What you can cut plastic corners with?
The best trimmer is a fine-toothed hacksaw. First you need to measure the length of the opening, then mark on the corner itself so that the cut corresponds to this parameter.
If you are wondering what to glue plastic corners to the panels. the best solution for you will be polyurethane adhesive. This glue has many advantages over others: elasticity combined with strength, one composition, leaves no dirt, chemical inertness, reliability. Liquid nails.
Chisel for baseboards
The carpenter’s chair is a device for making cuts at a certain angle. It is used with a hacksaw. In principle, you can make a chisel without the help of others, collecting the guide from boards and making cuts in the walls. On sale, there are different models with ranging from 15 to several hundred bucks. They differ in ability, materials, although they are all called the “chisel. Professional models are made on the basis of a good hacksaw, and have a scale that allows you to align the saw properly. With such tools is not a problem to set any suitable cutting angle to cut the plinth for a perfect fit.
The Professional Carpentry Jigsaw is a tool with a wide range of uses
The most ordinary plier is a plastic U-shaped profile, in the walls of which are formed slots. These slots are used as a guide for the hacksaw. They do not allow the blade to deflect. In either case, there are two cuts. straight and 45 degrees. In some may be a couple more options.
How to saw a skirting board under 45 degrees? One of the methods is to use a jigsaw
From time to time the hacksaw is included, from time to time it is not. Usually the ones that are included are not very good. You can use any saw, selecting the blade under the material to be cut. It is principally important that the blade can move freely in the slots.
How and what to fix
The most common, less time-consuming and fairly reliable method of attachment. the use of universal quick-drying adhesives such as “liquid nails”. The disadvantages of this method can include:
- When you disassemble (if necessary) the product will likely be spoiled, so it runs into the category of “disposable” at first.
- The inner surface of the tack must have a fairly wide flat strip for the ability to apply the required amount of glue.
If the supply set of plastic floor plinth includes fasteners: iron (or plastic staples) or special long profiles, then first they are fixed to the wall with dowels and screws. The installation is simple enough. The product neatly snapped on the already fixed devices. The advantages of this method include: the possibility of repeated dismantling (especially convenient when changing wallpaper: the lower edge of the wall design can be brought behind the skirting board).
The presence of the cable channel with a decorative external strip allows you to simply screw such fillet to the wall through pre-drilled holes.
How to Cut a Corner on plastic corners
There is no person who at least once in his life has not faced the need to repair the. Some prefer to save a certain amount of money and trust the performance of work to specialists. Others, on the contrary, want to do all the work without the help of others. So it will be useful to learn all about the technology of some works, so that later to apply knowledge in practice.
Now we will talk about a fundamental component of any repair. the installation of ceiling plinth.
The most difficult in performing this type of work is the design of the corner. It is necessary to neatly and accurately join the strips, because it may hurt the appearance of decor. Do not understand how to dock ceiling plinth in the corners? Don’t know in your own strength? Then already prefabricated blanks are used, which are installed in the corners.
However, when connected together, the ceiling elements look more harmonious. Well, and on special angle elements profit extra money. What is needed, how to dock ceiling plinth in the corners correctly, how to correctly treat the joint?
Features ceiling plinth
Skirting board. One of the fundamental decorative parts. It allows you to hide the various imperfections of the repair. Fix it when the room will be pasted wallpaper. Ceiling skirting boards are placed at the junction of the ceiling and walls.
The choice of skirting board should be taken seriously. Correctly chosen model and size ceiling plinth be visually increase the space. Next, let’s look at how to connect the ceiling plinth in the corners correctly.
How to trim baguette?
Modern domestic manufacturers offer a wide range of ceiling plinths. They are made of plastic, plastic foam, wood, polyurethane foam, plaster.
Of wood skirting boards look more aristocratic, alas work with it is not possible. This also applies to the plaster.
When, ceiling plinths are still called baguettes and friezes.
For trimming there are variations can be useful different tools, which can easily be found in every family. With a knife or other scissors there is an option of just cutting polystyrene foam strips. Wood saw is used for cutting wood baseboard. A metal hacksaw is needed for cutting plastic skirting boards.
What the jigsaw is for?
The chisel is a special tool used to trim baguettes in a very clear manner. This is a special tray, which consists of 3 boards connected to each other. There are special slots. Any there placed at a certain angle relative to the axis (45, 60 and 90 degrees). They are designed to guide the hacksaw blade correctly at the time of trimming.
The chisel can be purchased at a hardware store. You may need it not so much for trimming ceiling plinths, but additionally then for other types of work.
Trimming in a jig
The chair is useful for a possibility to truly and perfectly join the ceiling plinth in the corners. Let’s see how to correctly perform this function.
The right strip of ceiling plinth should be placed in the tray on the left side with the wrong side on the bottom. Then this same part will be in contact with the ceiling.
It is necessary to press a plank tightly to the tool and neatly cut it through a slit.
Then the second ceiling plank is inserted into the tray from the right to the left. Carefully trim it.
Ready planking is put between each other and adjust joint places with a knife. Doubt how to connect the ceiling plinth in the corners correctly? Certainly the right method. When decorating the inner corner adjacent to the wall edge may be longer than that adjacent to the ceiling. When finishing an outside corner. opposite.
How to join a ceiling plinth in the corners? This function is performed without assistance from others, rising to the ceiling of the room on a stepladder. But it’s awkward. Therefore, some experts advise to glue the polymer and foam elements on the floor immediately with a special adhesive. It’s pretty easy and great.
If there is no chair
What to do if you don’t have a chisel nearby? It is not difficult at all without the use of a special device to fit the strips. There are 4.5 methods to solve this problem quickly:
How to perfectly cut corners at 45°? Tips for working with plastic.
How to perfectly cut corners at 45°? Great trimming tips for plastics. Trimming corners with one hand! Quickly.
How to glue plastic corners on soffits
Kraftool metal scissors for cutting plastic corners. How to glue plastic corners on.
If you do not have at hand a special tool, then how to cut the corner on the ceiling plinth? It’s easy, because you can build this device yourself.
- Drawing two parallel lines on a smooth plywood sheet.
- Place a dot on one of them. Using a protractor, connect it to the opposite line at an angle of 45 0. Draw the line for the trimmer to the left side.
- From the first point at a distance of 10 cm put the second point.
- Connect it at an angle of 45 0 to the second line drawn to the right side.
Homemade plinth is ready. Just place the right ceiling element on the right side with the bottom edge on the line closest to you and trim along the line. Do the same with the left plank, applying it to the left side.
In the second case, the procedure is as follows:
How To Drill Acrylic And Other Brittle Plastics
- The left stripe is pressed firmly to the ceiling.
- Follow the upper edge of the skirting board and draw a trimmer line directly across the ceiling.
- Put the second ceiling element to the ceiling and drew the second line to the upper edge of the trimmer.
- At the intersection of these lines, a mark is placed on the left-hand element.
- Put the right element and also put a mark on it at the intersection.
- On each strip connect the mark with the end of the bottom edge of the baseboard. The plinth is cut at an angle along the obtained line.
Such a method allows you to accurately cut a corner on the ceiling plinth.
The installation steps start with the selection of the adhesive mixture. Polyurethane-based glue perfectly fixes the PVC elements, making it possible to frame the plane to be loaded.
- Provides an opportunity to glue the details in the bathroom, when the ceramic tiles will be glued.
- Silicone sealant is used for fasteners with less load.
Corner is glued at the expense of liquid nails, when the border of a dark color, it is possible to glue at the expense of a black composition, for light and whitish variants the colorless form is suitable.
How to cut and glue the corners on door and window jambs
When the doors and windows are installed, you need to deal with finishing lining, as a rule, it is the final stage. To hide minor roughness and complete the aesthetic appearance, many people use prefabricated corners. How to cut and glue a corner made of plastic, cork or fiberboard? The following is a detailed guide to their installation.
Let’s start with the most important. why is it necessary?? What role do the corners play. only decorative or they have more serious functions? Let’s not argue that if you frame the jambs of doors or windows with special decorative elements that fit perfectly into the design of the room, then the interior will immediately change for the better.
But they also have an important protective function. Sooner or later we have to carry bulky things through the opening, which is fraught with damage to the corners, and you can just accidentally bump into the outer corner and damage it. There can be many situations, most importantly, the result is the same. a ruined surface and, accordingly, the appearance of. In addition, experience shows that more often than not the wallpaper starts to peel off in these places. So it is best to protect the outer corner of the slope with a decorative element, which in addition will transform the interior.
Corners. it is not only protection, but also a neat aesthetic appearance
Corners to protect the corners of the walls: options for selection
This method of design wall corners. protective corners. not everyone likes it, but there is no special alternatives. At least in the walls with wallpaper, the corner is still better than protruding and torn cloths.
Available only one solution to the integrity of the wallpaper without the use of decorative corners. to make not a sharp corner of the slope, and rounded. In this case, there will be no problem with its finishing. It will be possible to simply wrap the sheet of wallpaper without cutting it. But to withdraw the corner is absolutely necessary, otherwise you will again have to cut, and, therefore, again there will be a question of protecting the junction of wallpaper on the corner.
It is important to correctly select a decorative corner, so it does not look alien. To do this, there are special techniques.
The interior in the appropriate style looks good
Choose corners to protect the corners of the walls should be based on the overall design of the room. There are several standard solutions:
Either match the wall finish or match the door finish
Tone in tone with doors. Material is better to choose the same. wood, fiberboard. And the coloring should be identical. This method is often used in hallways and corridors, where there are many doors. In the rooms, it is more appropriate to match the tone of the walls. In the case of skirting boards.
Use one of the additional colors (about a combination of colors in the interior read here), which will not only be in the corners, and in framing pictures or in upholstery panels, decorative medallions, etc.д. 1-th color and texture with the floor covering.
In general, to select the corners to protect the corners of the walls should be tied to the design room. This can be done after the furniture is arranged and textiles are hung. In this case it is easier to present the final result. As the picture in our heads can be very different from reality.
How To Cut & Install Crown Moulding
If you well do not manage to pick up an acceptable color, but the corners of the apartment to protect, direct attention to the transparent plastic corners. They are of different kinds. rigid, flexible, with different widths of the wall
How to cut and glue the corners on the door and window soffits
When the doors and windows are installed, you need to deal with the finishing of the lining, as a rule, this is the final stage. To hide minor irregularities and give a complete aesthetic appearance, many people use prefabricated corners. How to properly cut and glue a corner made of plastic, cork or fiberboard? Here are detailed recommendations on how to install them.
Let’s start with the most important. why is it necessary? What role do the corners play. only decorative or they have more serious functions? Let’s not argue that if you frame the slopes of doors or windows with special decorative elements that fit perfectly into the design of the room, then the interior will immediately change for the better.
But besides this, they also perform a very important protective function. Sooner or later you have to carry bulky things through the opening, which is fraught with damage to the corners, and you can just accidentally hit the outer corner and damage it. There can be many situations, but the main result is the same. a damaged surface and, accordingly, the view. In addition, as practice shows, most often the wallpaper begins to peel off in these places. So it is best to protect the outer corner of the slope with a decorative element, which will also transform the interior.
Corners. is not only protection, but also a neat aesthetic appearance
The process of forming corners can vary considerably. Each method has its own distinctive features, which must necessarily be taken into account when performing the work. Deciding to use certain ways, it is worth to understand how to cut off the excess material in each case.
Using a stencil
The method is relevant in the design of the floor surface in rooms with a non-standard configuration. In that case, other methods become an unsuitable option. They make it quite difficult to get the cutting edge in the right direction. Have to constantly adjust the configuration of the plinth, until you get the desired shape.
Avoid errors in the formation of the surface allows the manufacture of the stencil, which repeats the configuration of the non-standard wall quite accurately. It is made of thin cardboard or rather thick paper. Its thickness should be fully consistent with the thickness of the floor plinth.
The work is carried out in the following sequence:
- prepare the material of a suitable thickness and length. It must have sufficient rigidity not to deform in the course of the work;
- lay the cardboard as close as possible to the wall. On this step depends largely on the final result. If the stencil will not be qualitative, it will have to adjust each element in place, which will significantly increase the duration of the work;
- Using a stationery knife to remove excess material, achieving a complete alignment of the cutting line and the configuration of the wall. An electric jigsaw can be used instead of a utility knife. However, in this case it is necessary to have sufficient qualification to perform quality work. Otherwise it will not be possible to repeat the required configuration accurately enough. cutting trimmer line must be perpendicular to the mating line of the wall surfaces;
- control the quality of the made template;
- Cut the mating fragments of the skirting boards according to a prepared template;
- check the quality of the work done;
- install the skirting boards.
Using the power drill
The chisel is an indispensable device, widely used in various types of finishing work. The design of the product makes it possible to cut a fragment at the right angle. The U-shaped device has special slots, which are used as guides when cutting fragments to size.
To cut a section of skirting board of the desired length, the product is placed inside the mash, pressed with the wrong side. If you lay the skirting boards with their front side facing forward, there is a risk that it will be damaged when cutting the product. The edge of the panel in this case is placed so that the edge of the panel remains inside the diagonal slit.
Attention! If the size of the mash exceeds the geometric parameters of the skirting, it is worth taking care that the product is pressed evenly to the groove side of the device. Only then can the skirting be cut to size
Using a pencil and a ruler
Not everyone has a special tool. To buy it requires free funds. Not everyone is able to make a quality template. Even a slight deviation from the required parameters will significantly worsen the final result. In this case it is possible to use a sheet, a pencil and a ruler.
The work is performed in the following sequence:
- Measurements are made on the surface of the wall;
- The obtained values are transferred to the plastic skirting board, on which, using a pencil, a line is formed for the trimmer of the future cut;
- The surplus material is cut with the tool of your choice.
Attention! With a complex configuration of the floor surface to measure the corners of the room will need special care, repeatedly double-checking the obtained values. This prevents errors
Adjusting on site
Even careful preparation and measurement of the geometry of the wall does not always result in an exact cut line. In that case we have to adjust the skirting on site, removing the excessive amount of material. When trimming a skirting board “on site”, place it as close as possible to the wall surface adjacent to the floor surface. Mark a trimmer line directly on the product, along which the excess material should be cut off. While cutting, the cutting tool is positioned in such a way, that the slope of the cutting tool is 45 degrees in relation to the center of the profile angle.