All you need to know about the tools for collecting costume jewelry
Creating beautiful costume jewelry at home is absolutely impossible without the proper tools. On their correct choice will depend both the appearance of the finished products, and the ease of work. That is, the amount of pleasure you can get from the process and the result of your needlework. Therefore, it is worth paying a little attention to this side of creativity.
What tools are used for what?
The main tools when making jewelry are pliers (or side cutters), fine pliers, and round pliers.
Diagonal cutters are a cutting tool. They are used to bite through wire, string, and other metal items. Knives and scissors are not good for this job, but wire cutters cut the edges more accurately without making jagged edges. This makes it easier and quicker to assemble. This property of wire cutters is especially relevant in the process of stringing elements on wire and string. Pliers are sometimes found on needle-nose pliers and similar tools as part of the jaws’ working plane. Only usually it is uncomfortable to use such pliers in jewelry, plus they quickly dull and become unusable. Professional diagonal cutters are made of strong steel, so they last a lot longer. Diagonal cutters can be equipped with a special lever-action mechanism that helps you to apply minimal force when biting off wire.
Circular pliers are used for manipulating wire and pins. You can use them to make rings on the ends of the pins without much effort. You can make a ring with a minimum diameter similar to a pin ring, or you can make a twisted pin ring with several layers of layers. The tips of the needle-nose pliers are made in the shape of cones, which makes it possible to make ear-rings of different diameters. If you squeeze the pin at the very tips of the tool, you get a ring with a minimum diameter. Using round pliers, the wire is also used to make spirals and perform a variety of other elements. Pliers’ tips can be identical or even different, one tapered and the other flat. As you work your way through practice, you’ll see which needle-nose pliers are best for your handiwork.
Pliers (or needle-nose pliers) have their own distinctive feature: they have flat jaws that are either smooth or fluted on the inner plane. Usually they are used to hold the elements, as well as to unlock all kinds of rings, links on chains or to clamp crimps. When opening rings, you need a second pair of pliers. If only one pair of pliers is available, they are used at the same time as the round pliers. Working with knurled pliers, remember that they can make nicks, scratches or other damage to products, which does not happen when working with pliers with a smooth surface of the jaws. However, smooth-jawed pliers are not suitable for crimping because they do not hold items as tenaciously.
There are also pliers that have curved jaws. They work on the same principle as a pair of pliers, and are very useful when you need to open the rings and as a holding tool.
There are multi-purpose tools that combine several different tools in one base (e.g. a combination of pliers, crimper and wire cutters). How convenient they are, you can understand only in practice, as it is difficult to work with them during prolonged monotonous manipulations.
Masters use many more different tools, which, if you wish, can be replaced by others, but they make the work of creating costume jewelry much easier. So, for example, rings with double twist, made of strong wire of considerable diameter, can be easily unscrewed with a special tool.
A very useful tool when assembling jewelry, the caliper is an accurate measuring instrument that allows the craftswoman to accurately measure the diameter of the hole and the size of the bead itself or other elements when assembling. The caliper will also show the thickness of small items such as pins, crimps, or wire with maximum accuracy. to tenths of a millimeter. And an electronic caliper is capable of showing dimensions to within a hundredth of a millimeter.
In addition to all these important tools, you should naturally have scissors, a centimeter, and containers. Boxes and assorted jars to store beads and glass beads with accessories. You must be attentive to your work table illumination, because ambient light usually is not enough for your work, even if the table is in a very good position. A great choice is a lamp with long arms that can be adjusted and with a clamp for attaching it to the table. It can illuminate a space at different angles, the clamp prevents the lamp from falling down in case of an accidental jolt, plus you save space on the table to work.
How to choose tools for jewelry making
Tools for costume jewelry should not only be convenient to work with, but also meet certain requirements, as well as the materials themselves for jewelry making. So, using round pliers, pliers, wire cutters, narrow pliers are made pins, scrolls, loops and the like elements that require precision in the application of force of hands, so they must have a rubberized grip to prevent slipping hands during work. It will be very good if the handles will be ergonomic, that is taking into account the anatomic features of the hands.
It is also better to choose tools that have handles with springs. After all, it’s much more convenient when the tool jaws move apart on their own after the operation is complete. The spring that keeps the handles open is installed below the handle joint axis and you can visually identify a tool with this option.
Other important characteristics to take into account when choosing are the smoothness of the jaws and whether they are in perfect contact with each other. If they are not, you get sloppy work: spirals and loops will be uneven and the rough surface of the handles will leave scratches on the fittings.
Masters advise to have at least some round pliers with different diameter of jaws.
Pliers, in addition to rubberized handles, should have sharp jaws that will perfectly contact with each other to make an even cut. Also, their handles should be slightly larger than the size of your hand.
Special side cutters for jewelry have only one bevel on the cutting surface: this design feature eliminates the need to handle the sharp edges of the wire.
In general, all examined tools should have rather small dimensions (up to 15 centimeters in length), because the jewelry making process is very complicated and can have very small dimensions. This is a jeweler’s work, and carpenter’s and construction tools are not suitable for this task.
When choosing other tools for creating costume jewellery, you should be guided by your specific tasks and intuition: assembly boards, tweezers and rhinestone pencils differ slightly from each other.
Of course, only quality tools meet all of these requirements and this has an impact on their price. Online store World of Beads offers its customers tools from trusted manufacturers at the most reasonable prices. Please note our wide range and high quality tools that will simplify your jewelry making process and give you the best chance to enjoy the jewelry making process!
Jewelry wire. what it is and what are its advantages
Jewelry ropes have started to be used in jewelry making in the last few years instead of fishing line and wire. Also they are now known as the jewelry lanky. Pr.
Ribbon embroidery for beginners: materials, tools, basic stitches
Cross embroidery by skilled women began in ancient times, at the dawn of weaving. The first woven fabrics were rough and single-color, and uncomplicated in the performance of embroidery cre.
Making a bracelet from memory wire. step by step master class
Making a bracelet out of memori wire step by step master class Crafts lovers have long appreciated the ornamental qualities of memori wire. It is very convenient to create bracelets.
At all times original handmade jewelry has enjoyed great popularity, because it is not only hard work, but also beautiful jewelry that emphasizes the personality of its owner. In today’s world, making handmade jewelry has become an art form. Such costume jewelry becomes more and more popular every year. People are much more attracted to unusual and beautiful handmade jewelry than to jewelry. This can be explained by the fact that jewelry is made according to a template, but handmade costume jewelry does not need any framework, handmade women make jewelry following the call of her soul, and that is probably why it is so widely valued.
1/AppData/Local/Temp/msohtmlclip1/01/clip_image004.jpg” / In order to make creative costume jewelry, you just need to have patience, imagination and purchase materials for costume jewelry. Every woman dreams to be individual. And handmade costume jewelry will help you in this, because no one else will have the same jewelry as you, which will emphasize your charm and uniqueness.
Needlewomen use different materials to make unusual jewelry. In our fashion jewelry online store you can find a big variety of assortment for your jewelry making, including stone beads, bead caps, earring findings, bead dividers and frames, bead bases, bead locks, bead caps, vintage pendants, crystal swarovski pearls, finished bracelet pendants, metal beads and so on. With so many products to choose from, you can create all kinds of jewelry using your imagination. Only our costume jewellery accessories are of high quality. You can buy the materials for jewelry making without leaving home, just order them from our website and they will be delivered to you as soon as possible. It is important for our store that the customer is satisfied, so we sell only reliable products. Every month we try to expand our collection of accessories for jewelry and please our regular customers with new items.
1/AppData/Local/Temp/msohtmlclip1/01/clip_image016.jpg” / The art of needlework is an important mission, which requires patience, because it is not always possible to quickly make jewelry. But for the lovers of the craft, every minute spent on work is a real pleasure. Thanks to such a wonderful hobby, many women who like to create jewelry, can begin to make good money. The fact that even many rich people prefer to have unique jewelry. That is why the price of handmade jewelry is getting more expensive every year. There are several techniques for making costume jewelry:. knotting technique;. Stringing beads;. Making bijouterie with fishing line and stopper;. making jewellery with rings, nails, chains, and costume jewellery pins;. Using pliers and round pliers;. The use of beads, findings and chain
It is clear that in order to make such masterpieces you should have a real talent or at least a fantasy. But nevertheless, even if you do not have enough talent, you can always make the same costume jewelry that has already been invented before you. All you need to do is to buy the costume jewellery materials you like in the e-shop and get creative. In addition, to make an ordinary bracelet or beads is possible for everyone. Still you can experiment, then it is possible that soon you will get a masterpiece.
1/AppData/Local/Temp/msohtmlclip1/01/clip_image022.jpg” / With the help of accessories for jewelry you can perfectly spice up your work and even change a simple thing beyond recognition. Fittings are in good demand, because by using them, the thing becomes bright, memorable and fashionable. Accessories are a variety of factory-made items that will give your jewelry pieces jewelry style and completeness of appearance. Some women do not like to use accessories, because they want the effect of full handmade. But for example, even earrings cannot be made without using accessories. The advantage of using accessories is its variety, so to refuse to use them in your work just silly. You can order the best quality tools for your jewelry making in our fashion jewelry store:. Beads for bracelets and necklaces;. earring bases;
Tools for making jewelry by your own hands
Fabulous info on wire
Tools needed to work with wire
Circle Pliers. are used for twisting wire and pins into rings and spirals. If you’re going to assemble beads once and give it all up, you don’t have to buy. In all other cases it is necessary. The thinner and tinier you find the round pliers the better.
Pliers with smooth pads. Needed for wire and pin work. Don’t leave such ugly marks on them as the ones with knurled pads.
Pliers with knurled pads. You need them to clamp something. like a clamp or a wiretip. They differ from the previous ones in their grip strength. These pads hold ball and barrel clamps better.
Side cutters. Wire, pin, and even jewelry wire cannot be cut with scissors. For this there are side cutters or wire cutters.
Wire. absolutely amazing material. We see it all around us every day, and have long been accustomed to its everyday use. But just remember! I am sure, that every girl once upon a time in her childhood used to weave different jewelry with thin wires in beautiful multi-colored insulation. 🙂 But then we grew up and forgot all this, and meanwhile, quite undeservedly. What Wire is Available? How to work with it? What we can make out of it? That’s what we’ll talk about.
For wire, the most important characteristics are probably the cross section diameter, its shape, the metal, and its basic properties.
Section. The size of the cross-section can be different. If it’s a technical wire, there are a lot of options, if you take a specialized jewelry or jewelry-making wire, then most often certain standards are used. Here’s a chart showing these popular sizes, along with a translation from gauge. American Wire Thickness Measurement System) to the metric system.
gauge = 2.0 mm 14. gauge = 1.6 mm 16. gauge = 1.3 mm 18. gauge = 1 mm 20. gauge = 0.8 mm 22. gauge = 0.6 mm 24. gauge = 0.5 mm 26. gauge = 0.4 mm 28. gauge = 0.3 mm 30. gauge = 0.2 mm
Form of cross-section. In addition to size, shape is another characteristic of the cross section. Wire sold in stores can have circular, semi-circular, flat, and square cross-sections.
Properties. The next important characteristic. Softness of wire and its ability to hold shape. Any specialized wire for costume jewelry and jewelry making is best. Unlike technical wire, this one is originally made of alloys and metals that bend well in work, but are resilient and retain the shape of the finished product.
Metal. There is another important aspect: the metal of which the wire is made? Let’s look at this question in more detail, because it also determines the range of its application.
How to get it: In my opinion, the most versatile metal. It’s very easy to get it: in any store where wire is sold, you can buy it at any time, even if it’s not a big seller. You only need to ask for the one with the copper core inside the insulation. Then you choose the desired thickness and length. To get rid of the insulation is quite simple, by cutting a sharp knife along the wire tangentially to the core, and then removing the remnants with your hands.
Still copper wire (brass or bronze) with coatings of different colors (about coatings of precious metals discussed below) can be purchased in specialty stores for needlework (wire beading).
What we have: one thick, a few thinner or many thin wires without lacquer coating, depending on the type of cable purchased (you can also get lacquered copper in coils, but it is rarely used in this form for jewelry). Or a wire from a craft store, in the color and size of your choice.
Color: pure copper. It is a beautiful golden-yellow metal, which also looks good on its own, but if desired, you can apply different treatments to achieve various color effects. For example, patching with ammonia (aging effect) or firing with boric acid (gives a pink color).
Usage: wire of almost any diameter is ideal for making doll frames: for example, the thinnest. For the fingers of the hand, the thickest (
5 mm) for the “spine” of the doll. Copper has the advantage that it can be easily bent and unbent a large number of times without fear of breaking. This is very important, t.к. Sometimes the pose for the doll has to be changed more than once. Copper is also used very well in costume jewelry. Scope: as far as the imagination allows. Also suitable for any creative projects and sculptures. I would also advise using copper for those who want to practice working with the wire.
Advantages: very pliable wire, which is also not afraid of repeated bending in the same place. Unbreakable. Easy to cut with wire cutters and bend even by hand if not too thick. Beautiful colors that can be changed in simple ways, even at home.
Disadvantages: these again include the great softness and inability to hold the shape of the finished product, unless copper in the form of elastic alloys is used.
Bronze and brass have similar properties that can also be used in creating costume jewelry in other creative wirework.
How to get: at market stalls and hardware stores. Color: steel, gray. Uses: for creating wire sculptures, frameworks for dolls, weaving ringlets and decorative chains. Advantages: very good shape retention, easy to obtain Disadvantages: Heavy metal, very difficult to bend.
Let us turn to wires with precious metals, which are the most suitable for the creation of costume jewellery. They are characterized by some common points:
How to get: Sold in specialized stores, craft stores, or jewelry shops. Color: most often gold or silver. Applications: Costume jewelry in various techniques, jewelry making, wire sculpture.
A small digression: Gold or silver assay indicates the precious metal in a particular alloy. For example, 925 sterling silver means that this alloy contains 925 parts of pure silver and 75 parts of alloys of other metals. There is a metric and a carat system of proofs. One carat is the 200 mg weight unit of a precious stone. According to this system, a metric sample with a value of 1,000 is equivalent to 24 carats. To convert one sample into another, a 24/1000 ratio is used, according to which, for example, a metric 750 sample corresponds to an 18-carat sample.
Precious metal plated wire (silver plated, gold plated, silver plated)
Advantages: most often it is copper wire made of resilient alloys that retain their shape well, coated. Accordingly, this wire has the same positive qualities as copper wire: it bends well, breaks badly and is easily cut. Disadvantages: the coating is thin and easily damaged. Also can not be ruled out by active wear of the product. A cut of silver-plated wire can show a yellowish copper appearance. Silver wire (silver)
Here I would like to focus on the silver itself, t.к. All the advantages and disadvantages come from the purity of the alloy.
Advantages: quite soft and pliable material. Sterling silver is most commonly used and is able to provide excellent shape and wearability. Disadvantages: Pure silver is too soft and unable to hold its shape, so it is used in jewelry only for a small number of works, such as filigree. I would also like to note that the lower the alloy, the greater the likelihood of oxidation in the form of black plaque on the surface. This is already characteristic for 830 and 800 grades.
Gold wire (gold) and gold filled wire (gold filled)
gold filled. is a wire consisting of a copper (most often) core on which a layer of gold is stamped by pressure and temperature. In this case, we have a much thicker coating than plating. It is resistant to damage, does not wear out for decades in everyday use and maintains the hypoallergenic properties of gold. In the wire for the coating is usually used 10, 12 and 14 karat gold.
Gold wire is found less frequently and costs more, but is not afraid to expose over time its non-gold core.
Advantages: The material is quite soft and pliable. Disadvantages: The pure gold itself. It is a very soft metal (even softer than silver). That’s why we always see it in alloys that make it harder and able to hold its shape. In its pure form, just like pure silver, it is used only in some techniques of jewelry making. I would also like to note that the lower the assay, the greater the chance of oxidation in the form of a black deposit on the surface.
Conclusions: we have considered the most popular and common materials and now you only have to choose what to work with, and it depends on how you are going to use the wire. For beginners in the field of bijouterie creation, I can advise copper: a cheap material, which is not difficult to get, it will take all the abuse and allow you to get a pretty good result with the least effort. After you train and decide that you like it and would like to go to more complex and expensive materials, you can pay attention to the wire of precious metals or with their sputtering. Wire Jewelry Making Techniques
Costume jewelry wire is a very malleable material with great potential for use in jewelry design. It comes in different colors and diameters and is made of aluminum, copper and silver. The most common diameters are 0.2mm, 0.4mm, 0.6mm, 0.8mm and 1mm. The thinnest wire is used for weaving objects, the thickest wire is used for making accessories, and medium wire diameters are used for braiding beads and producing openwork and shaped elements. The most popular wire colors are natural copper and steel, and also dyed gold and black. Colored wire is used for production of accessories for jewelry based on colored chains or multicolored plastic beads under the polished metal. Trees and flowers are braided in French technique with green wire. To work with wire, use special pliers with a smoothed inside surface that do not scratch the wire. There is a specialized tool in the form of pliers with removable nylon pads, which is used to straighten twisted wire. Round pliers are used not only for creation of lugs, but also for production of shaped and geometric elements and spirals. To cut the wire, you can use wire cutters, which are located on the inside of pliers and round pliers, but it would be better to use side cutters, which are made of a stronger alloy. You can also work with wire in textile crochet techniques and create air cords.
Basic costume jewelry findings made of wire. With colored wire you can make colored accessories. Such fittings bring an unusual brightness, make it possible to make monochrome decorations and match the color of fittings with other bases, for example, painted aluminum chains. There are several other advantages of manufacturing fittings from wire. First, you always cut exactly the length you need from the wire to create the pin or nail, thereby reducing the amount of waste. Secondly, from the wire you can make especially long pins or studs for large-diameter beads. The most basic costume jewellery accessories, such as nails, pins and rings, can be made in any color from 0.6 to 1mm diameter wire, depending on the size; the longer the item, the thicker the wire to be used. Wire nails can be made in several ways. The easiest variant is to gently flatten or file the tip of the wire or twist it into a spiral. Slightly more difficult variant, when the tip of the wire is melted on the burner fire, until you get a round droplet, which looks very nice in the finished product. Creating lugs on both sides of a piece of wire results in a pin. In addition to the wire pins production method, it is possible to increase the reliability of the beads connection. for the eye of the pin, you need to measure a long length of wire, which is spirally wound around the base of the eye, put a piece through the bead and repeat the eye with a spiral base. Decorations based on these pins do not tear even when overloaded. The production of the bijouterie rings takes place as follows: the rings are cut with wire cutters from a wire spiral, which is obtained by winding the wire in coils with the help of a “Gizmo” coil spring machine. This tool consists of a twisting knobs in the form of tubes of various diameters, which are inserted into the U-shaped base.
Specialized accessories and wire bases. Colored spring substitutes for tubes can also be made with the Gizmo. From the wire, you can create T-shaped and L-shaped locks in the form of a shaped object of appropriate shape on one side and a double asymmetrical spiral with an expanded inner hole on the other. Hugs of round, oval and square cross-section can be made from a spiral wound on top of a bead, repeating its round or oval shape. The easiest way to use a spiral shape, a little more complicated. to roll a frame separately, which is fixed with thin wire and optionally decorated with small beads. Wire is often used as a clamp for fixing the bundles of bases inside the caps. Thin wire can be used to replace connectors by cross wrapping it around rows of bases. Silvered wire can be used to make pins and decorate the eye area. The wire can be used as a base, twisting it with rope or making shaped shapes for wide decorations.
Basket weaving. The wire can also help when the item you want to use in your jewelry has no holes. Frames for cabochon wire can be of very different types, depending on the shape and weight of a stone. Thick wire forms the frame of the frame, and thin wire serves to connect the parts of the base, making the whole structure rigid. Small stones can have an airy, light frame made of spiral and wavy elements. If the stone is large and heavy, they cannot do without the dense backing, whose “teeth” hold the cabochon from the front side. The advantage of wire as a material for braiding cabochons is that the shape of the frame can be rather ornate, but if you connect the openwork elements on the front side with a solid framework on the back side using thinner wire, the entire structure becomes quite strong. If the surface of the cabochon is flat and sufficiently large, it can be sculpted into a spiral or scroll. A wire frame for heavy cabochons is made according to the basket weaving principle, when the base is woven in rows around the frame. The most interesting effects are obtained by braiding shaped shapes and using complicated techniques. braiding in a row, passing several rows, combining different wire colors. Frames of lampshades, candlesticks, frames and caskets are wrapped in the technique of basket weaving.
Openwork and connecting elements of wire. Openwork and connecting elements in the form of monogram pendants are created on the basis of a special tool “Wig Jig”, which is a transparent plastic basis with lots of vertical holes into which pins of different diameter are inserted. A variety of monogram shapes can be twisted around them. At the intersections of the wire, it is flattened by a hammer with a soft nylon head. This tool can be used to make neat elements of a standard shape and the same size. When making venzel shapes to be used as connecting pins to avoid deformation, it makes sense to either create elements with a firmly twisted inside, or work with the tightest wire soldered at the intersections. To make spring-based connectors, use gizmo. It will allow you not only to make springs with ears on both sides, but also to make a corolla, which is a spring that is re-twisted around the tube gizmo. In order to prevent the spiral from unraveling, it is desirable to put it on a pin.
Geometric and shaped wire pendants. To create spirals, you can use a small auxiliary tool in the form of a plastic cylinder with several holes, where the wire enters, which winds in a spiral around a central pin. Various geometric and shaped flat pendants in the form of meander, zigzags, triangles, fish and butterflies can be made using ordinary round pliers for rounding or flat pliers for triangular bending. Using a fine wire of 0,4-0,6 mm diameter with beads strung on it, pendants of flat or volumetric shape are made. Such pendants can be solid or compound with moving parts. The spirals and tendrils of wire with beads attached to them have a springing effect and are used for bridal hairstyles. On the basis of the thinnest wire diameter of 0.2 mm can bead sculptures in the shape of animals, cartoon characters. On its basis it is possible to create shaped pendants in the form of various fruits, flowers, creatures and objects, and also abundant compositions on a lattice basis for rings and brooches. Flowers, leaves and trees are made on the basis of Franzese weaving technique with wire. The thickest wire, 1 mm in diameter, is well suited for making three-dimensional geometrical objects with beads or wire filler.
Beads of wire. Fine wire can be used to make simple and spectacular round and spindle-shaped beads. For this purpose, using a gizmo, the wire is twisted into springs, then slightly stretched and formed into a ball or spindle, the ends of the wire are hidden inside a bead. Such beads made of stranded spiral springs hold their shape well, but are easily pierced with a nail or pin. They can be further embellished by threading beads or small beads onto the source material. You can braid the beads in different ways with 0.4-0.6 mm wire. To do this, the bead is first strung on a pin, the ear of which is spirally and firmly twisted around the axis, then a piece of wire is curved around the bead, the excess is cut off, and the tip is twisted around the base of the opposite ear and hidden in the hole in the bead. A bead can be braided with the wire around its axis or crosswise, on a flat bead you can place a spiral, curl, zigzag or shape closely adhering to it. Rings made of wire can be used to make a variety of weaving chains. The simplest is the series-connected rings, a little more complicated is the ring weave. The peculiarity of this weaving is that not only single rings are connected, but groups of 2, 3, 4 rings are connected to the same groups with one or more rings placed in parallel. From the wire, you can weave beautiful plaits in the Viking chain technique. Because they are light, beautiful, and sturdy, they make an excellent foundation for a pendant or a bracelet. To age the wire products, you should first treat them with an emery or a nail file. After that, the ornament should be placed in a tightly closed container next to a container in which ammonia is poured. After a while, the wire will begin to acquire a noble vintage hue.
Tips and tricks. what to consider when working with wire. It’s best to use the maximum wire diameter to fill the bead hole as completely as possible. The bigger the diameter of the wire, the more resistant it is to abrasion. If the wire can move freely inside the bead hole, it will rub against the edges and eventually tear. Can you pull the wire through the smallest hole in the beads more than once? If so, in order to increase the life of your product you need to use a larger diameter wire. When creating the pieces, when stringing the beads on the wire, leave some distance between the beads so they can move freely and are not restricted in space. To check the real distance between the beads, don’t forget to bend the wire, giving it the shape of the future piece in which it will be worn. You can greatly increase the life of your piece by simply increasing the spacing between the beads. When the beads can move slightly from side to side, the contact with the wire extends over a larger area and this reduces the possibility of rubbing. Choose the appropriate wire for the weight and type of beads used. The heavier the beads, the stronger the wire should be. When working with heavy glass, metal and semi-precious beads make sure that the breaking strength of the wire corresponds to the total weight of the piece plus a certain margin of safety in case you get caught on something. It is also important to carefully deburr the inner surface of the beads’ holes, and smooth out nicks and sharp edges. The beads must slide freely along the wire, and sliding beads are less likely to abrade the wire.
To create beautiful and stylish costume jewelry, you not only need to be proficient in practical skills, which are acquired with experience. Another important condition is to have the right tools in the jewelry maker’s “arsenal. What they should be, and what is important to pay attention to, choosing hand tools?
Tools for making jewelry.
I’m going to show and tell you about a tool that I’ve been using myself for years.
This article, I think, over time, I will add new information, t.к. There are a lot of different devices.
But now, the information for beginners, for those who have taken up jewelry assembly for the first time.
There are professional tools for jewelers and the usual ones that are sold in the home improvement stores.In stores and tool stores. It differs primarily in price, well, and certain nuances.
If you are just a beginner, want to just try to assemble jewelry and can not afford to spend a lot of money on the tool. My advice is simple, go to a hardware store, a radioelectronics store and pick yourself an inexpensive tool, which will allow you to your wallet.
Here is my set of tools. What goes in there:
Several types of pliers, round pliers and side cutters.
I have 5 kinds of pliers, each of which helps me in different situations.
Fifth. are pliers with plastic nozzles (I had them recently, but as it turned out very necessary and useful), which can nip the wire without damaging it, even they are good to straighten the wire, just pull it through the compressed working surface:
You can have just one to start with. These are the pliers, the ectopus pliers. They’re very easy to work with. These are the ones I use the most and the longest:
Another and very important point when selecting pliers. this is the work surface.
It MUST be flat. without relief or irregularities. It should be a good contact-docking of the working surfaces themselves. Otherwise your product will end up with all sorts of dents, scratches and notches!
In the second photo, the thin pliers clearly show a completely flat, even surface (this is because I rarely use them and they look like new :-)))))))) )
The most ideal variant. after purchase, give your husband/brother/friendfriend this tool to polish the working surfaces to a mirror. 🙂
Next. round pliers. They need to be chosen by diameter. It is better not to use large ones, t.к. They will be almost useless for the job. Also pay attention to the work surface. It has to be smooth. After buying, in any case it is necessary to give for polishing, in order not to spoil the wire in the process of making jewelry.
Pliers or side cutters. can look different and in different sizes. But for jewelry making and jewelry making, they use pliers with a flat back surface. It is the surface that gives from the side of this bite surface an even cut, which is exactly what we need.
One more remark about the use. These wire cutters MUST NOT bite through solid wire. т.е. very hard, memory wire (memory wire), t.к. they were not designed for this purpose. Do not experiment, t.к. after that, the cutting surface will be dented and you can’t work with these tools anymore. its way to the trash! Alas.
This is what the back working surface of the side cutters looks like:
We NEED pliers or side cutters like these. Т.к. they have a groove on the back work surface that makes a cone-shaped cut:
Well, one more, absolutely not a necessary tool for a beginner, but very necessary and useful. are the anvil (which surface should also be polished to a shine) and different hammers with polished metal surfaces:
about other tools I use, I’ll tell you next time. 🙂
You can see how to use the tool for jewelry assembly in my Master Classes for beginners:
Thread, fishing line, wire
Beading products cannot be imagined without fishing line and monofilament. String can be taken from a fishing line, and it is possible to take a special one, created especially for beadwork. It is more convenient because it is adapted for creative work. Such thread can be black, transparent, colored. In addition to flax mistresses use monofilament.
Monofilament is more durable, because when stretched the fishing line breaks. But both options are suitable for working with beads, but only in the manufacture of products with a dense weave. They will also be suitable for work on braided plaits, mesh necklaces, embroidery, single-row beads.
The fishing line and monofilament are not suitable for work on openwork collars. Nor can one make multi-row beads on such a base. For embroidery with glass beads and chopping they are also not suitable. As for the wire, and such goods are provided for masters. You can find silver and gold wire, green and red, yellow and purple. Use this product for needle weaving, parallel, French, buttonhole weaving.
For beading, you will need special needles. Unlike sewing needles they differ in that their ear with a large hole that does not expand outward. It is elongated and longer in length. These needles are thin and long, and have the same diameter along their entire length. Needles are flexible, but fragile, and often break in the process of work. And there are also needles without an ear, where the place of attachment of thread is a cleavage or clip.
The needle for embroidery 2 can be considered universal, because it is also suitable for work with beads from 11/0 to 15/0. If you embroider paintings on canvas, the optimum needle will be 2. If you have to work with small material, you have to buy needles for jewelry beads 10-16.
The more elastic the material of the flexible beading needle, the worse it will hold shape. If the needle bends in several places, you can no longer rely on it. The shortest needles for beading. 4 cm (used in weaving or embroidery). Long needles can reach up to 10 cm, and if you need to dial up several beads at once, it is a convenient option. There are also extra-long needles, 12.5 cm, which are indispensable in the set of large cloths.
Used for beading and double needles. They have a rather sharp end on both sides. Such needles are made of a high quality metal alloy. They are made by soldering two very thin needles. And such soldering leads to the fact that the ear in the tool actually folds its entire length.
Whether or not to choose such a product for beginner needleworkers is a moot point. Masters recommend that you first “get a feel for it”, to find your best option of ordinary needles. And only having an idea of the capabilities of ordinary needles, consider more complex options.
Costume jewelry making techniques
Talented, exclusive work of authorship can lift one’s spirits at a glance. And the number of varieties of techniques that exist today allow every fan of handmade to find an accessory for themselves, for their individual taste.
Jewelry Making Tools You ABSOLUTELY NEED To Start Metalsmithing!
Ganutel. “Maltese needlework”. It is weaving artificial flowers with silk threads on a wire frame with the addition of beads and other small components. The Italian word “Canutiglia” translates as “fine twisted thread”. Nuns of Malta have long used ganutel in the interior of churches, including the altar of the Pope. Since the end of the last century, the government of the island has paid a lot of attention to the revival and development of this type of needlework.
The technique is simple to perform. A thin wire is twisted into a spiral, bent into a rim of desired shape and wrapped with threads around the coils of the resulting spring (sometimes wrapped with low beads). Several winding schemes have been developed, which gives the leaves a variety. For strength, a rigid base wire is sometimes inserted into the spiral.
For beauty, other bright components are added, such as a bead in the middle of a flower. Brilliant, elegant, unusual and very light articles in the style of “ganutel” fascinate by their grace.
No special devices are required. You will need:
Polymer clay jewelry
It appeared on free sale relatively recently, but quickly gained wide popularity. The first synthetic plastic. Bakelite. was developed back in 1907., But modern examples of polymer plastic appeared only in the 1980s, and immediately became extremely popular for artistic creativity.
Polymer clay resembles plasticine. just great to crumple. But the molded figure can be fixed by firing or simply by exposure to air. We should not forget about the toxicity of this substance. it is safe to work with it, but it is necessary to exclude its ingestion. This modern analogue of clay is very attractive for needleworkers due to its flexibility, possibility to produce practically any shape, wide color range, color stability. The steps:
- Knife (scalpel);
- Rolling pin;
- A surface for rolling out;
- Oven or microwave for baking;
- Sandpaper, varnish, paint;
- Texture sheets, stacks, cutters (to add texture).
East is a delicate matter. Kanzashi
Kanzashi. “the art of the silk flower”. Japanese needlework to create decorative flowers from satin ribbons with added colorful details. A free translation of the word “kanzashi.”. “hairpin.”. According to history, more than 400 years ago, wooden pins with exotic bouquets attached adorned the most intricate hairstyles of geishas. Not only were they hairpins, but they also acted as amulets against evil forces.
The basis of this style is a bud made up of individual fabric petals. Basic types of petals: oval, round, pointed. The finished leaves are fastened to the base, forming combinations of the most varied shades. Multicolored, multilayered, multi-layered flowers become a work of art. Add rhinestones, sequins, and anything else the author’s creative imagination prompts. Today, fancy bouquets and bows decorate not only hairpins. The exquisite airy look is equally appropriate for accessories and home interiors.
- Ribbons, fabric strips. The best choice is satin ribbons. They fuse well around the edges, fold easily, hold curves well. If using crepe-satin, you must be careful when fusing the slices. Capron and organza are more difficult to fold;
- A tailor’s tape measure or ruler;
- Scissors. necessarily sharp;
- To scorch the edges of the fabric, choose what you are comfortable with: a lighter, blowtorch, candle, curling iron And be careful with the fire!;
- Sewing needles;
- Multicolored threads;
- Transparent glue (or glue gun);
- Hairspray for fixation and fixation;
- Beads, sequins.
Sophistication and variety of shapes
Soutache. sewing on the basis of soutache cord. Creation of volumetric compositions from special braid. Soutache embroidery has been known since the 14th century, when the clothes of European nobility were embellished with convex patterns. In Russia it was first used in the times of Peter the Great. Then only in the theatrical costumes. At the end of the last century, a collection of Israeli jewelers from the famous Dorie Chengeri house sparked a surge of interest in soutache. The combination of jewelry stones and shaped sutazh was a successful design solution and the birth of a new fashion.
Twine is a braid, consisting of two narrow textile cords, tightly woven to each other. It can be recognized by a characteristic groove exactly in the center, along which it is fastened. Made of cotton, silk, synthetics. It is distinguished by its durability, thinness, smoothness and shine of the wrapping, plasticity. It is fastened by neat imperceptible stitches in the chosen pattern, forming intricate and extravagant compositions. It can be used to make necklaces, earrings, bracelets and a variety of styles. The combination of soutage with cabochons and other colorful details gives them an inimitable exquisiteness.
- Soutache cord (the range of colors is very large);
- Needles (sometimes using several at once);
- Stitching thread of a suitable shade (strong, but thin);
- Fabric base (felt or artificial leather are handy);
- Colorless glue (for cutting and fixing on the fabric-base).
Costume jewelry made of textiles
Perhaps the most inexpensive way to get a new accessory. When it arose, it is difficult to say, but certainly a long time ago. Perhaps the first representative of this trend was a kerchief, coquettishly draped around the neck of a fashionable woman many years ago. Now it’s a full-fledged handmade trend.
Any housewife is gradually accumulating scraps of textiles, yarn remnants, bits of lace, interesting buttons, and more. For some people it’s just garbage, for the needlewoman it’s all she needs for a masterpiece. Felt beads, furry hair clip, knit strip necklace, lace brooch. for every taste, style and season! A long piece of fabric and a lump of synthetic material left over from sewing can be transformed into a stylish necklace, and trivial English pins and small rags become a vintage bracelet.
Sewing, knitting, weaving, embroidery, carving. everything goes. Despite the unpretentiousness of the raw materials, the imagination of the masters creates admirable designer things.
What you need for this, there is in every home:
Wooden handicrafts decorate the life of man for thousands of years already. Undoubtedly, they were appreciated even by primitive fashionistas. Our ancestors wore amulets made of certain types of wood as amulets, which protected them from evil. Coco Chanel revived her interest in wood when she included such earrings and beads in her collections. And today, thanks to its energy, warmth, natural variety of texture wood décor pleases us. over, carrying positive energy, it serves as a kind of amulet.
Variety is characteristic of such products. Wood is easily carved, and in the hands of the master becomes the embodiment of beauty. The texture of the wood is very beautiful on its own, and therefore the author is usually limited to sanding and clear varnish. But tinting, painting, burning, etc., are also used. The wood is organically combined with other textures, especially with leather, which gives the compositions a special chic.
The manufacture of woodwork requires skill and a variety of tools, depending on the type of processing. Here’s the approximate kit:
- Chisels of various types;
- Carving knives;
- Jigsaws, saws;
- Hand drill;
- A sanding fixture (felt wheel);
- For measuring: tape measure, compass, plummet;
- Wax, paint, etc.п.;
- Connecting and finishing components.
Traditionally, wood parts are created by hand, but a number of auxiliary mechanisms, machines can be purchased.
A wire design in the manner of wire wrap
Jewelry-making with wire (Wire Wrap). In the history of mankind they appeared, of course, later than the wooden ones, but already the ancient Celts and Vikings were familiar with this technique. All connection fittings are made of it. But it can be more than just an auxiliary component. Rings, necklaces, earrings. the design allows you to create any set.
Metal lace captures with its elegance, and combining it with other materials makes wire tracery a design masterpiece. Braided stones look very spectacular. Expensive jewelry pieces with gold and silver trimmings become the epitome of elegance and refinement.
This technology requires certain skills: one should know how to solder, and master blackening and patination. To work, purchase:
- Wire (copper, brass, etc.).);
- Pins of various diameters (for screwing);
- Hammer and anvil (for flattening);
- Wig Jig. a device for bending.
How to make friends with your muse
If you want your work to attract customers, you have to constantly develop and improve. Even the most successful developments should not be put on stream. Inspiration does not come by order, but you can constantly look for sources for your imagination.
Visit various art exhibitions, look through albums of paintings, follow fashion trends, admire nature. Accumulate impressions, emotions, visual images, whether it is a cloud, an unusual clothing of a casual fellow traveler, a beautiful picture from the Internet.
Always be interested in the experience of your colleagues (or competitors). Of course, copying other people’s collections is inadmissible, especially because on the Internet you can’t hide plagiarism, and your reputation will be ruined. But other people’s developments are a great source of inspiration. Perhaps someone else’s idea will give you an idea for a completely creative solution.
Very interesting results gives a combination of several techniques. this fantasy solution can be used to overcome the creative crisis. Do not allow yourself to stop, constantly looking for exclusive ideas for your creativity. and it will give joy to you and others.
Profitability of the business
If you decide to turn your hobby into a profitable enterprise, think carefully about the economic aspect. Fine crafts are always in demand, your task is to make your model competitive in cost and quality. Calculate the profitability of your business. Usually this business does not require a solid initial capital. Start with the place of work: of course, renting a separate room is not required, but without a rationally equipped workplace does not do.
If you need working tools, buy a minimal set first. And then, already with the profits, buy the extravagances. If you can, it’s better to buy both tools and consumables in sets. Such sets are often available in the trade and are cheaper. Before you buy carefully study the market, compare prices, visit forums. Given the multitude of manufacturers, it is not easy to make the best choice.
Consult with experienced colleagues.
Look for opportunities to save money. Consider options for cooperation with other craftsmen, such as manufacturers of custom, attractive customer packaging for your goods. This way it’s more advantageous to order fittings in bulk and not to search for them in retail outlets.
Use the resources of our online store. Generally items in them are considerably cheaper than those you can find offline. It’s easy to see, if you have a look at the catalog.
But one rule is the same for everyone. your models should be unique, attract attention, be stylish and unconventional. Only in this way you will find your client.
Lessons for beginners. Assembling Costume Jewelry
Today I bring to your attention a lesson for beginners, dedicated to such a theme as the assembly of jewelry. This article will be useful first of all for beginners, we will tell you about the tools and techniques for costume jewelry’s assembling.
To begin with, let’s look at examples of how to connect the lock and the jewelry rope
Zhanna Vadimovna Vasilyeva
Today I would like to offer you some lessons for beginners on how to assemble costume jewelry. This article will be useful first of all to beginners, we will tell about the methods and tools that are useful to assemble the costume jewelry.
To begin, let’s look at examples of joining a lock and jewelry wire (fishing line, wire, cord) from the blog making-beaded-jewelry.com. Cut the necessary amount of jewelry wire. Cut with a margin of two to three centimeters on both sides.
Bend the wire in the place where you will fasten the lock.
Pull the second piece of rope through the krimp.
Pull it closer to the lock, but not too close. If you fasten the crimp against the lock, your jewelry piece (a bracelet for example) will bend sideways.
Take a crimper and place the crimp in the notch groove.
Move the crimp, already clamped, into the round groove. Click again.
If you don’t have a crimper, use pliers to clamp the crimp. Now put the masking bead on the crimp and squeeze it.
In principle you can do without crimper, the main thing is to fit the clamped crimp into the masking bead.
Now let’s try to make a wire crimp with our own hands according to the lesson from the blog http://boojewels.blogspot.ru
First wrap the wire around the crimp, then use round pliers to make a double loop of wire.
Now let’s see how to make a macramé bracelet with a sliding clasp. You need to have some initial skills in macramé, but if you don’t have any. learn from the pictures.
Fold the ends of the embellishment parallel to each other, then take a section of the same cord. Using this diagram, weave a flat knot. Periodically pull the ends of the cord toward you to make sure the knot is tight. Then, pull the ends of the cord into opposite ends and secure them.
Here is another idea for a jewelry clasp. use buttons. To do this, at the very beginning of your work, make a loop of cord at one end that is slightly larger than the button. At the end of the work on the other end of the ornament attach a button. The button loop can also be made in different ways. You can braid a loop with cord or thread, or you can weave macramé.
If you’re using endlets in your work, see how you can fasten them. You will need duct tape and glue for seconds.