STIHL fs 38 how to change the line

Factory parameters of the model

STIHL gasoline mower in this configuration stands out with its solid factory settings.

Technical characteristics of the grass trimmer include:

  • Standard engine cylinder volume. 27,2 cm3;
  • capacity of standard engine. 0,9 l;. capacity of standard engine cylinder. 27,2 cm3;. capacity of standard engine. 0,9 l. с.;
  • The capacity of the tank for filling the fuel mixture. 330 ml;
  • Fuel consumption at high loads. 320 ml/h;
  • The maximum possible mowing diameter when using a fishing line. 38 cm;
  • Cutting diameter with the metal blade is 25.5 cm;
  • Maximum sound pressure when working with a metal blade. 109 dB.

The STIHL FS 38 grass trimmer is small and lightweight. It has an empty weight of 4,1 kg and a length of 147 cm without cutting equipment.

STIHL fs 38 Lawnmower. How to refill the cutting line

STIHL produces a variety of cutting tools with both gasoline and electric engines: chainsaws and chainsaws for special purposes, brushcutters, electronic grass trimmers, brush cutters, lawn mowers, and of course drilling tools, washers, sprayers and other equipment. The company was founded in Germany and is represented in over 160 countries.

STIHL lawn mower you will love the different capacities and purposes: from a lightweight trimmer for lawn trimming to a large, massive professional tool. Here are a few of our favorite STIHL ride-on models.

The lightweight STIHL fs 38 ride-on mower is the right choice for lawn care and small spaces.

  • power. 0,9 l. с.,
  • motor volume. 27,2.7 cube. see,
  • two-stroke engine,
  • weight. 4,1 kg,
  • tank size. 0,33 l,
  • working part. AutoCut C5-2 head,
  • Cleaning width. 255 mm,
  • easy start system,
  • primer.

The boom is curved, and there is also a D-shaped handle that is simply adjustable and set in a sensible position. Comes with goggles.

STIHL fs 55 lawn mower is well suited for domestic tasks in the suburban area: mowing grass around trees, trimming lawns, snowball fight with weeds. It can mow old tough grass, nettles, rushes, thin bushes.

  • STIHL FS 55 power. 1 litre.с.
  • engine capacity. 27,4.5 cc. cm,
  • two-stroke engine,
  • 5 kg weight,
  • tank size. 0,33 l,
  • Working parts. blade, line,
  • Working width. 420 mm for the fishing line and 255 for the blade,
  • primer that pumps fuel into carburetor for quick start after idle time.

How to correctly change the line on your trimmer

Included belt on two shoulders, goggles to protect the operator’s eyes. The boom is flat, handle is bicycle and adjustable with a screw.

The STIHL FS 130 is equipped with a 1.9 HP STIHL 4-MIX engine with a displacement of 36.3 cm, which can of course be filled with petrol and oil, just like two-stroke engines. Such engine emits less pollutants into the atmosphere than a two-stroke, but with a low noise level. Low-maintenance air filter with cardboard filter element for long life.

Weight of the machine is 5.9 kg, mowing is carried out by the line otherwise speaking of a knife. Mowing width with blade 23 cm, width of line 41 cm. The STIHL FS 130 mower has a straight bar and a bike handle that can be simply swivelled for storage and height adjustment, for this purpose you need to unscrew the central screw. It comes with a double shoulder strap and goggles to protect the eyes.

STIHL fs 250 is a powerful professional class mower. for cutting dry grass, stubborn grass, large brush stems, brush and small trees.

  • Power. 1,6 kW
  • Engine displacement. 40.3.2 cube. see,
  • 2-stroke motor,
  • weight. 6,3 kg,
  • tank size. 0.64 l,
  • tool. blade that cuts grass up to 255 mm, there is an option to install the head with 2.7 strings,
  • Elastostart system for easy starting,
  • Fuel primer enables the lawnmower to be started quickly and easily even after a long period of standstill.

STIHL FS-38

Includes shoulder strap and goggles to protect the eyes, detachable bike handle that can be rotated parallel to the boom for storage, the boom flat. Handle height adjustment is done without tools, just unscrew the screw. The operating elements are still close at hand on the handlebars.

As the main advantage of gasoline mower STIHL FS 250 users say the higher power and its ability to mow almost anything. From the disadvantages are named awkward lug suspension, high consumption of line and a strong vibration.

stihl, change, line

The STIHL FR 131 T cordless petrol grass mower is the specialist for inaccessible areas and rugged terrain. Shoulder strap simplifies the carrying of the device, in particular a long, and greatly simplifies the work, because the tool itself is quite heavy. 9.6 kg.

  • 4-stroke 4-MIX engine,
  • power. 1,4 kW
  • motor volume. 36,3 cm3,
  • fuel tank. 0,71 l,
  • cutting element. metal blade with a cross section of 230 mm,
  • primer of course,
  • Easy start system ErgoStart,
  • cardboard filter,
  • automatic decompression system,
  • anti-vibration system,
  • radial handle allows you to mow in tight and inaccessible places.
  • The STIHL FR 131 T fits neatly into its carrying bag due to the removable mower bar.
stihl, change, line

STIHL also produces electronic and cordless grasshopper mowers, accessories and cutting tools.

See also  Replacing the brushes in the Bosch voltage regulator

How to refill a STIHL FS38 Auto Cut 11-2

Moths entice their own mobility. they are independent of the outlet, they are taken independently even where there is no electricity, although this type also has its own difficulties deficiencies. STIHL makes it really easy to find the right model for any application.

Pros and cons of the model:

Naturally, the list of positives should include the veracity of the brand.

  • The fuel level has to be checked all the time;
  • A small motoresource;
  • Low power requirement;
  • Expensive;
  • meager equipment.

The presence of not particularly disastrous disadvantages of the model does not have a negative impact on the popularity of the unit, because the perfect technique simply does not exist.

Grass trimmer technical features

In addition to good build quality, the STIHL FS 38 lawnmower convinces with decent factory settings.

The list of the most important features of the garden tool includes:

  • The power of the factory engine. 0.9 l. с. at 9500 rpm;
  • fuel tank. 330 ml;
  • maximum fuel consumption. 320 ml/h;
  • Coverage when mowing with a line/knife. 38/25.5 cm;
  • The sound impact on the operator is 97 dB;
  • weight of 4.2 kg.

STIHL grass trimmer differs from its analogues by its modest dimensions. The length of the brushcutter is 147 cm with the cutting attachment disassembled.

STIHL FS 38 manual

Russian © ANDREAS STIHL AG Co. KG, 2011 0458-234-1821-A. VA2.J11.CAP 0000000614_005_RUS Printed on chlorine-free bleached paper. Printing inks contain vegetable oils; paper is recyclable. Original instruction manual To these instructions

Russian To this instruction manual Symbols in pictures All symbols in pictures on the unit are explained in this instruction manual. Depending on device and equipment, the following pictograms and symbols may appear on the machine. Fuel tank; fuel tank

Russian Minors are not allowed to use the machine. with the exception of trainees over the age of 16, who are supervised. Keep children, animals and bystanders away from the machine when it is in operation. When not in use, the unit should be set aside so that it does not disturb anyone.

Russian Wear sturdy shoes with non-slip soles. Wear a face shield and always wear safety glasses. risk of injury from objects being swirled or thrown sideways. The face shield is not sufficient protection for the eyes. Wear personal hearing protection. as,

Before starting up. Check protective equipment (e.g. blade guard) for damage or wear. Replace damaged parts. never operate the device with a damaged protector. Only one person is operating the pump-motor unit. no-one is allowed in the working area

Russian 002BA056 KN Check that the engine is idling freely and that the cutting attachment does not rotate again after releasing the throttle trigger. Left hand on the crank handle and right hand on the piston rod handle. also valid for left handers. When operating the machine in a hazardous environment

Russian Do not smoke when using the machine or near a running machine. risk of fire! Combustible petrol fumes may escape from the fuel system. The dusts, vapor and smoke produced during operation can be extremely harmful to health. If there is a lot of dust or smoke

When using mowing heads Use only mowing heads with a properly mounted blade so the mowing lines are cut to the approved length. To regulate the mowing line manually the engine must be stopped when adjusting the mowing head. otherwise there is a risk of injury

STIHL recommends the use of STIHL spark plugs. see “STIHL recommends the use of spark plugs” on page 54.”Technical data”. Symbols on the safety equipment Never substitute steel wire for the mowing line. risk of injury! Check the ignition cable (perfect insulation, tight connection).

STIHL PolyCut 6-3 002BA073 KN 1 Cutting head with plastic blades If one of the wear marks is not adhered to, there is a risk of the cutting attachment breaking off and parts being thrown around and causing injury. To reduce the risk of accidents

Approved combinations of cutting attachment, deflector, handle and harness E IN /L ur hn Sc Sc hn ur /L E IN 1 1 2 Cutting attachment Deflector 2 Handle 5 6 4 7 234BA014 KN 3 Wear belt Permissible combinations Deflector Choose the correct combination from the table, in

Russian Set the circular handle in the most favourable position Mounting the circular handle 1 Loosen the bolt (5) N Replace the circular handle on the shank, if necessary N Tighten the bolt (5) 2 1 232BA066 KN 5 N Installing the safety devices 50 mm (2″) N 2 4 N Install the circular handle (1) on the shank

See also  Compressor air dryer how it works

Russian Clamping plate Mounting the cutting tool Mounting the mowing head Carefully keep the leaflet with the technical data of the mowing head! 1 STIHL AutoCut 5-2 3 2 4 N Start the brushcutter so the handle and engine cover point down and the shaft is pointing up

Russian STIHL PolyCut 6-3 STIHL AutoCut C 5-2 8 10 2 2 11 S ch nu r/L E IN 7 9 S 2 nu ch E IN r/L 5 1 5 N Place the upper part (2) on the shaft (5) with the inner hexagon (7) on the hexagon (6) Place the cap (8) on the upper part. screw clockwise onto the shaft and tighten until

STIHL FixCut 5-2 shaft lock Russian N Remove STIHL AutoCut 5-2 mower head N Hold the reel housing N Turn the cap counterclockwise STIHL PolyCut 4 3 N Place the clamping plate (2) on the shaft N Place the mower head on the clamping plate (2) The shoulder (arrow) must engage in the

To set the stringline manually, always stop the engine. otherwise there is a risk of injury! STIHL AutoCut 1 Rotating mowing head held parallel over overgrown terrain. touch ground with mowing head. mowing line

Russian Gasoline Use only branded gasoline with a minimum octane rating of 90 ROZ. containing or not containing tetraethyl lead. Units with a catalytic converter for exhaust aftertreatment may only be operated with gasoline that does not contain tetraethyl lead. water cooled with

You can check your fuel consumption at regular intervals by opening the fuel filler cap on the top of the fuel filler cap. Company

Set the lever (8) of the starter 232TI013 KN 232BA011 KN 8 N Place the machine in a stable position on the ground: the support on the motor and the cutting guard form a support. The cutting attachment may not touch the ground or any object N

After the first ignition of the machine If the motor does not start Ignition lever 232TI015 KN 8 N N Set the ignition lever (8) to e at the latest after the fifth ignition If the ignition lever has not been set to e after the first ignition of the machine, the ignition lever must be set to a position after the fifth ignition of the machine

Before starting up the unit for the first time, make sure that it is placed away from any source of ignition. In the event of a longer interruption of operation. see. Refer to “Storing the unit” section. Cleaning the air filter If the motor power decreases noticeably Do not operate a brand new machine (straight from the factory) with

N Inspect the air filter. Change filter element if necessary N Inspect the spark arrester (depending on country). see (2). “Checked and serviced by a specialist dealer” This adjustment is set so that at all

Russian standard adjustment. FS 38 2MIX N N H L 233BA051 KN Motor stop N Installing mowing head N Check air filter. Change filter element if necessary Check spark arrester (available depending on country). see “Installing spark arrester. “Check and

Russian N Turn the idle speed adjusting bolt (L) anticlockwise until the engine is running evenly. max. to stop Uneven idling speed Adjust idle speed to highly enriched mixture: N If not enough power is available

Russian 000BA045 KN 1 For spark plugs with separate connection nut (1), always screw the connection nut back onto the thread and tighten it firmly. risk of fire due to flying sparks! Installing the spark plug N Screw in the spark plug and press the spark plug connector firmly

Russian Assembly of the mowing head Renewing the mowing line 1 STIHL AutoCut C 5-2 Before replacing the mowing line (hereinafter referred to as the line) always check the mowing head for wear. 4 2 2 3 n ch S /L ur If there are heavy signs of wear, replace the mower head assembly.

Russian Wrap coil frame r nu ch S IN /L E 2 Replace individual parts of the mowing head or the complete mowing head if any signs of wear are found. 3 Motor preparation Schnur/LINE 1 1 Schnur/LINE 2 E IN /L r nu ch S 2 Motor stop N Motor preparation lay down

As an alternative to using separate strings, already wrapped coil strings (special accessories) can be used. 2 5 6 3 5 7 4 681BA009 KN N N Use 2.0 mm strings (green) Cut from spare spool (special accessories

STIHL recommends that maintenance and repair work be carried out only by authorized STIHL dealers. Fuel suction head in tank N suction head in

Russian Device assembly Visual inspection (condition, tightness) X Cleaning Control knob Air filter Suction head in fuel tank Check operation X X X X X Replacement X Replacement by a specialist dealer1) Carburetor Check idle speed mode,

Available bolts and nuts (except for adjusting bolts) 1) 2) Replacement If necessary If defective Once a year Monthly X X X X X X X Replacement Checking for loose fit Warning labels After every filling of the tank Retightening Visual inspection

Russian Minimize wear and tear and avoid damage by following the specified values in these operating instructions to avoid premature wear and tear and damage to the unit. The machine must be operated, serviced and stored with the utmost care,

See also  I can't start the STIHL 180 what to do

Russian important accessories 1 2 3 4 1.8 6 3 2 5 6 7 8 9 10 11 12 7 4 9 5 13 14 15 14 19 12 15 17 16 234BA005 KN 18 FS 38 16 17 18 19 11 Handle Sleeve Stop switch Stop lever Fuel control lever Start lever Cover

Russian Technical data Engine Single-cylinder two-stroke engine FS 38 displacement: Cylinder bore: Stroke: ISO 8893 performance: 27.2 cc 34 mm 30 mm 0.65 kW (0.9 l.с.) at 7000 1/min Engine rpm idle speed: 2800 1/min

Russian FS 38 2-MIX Sound pressure level Lpeq to ISO 22868 Special accessories. Safety goggles. Suspension strap. Combination wrench. Angle screwdriver 1 2 3 4. Carburetor screwdriver. STIHL ElastoStart (starter cord with handle) Cutting tools 91 dB

Russian Users of this machine are only allowed to perform the maintenance and servicing described in these operating instructions. Other types of repair work can only be performed by specialized dealers. STIHL recommends

Russian 000BA025 LÄ Quality certificate All STIHL products meet the highest quality standards. STIHL has received third-party certification that all STIHL products, from product development to material procurement, are,

Automatic line winding

There is a type of spool, in which an automatic mechanism takes care of winding without helping others. the user only has to tuck the line in correctly. How to tuck the line into the grass trimmer reel? Video tutorial. How to remove spool from grass trimmer? How to wind the line in to wind the line. The line is fed through the hole on the inside of the housing, its tendrils are fed through the hole on the outside of the housing, the bobbin is assembled, and when the winding button is turned the line is wound inside without assistance. With such a bobbin, it is unrealistic to wind incorrectly: the mechanism itself will determine the correct direction, as it can spin only in one direction.

Warranty exhaustion of the factory weed trimmer filling will inevitably require replacement of the line. Having a very rough idea of how to tuck the fishing line into the grass trimmer spool itself, beginners are reluctant to take on this task. However, with some skills mastering this simple science does not represent any difficulties, and the following similar instruction will facilitate this process as much as possible.

stihl, change, line

What kind of fishing line to choose in order to refuel your lawnmower

The thickness of polyethylene thread depends on the model of equipment and varies from 1.2 to 4 mm. It can be:

  • with a round section. it is the most durable material for mowing grassy plants;
  • with a shaped section. used for mowing soft plants;
  • Twisted. used for thin grass;
  • Professional type, not suitable for all models.

To change the line on the lawnmower, you need to buy a cutting thread that will be ideal for a particular type of mower.

Selection Criteria

To increase elasticity and stability, let the floss soak in a bowl of water for a few minutes.

Suggestions for use

You need to take temporary breaks in your work. This is to prevent the machine’s engine from overheating and malfunctioning prematurely. For amateur models there is a break every 20 minutes for the same amount of time. For professional mowers, work must be interrupted every 50 minutes, in which case the idle time should be at least 10 minutes.

Mind the condition of the fuel tank. If you do not plan to use the mower for a certain amount of time, it is better to drain the remaining fuel from the tank compartment. This helps avoid breakage of the engine parts.

Rules of Usage

About STIHL

The history of this German brand begins in 1926. In its early days the company was engaged in the production and sale of various components for washing and steam engines. Like many companies, STIHL began with small production runs and a narrow focus, allowing the company to concentrate on quality.

In the early ’30s, the first STIHL chainsaw was launched, which already at that time was distinguished by its convenience and functionality. The company develops at a fast pace, constantly introducing new tools, which gives it the opportunity to enter the international market. In 1931, the first regular Russian deliveries were already underway.

The company now operates in over 160 countries and has opened production facilities in Switzerland, China and many other countries. It is quite understandable, because the range of the company is impressive: power drills, gasoline sprayers, mowers, gasoline grass trimmers, chain saws and much more. I would like to note that Shtil chain saws are very popular because of their functionality and affordable price.

Related Posts

| Denial of responsibility | Contacts |RSS