What tools are needed for laying tiles

Joint filler set

After the tile is laid on the floor or wall, you need to fill the joints. Under this case, you will need a plastic container of about 2 liters, a grouting trowel of rubber. Since the grout mixture contains various chemical components harmful to humans, it is better to insure the rubber gloves.

Felt glove is needed on the next day after the drying of grout, when a deposit is formed, which is removed with a piece of felt. A trowel or sponge is responsible for the uniform removal of a layer of partially seized mixture. The foam is indispensable for sanding and bringing the floor to the final result. In addition, you will need a bucket, basin or other container for normal water.

In addition, it has to be taken into consideration that the need for other tools is also quite high. For example, a mop with a replaceable double rubber no more than half a meter is very convenient for cleaning. A rubber trowel will bail you out over its lifetime, which is a minimum of 10 years! A flat trowel for laying plastic tiles will be good for eliminating irregularities.

The rubber mallet weighing up to 1 000 g is used for probing and getting rid of voids under the tiles on the floor and on the wall. Angle grinder will help greatly facilitate the work, saving you energy and time. Auxiliary tools: bubble level, tape measure, pencil, chrome square with embossed numbers, painting cord and aluminum wedges.

Additional equipment

It is not certain that you will need these tools, but it is advisable to have them in your arsenal just in case.

  • Measuring tape and level.
  • Angles. It is desirable to have in your arsenal of about two angles. One small one for marking hole locations. As a rule, they are made of chrome material, less often painted. Large squares are used for marking the floor.
  • Marking cord. Allows you to mark the line between the objects.
  • Water or laser level. If you often put plaster, then having a level with a laser will simplify your life and make the work easier.
  • One and a half and two meter long spirit levels. Needed for the finish check the result of the work.
See also  The Aveo air conditioner compressor clutch does not engage

How to lay your own hands hands PVC tiles on the floor

This coating is laid on the surface of any type. In this process does not take much time and effort. Before you lay a PVC tile on the floor with your own hands, you need to level it to an ideal condition. Over the screed, self-levelling compound is applied, the thickness of which does not exceed 2-3 mm. It is very important that the substrate is dry, clean, without traces of wax and paint. Glue and the PVC tile itself should be stored for two days in the room where the installation will be carried out at a temperature of 18-29 ° C. This temperature must be maintained for two days after completion of the work.

Glue the tiles from the center of the room, which is located at the intersection of lines drawn from the center of two opposite walls. Beforehand, you should check how the material is laid. To do this, a test row of tiles without glue is made. If half of the tile is left at the edge, then the initial lines have to move by its size.

When choosing a glue, you need to take into account the recommendations of the tile manufacturer. The glue is applied to the floor area. You can finish the work in an hour, because the glue dries quickly. The tiles are laid on the required layer of adhesive, which is applied to the substrate with a toothed trowel. Before laying the next tile, it should be closely matched to the previous one. Then it must be rolled with a rolling pin or roller, so that it adhered tightly to the base. To make sure the pavement turns out evenly, focus on the starting lines you’ve drawn.

When the main space is filled, the tiles are laid around the edges. To do this you need to cut it into pieces of the required size. After laying, apply 2-3 coats of polishing agent. The floor can be cleaned with detergents.

See also  What tools for the home?. Universal tool sharpener

The advantages of PVC tiles include ease of repair. While laminate needs to be completely disassembled to replace a damaged tile, a scratched or stained tile can be removed by simply pulling a knife. After that, the place where it was located, cleaned, removing irregularities, covered with glue and installed a new tile. PVC is mechanically resistant, but it is advisable to overstock the material in order to save time and effort later on, if necessary, to find the right texture and color.

Here you can watch a video on tile work with PVC material:

Construction level

Further: to measure the verticality and horizontality of the masonry as a whole and each tile separately, you need two building levels: one. 40 cm., another. 150. A short level is measured horizontality of each individual floor tile, as well. verticality in the two projections of each individual wall tile.

��Tile basics, tools you need.��

With a long level. the overall horizontality of the entire row of floor masonry and verticality in the two projections (front and side) of the wall masonry. For more details on working with levels, see this article.

How to lay tiles on the floor review of layouts, making a project, preparing the base

Ceramic tiles are considered one of the main finishing materials that are used in the kitchen or bathroom. These products have high strength and durability, have a huge range of. Next we will learn how to lay tiles on the floor, and what tools are needed for this.

tools, needed, laying, tiles

Measuring tool

The level. It is the quality level that masters call a guarantee of a good tiling. Laser level is significantly more expensive than the classic water level. It is more convenient and speeds up the marking. However, we can not call these differences fundamental, since the marking work takes a little time. The bubble level is necessary in work constantly. Check the quality of laying in the process. Painting or whitewashing cord. Painting cord is beaten off with a fishing line, on which the first tile is laid. If you have a laser level in your arsenal, there is no need for a cord. Rules. Aluminum rules or wedges are used when preparing and aligning the walls and floor for the laying, as well as with their help, the final level check is performed. Angle. With the help of a square, you can mark out the tiles on the plane, as well as mark out the holes in the tile. Measuring tape. All measurements are made with a construction tape.

See also  Tools for interior decoration. What tools can be used to create relief

Tiling: preparation and laying technology

When performing tile work, craftsmen act in accordance with the peculiarities of the material used for tiling. But whatever the technology of laying tiles is not used, without careful preparation of the surface, purchase the necessary tools and supplies (adhesive composition, primer, joint filler and bitumen waterproofing) can not do.

Any work begins with thorough preparation of the surface. In the case of tiles, the surface must be leveled with plaster mixes or tile adhesive.

Walls or the floor during the tile work with your own hands are cleaned from dust and dirt and washed. From the concrete, peeling is removed; if there are residues of non-water-resistant paint, they are removed; if the paint is water-resistant, it is simply brushed away. For the floors there are special eveners.

After cleaning the prepared surface is primed. If the wall is smooth and even, then the primer before use dilute with water at a ratio of 1:2. If areas are treated where there is a possibility of direct contact with moisture, waterproofing is applied to the substrate of plaster and gypsum plasterboard sheets.

On this page, you will learn what tools and materials you need to install tile, as well as how tile finishing work is done in conventional and non-conventional conditions.

Overview of approximate per m² for laying tiles in the bathroom

Tip! If the craftsman you were planning to involve in the work is busy, it is better to wait a while and postpone the repair than to turn to unfamiliar craftsmen.

Approximate cost of tile laying.

tools, needed, laying, tiles
Type of work Unit of measure Price (as of June 2018.),
Seamless ceramic on walls м² 1000
Regular wall and floor tile м² 650
Curbs per square meter. м. 400
Decor nadka. м. 550
Mosaic м² 1300

Related Posts

| Denial of responsibility | Contacts |RSS