this operation, it is necessary to follow a simple algorithm of actions. The first step is to determine how much consumable material is needed. To make its calculations, you need to wind the line for the trimmer on the bobbin so that the resulting coil would be less than or equal to the diameter of the sides of the structure.

When you have decided on the size of the cord, you need to fold it in such a way that one part of it is 15 cm longer than the other. Winding the cord begins at the side that divides the bobbin into two parts. Here will be located the fastener, in which you need to insert the thread, bent in half.

Now it is necessary to understand in what direction to tuck the line for the trimmer in the trimmer for grass. To do this, you need to inspect the bobbin. often there is a special arrow on it. If there is no explanatory information, you should find the pointer on the trimmer head, and start winding in the opposite direction. The further steps can be divided into 4 steps:

  • Finishing winding the filament. To do this, it is inserted into the side groove on the spool. Its second end is attached to the opposite groove.
  • The ends of the fixed fishing line are cut. 7-10 cm of allowance is left over.
  • The tucked part is placed in the head of the grass trimmer. To do this, the thread is inserted and pulled alternately into the inlets of the structure.
  • The thread is pulled out of the grooves. Once the action is completed, the product cover is secured with the clamps.
See also  What oil to mix with gasoline for grass trimmer

After completing the last step, the garden tool is ready to work. If after inserting the line into the grass trimmer the device does not work correctly, it is recommended to repeat the procedure, changing the thickness or type of cord. Otherwise, the product can fail.

How to remove the bobbin from the tool faster

Before the thread is spooled onto the bobbin, the bobbin must be removed. Ways of dismounting depend on the characteristics of the tool. On trimmers with a motor at the ground itself, the spool has two side buttons that, when pressed, detach part of the body along with the filament winding device.

For instruments with a bent rod, move the knob on the attachment counterclockwise; disengaging it removes both the bobbin and the spring inside it. On trimmers with a straight bar fix it with a screwdriver, rotate it clockwise and remove it. Then the device is disassembled either with the help of latches or by moving its parts in different directions. The spring is removed from the bobbin.

Algorithm of winding the line

Order of line winding depends on the type of spool. with one or two tendrils, as well as with automatic cord charging.

On a bobbin with one strand

It is very easy to wind the line for a trimmer on a spool with a single bar. In such designs, depending on the brand of trimmer for grass, fits from two to five meters of cord. The edge of the line in the bobbin should be tucked into a special hole or groove, then the string is wound in the opposite direction to the rotation of the spool during operation.

Tip! To know which way to wind the thread, you should look at the body of the bobbin. usually there are markings on it indicating the direction of the bobbin’s movement when working.

After the line for the trimmer is wound, you need to leave a small piece (15-30 cm), put it through the bobbin outlet and reassemble the head.

On a bobbin with two tendrils

With this type of bobbin, you need to inspect the inside of the bobbin and determine the number of grooves for winding the cord provided in it.

Important! If the spool has one groove, both tendrils should be wound in a common groove; if two, they should be wound in separate tracks.

For winding, you need to take a piece of fishing line two to three meters long. For a bobbin with one groove, you should tuck the line for the trimmer into the through hole, align the whiskers, align and wind it on the spool in the direction opposite to its rotation during operation. If you have locking grooves, you must thread the ends of the filament into them, then pull them out into the exit hole, then close the spool and put it back in place.

For double-stranded spools the difference is that a section of string should be folded in half. Next, you need to charge the middle of the bend in the groove between the grooves, and then wrap each of the pieces of line on its track, fix the tendrils and reassemble the spool in the same way as the bobbin with a single track.

See also  The grass trimmer does not work what to do

On a trimmer head with automatic threading

For heads with automatic threading, all you need to do is start and clamp the edges of the line, and the tool will do further winding by itself when it is turned on. There is no room for error, because the coil recognizes by itself how the tendrils should be positioned.

Just a side note! The advantages of trimmers with such a head include the convenience of laying the cord, and the disadvantages. expensive and difficult to repair.

How the line head on the brushcutter works Why you need to know the principle of operation

Depending on the manufacturer, heads differ structurally not only externally, but also internally. Most reels have a pressure spring inside (semi-automatic and automatic). Above is the instruction on how to disassemble the grass trimmer head without the spring, t.е. On a manual-type head. The principle of dismantling a semi-automatic head with a spring inside is almost identical to the above instructions.

The principle of operation of the semi-automatic grass trimmer reel is as follows:

  • Inside the head there is a spool, which is mounted on slits, preventing its free movement
  • The coil is actuated by a spring, which presses it against the slots in the cover structure
  • A trimmer line is wound on the lead, the length of which depends on the tool itself. This length is usually 1 to 4 meters
  • During work, if it is necessary to increase the length of the fishing line, the protruding part of the drum is pressed, by which it is out of mesh with the splines. In this case, the line for the trimmer is coiled from the drum, increasing in length
  • After releasing the desired amount of line, release the hold-down and continue mowing

The advantage of a tool with a fishing line is that this consumable does not require sharpening, compared with metal discs. over, if a stone or wood gets in the way, the line for the trimmer simply comes off, without negatively affecting the gearbox and engine of the tool, as it happens in the case of metal cutting discs.

Knowing the design and construction of the types of mower or trimmer heads, it is necessary to proceed to consider the process of threading the line into the grass trimmer reel. This is the point where most power tool owners have difficulty.

Block: 4/8 | Number of characters: 1779

Tips

Working with a technique like a grass trimmer requires caution and care. For beginners and experienced craftsmen alike, safety precautions during work are a must. It happens that confident mowers lose their guard, make irreparable mistakes and get seriously injured. That is why it is important when working with this device

  • Close the reel cap with all catches.
  • Do not coil more line than necessary: it is difficult to unwind later.
  • After filling up the spool, be sure to check that the tool works before mowing.
  • Choose quality material that fits the particular trimmer.

Don’t try to mow coarse grass with thick stems with a fishing line. There are steel discs for this. Wear protective clothing only. Wear safety glasses and proper footwear.

Related Posts

| Denial of responsibility | Contacts |RSS