What kind of oil to use?. Advantages

What is the right oil to gasoline ratio for a chainsaw?

Hi there! This article will talk about the proper oil to gasoline ratio for a chainsaw. This is probably the most important thing you should know when operating this machine. Not enough oil leads to excessive friction and too much oil leads to excessive fouling and overheating. Both will result in rapid engine damage. Repair can cost you half the price of a new chain saw.

In addition to the correct proportions, here we will talk about other important things that will maximize the life of your chainsaw. what gasoline to use, what oil to pour, how to dilute it, the storage time of the mixture, etc So I advise you not to stop reading after the section on proportions, because later, too, there will be information that you need.

Benzopil-oil range

The current list includes brand-name special-purpose products, which differ from their single-type counterparts by excellent lubricating properties, thermal stability, stable operating characteristics when working in regions with complex weather and climatic conditions.

When evaluating the merits of a lubricant, the following attributes are considered:

  • Type of base, mineral or synthetic;
  • lubrication properties;
  • Smoke and toxic compounds in the exhaust fumes;
  • absence of fouling;
  • detergent and anti-coking properties.

The oil is normally a semi-synthetic or synthetic oil for two-stroke chainsaw engines (2T), which forms an oil film that is resistant to external influences and does not leave a residue after combustion. The best oil for a particular chainsaw is a semi-synthetic compound recommended by the manufacturer as the main option.

Varieties of Lubricants

Due to the characteristics of the two-stroke engine, a number of specific requirements apply to the lubricant to be used. The main criteria for a good quality oil are

  • lubrication properties;
  • cleaning properties;
  • low smoke emission;
  • Fluidity and miscibility with petrol at all temperatures;
  • protection of working surfaces against corrosion;
  • prevention of premature ignition;
  • no fouling.

Big manufacturers of small equipment like STIHL or Husqvarna have their own line of lubricants designed specifically for their machines. If you do not want to think about what oil for a chain saw Husqvarna will be better, or what kind of oil for a chain saw STIHL will be needed, it is worth buying branded products.

See also  Concrete cutting tool. Advantages of diamond cutting

In the event that the tool is constantly used, additionally there is the question of the cost of lubrication. Using mineral oils is cheap, but the owner risks the longevity of his tool. Especially with heavy loads and improper gas operation. The alternative is synthetic. They are more expensive compared to mineral, but cheaper than branded products produced by one or the other equipment manufacturer. Mineral oils provide stable engine operation, less pollution and lower fuel consumption.

Deciding what oil to use for a chainsaw, the owner must weigh all the advantages and disadvantages of this or that option.

How to dilute petrol and chain saw oil?

Mixture of gasoline and oil must always be prepared in a clean container, the walls of which are measuring marks. This will give the chain saw owner the ability to accurately determine the amount of gasoline and motor oil he is mixing. The material of which the container is made should be resistant to gasoline. Metal vessels are good for this purpose.

Chain lubrication of chain saws

Quite often the question arises. what oil to use for chainsaw chain? To lubricate the working element of a chainsaw, its chain, it is necessary to use special oils developed specifically for this purpose. These are so called adhesive oils. Many use other varieties, engine or transmission oil, but they will not be as effective as a special adhesive oil. The reason for this is that there are adhesive components in the structure of the special lubricant, which make it “stick” to the chain. Accordingly, less of this product is lost in the chain rotation, and the chain and bar are subject to less wear and a longer service life.

Thickness is an important parameter for an oil intended for chain lubrication. Products that are too thin are more likely to be wasted. Oils that decompose afterwards are also available so that they do not harm the environment. They use a vegetable base. Costs are somewhat higher than conventional products.

Chain oil is poured into a special reservoir up to the filler neck. It should be added at the time of refueling, because if the chain lubricant is underfilled, it may run out before the gasoline. This can cause the chain to overheat. In the paperwork, the manufacturer specifies the oil consumption for the chain. However, it often differs in the smaller or larger side, due to the difference in properties. When operating in freezing temperatures, it is necessary to fill the oil with a low thickening point, in order to avoid failure of the oil pump.

See also  What kind of oil to put in a jackhammer?

A chainsaw is a handy, productive, reliable tool. It is indispensable for building work, cutting firewood, sawing trees or logs. With competent use, proper maintenance, compliance with safety requirements, this machine will last a long time and will be happy with uninterrupted operation.

Gasoline to oil ratio for a chainsaw

For information on what ratio to prepare the mixture and what oil to use for a chainsaw, you should study the instructions. For any equipment, where two-stroke gasoline engines are used, the correct proportion is indicated both in the instructions of the unit, and on the oil container. When using the original product, the ratio is usually 1:50. If you have to prepare a fuel mixture with the use of “non-original” oil, the proportion is changed to 1:40. Simple arithmetic calculations will show that 20 “cubes” of original lubricant or 25 cm3 of other brands’ products are needed for one liter of gasoline.

As a guideline for the mixture, you should only consider the information from the tool manufacturer’s official instructions. Some companies have a ratio of gasoline to chain saw oil of 1:30, 1:40 or even 1:100. That’s why you should not be lazy to read the original instructions. In order that the proportion was accurate, it is convenient to use a disposable syringe “twenty”. If you use a lot of fuel mixture at once you can use the measuring scale available on practically all standard containers of oil.

kind, advantages

You have to remember that stockpiling fuel mixture for the future is unwarranted in most cases, unless the fuel mixture will be used within 1-3 days.

How to dilute the oil in the fuel correctly?

Dilute oil in gasoline, following a certain sequence. Earlier it is poured into the canister or other container, then in the same container add appropriate gasoline, which is used in a chainsaw. The gasoline volume should be about half of the desired amount of fuel.

Having painstakingly knocked down the mixture and mixed, add the second part of the prepared fuel to it. Pour the mixture into the fuel tank after shaking the mixture thoroughly in a unique container. Pour the mixture carefully, trying not to spill it.

It is not recommended to fill the fuel up to the top of the tank. Usually there is only a little space left on the top tank. A 0.5 liter fuel tank can provide two kW or 2.7 liters of power.С. Fuel is consumed in an amount of 1.2 liters / h, so the fuel consistency may be enough to work for 30-40 minutes with a critical load on the tool. The more power a chainsaw has, the smaller the size of its fuel tank.

See also  Why the Soyuzmash Pe 1300 does not work

chain saw chain only with special oils, the quality of which is guaranteed by the tool manufacturer. Chainsaw manufacturers create special oils with adhesive additives that provide high quality chain lubrication by keeping the lubricant composition on the chain for a long time.

It is better not to save on buying oil by buying cheap kinds of oil, but to take glue immediately, so that the saw chains and the tool itself don’t break. This can reduce the damage caused, as the price of the oil pump, chainsaw, and tires is significantly less after they are broken.

Other disadvantages of non-adhesive oil implementation include leakage from the tank of an inoperative tool. Because the viscosity of the lubricant is not up to standard during the pumping process, it does not come out in the right quantity, in other words more or less. As a consequence, it will not be correct to use oils and fuel in equal quantities.

The main points in a nutshell

Knowing what kind of oil you can put in your chainsaw as chain lubricant makes it productive and longlife. Lubricant must meet the following criteria:

  • Increased adhesion.
  • Additives to prevent scuffing and premature wear.
  • Rapid decomposition in natural conditions.
  • Sufficient viscosity and fluidity at the right air temperature.

The main purpose of the oil is to lubricate the chain guide, idler sprocket and idler sprocket. The lubricant should always be at a certain level in the oil reservoir on the saw. Lack of it can lead to chain breakage and damage to the appliance. in addition, the quality of the lubricating substance is important. It is best to use products from STIHL, Husqvarna, Makita and some other popular brands. As an option, in case of an emergency, engine oil or waste oil can be used for short-term operation.

Related Posts

| Denial of responsibility | Contacts |RSS