STIHL 130 valve adjustment. STIHL fs 130 does not start STIHL lawnmower defect diagnosis, disassembly and repair

STIHL 130 valve adjustment

Thanks for the channel! I love my bare hands what is something disassembled Very informative infa!

WITH YOUR OWN HANDS 1

I’ve been doing service on power tools for 10 years, and in my opinion there’s nothing better than a 130m Stihl.

Usolekvest Valhikov 2

Hey, as always, clear and to the point! Way to go ! There’s also a recoil compressor. I’ve seen many great grass mowers, I’ve got a 130, it’s a workhorse.

max ivanov

You are a beauty, he explained everything clearly and to the point, without unnecessary gestures and useless chatter

Alexander Zamuraev 2

Hi Sergei.Thanks for the video, I will check on my fs.130 before the season for sure.Bye, good luck.

Sergey Monakov 3

Want a review of the carburetor adjustment of these mowers

Anton Grishin

Hello) please advise on how to change the oil on these mowers? How many hours does it need to be replaced? At “running in” and normal mode.?

Ruslan Pencrat

All in the business clearly and accurately, thank you very much for your work))

Bin Ladan

Sergey Ketov

Naimboy Aminov

Hi Sergey, thanks for the important information you. You about STIHL br 500 blower what kind of review is filmed

Dimka MECHANIK

Shai hAl

Afternoon. FS 90 grass mower. The valve guide sleeve is out, the washer burst. Is it curable? ? Or change the entire cylinder ?

Pavel Kobylitsky

Hi! I accidentally came across your channel and watched the whole video in the same breath. I own a 131 mower and a 180 saw. Got a lot of useful information. I also liked that everything was clear and to the point, without any unnecessary water”. Definitely subscribe! The question is why did you stop shooting? If I’m not mistaken, the last video a year ago. good luck!✋

Sergey Monakov 1

How many times can I adjust the valves??

Sergey 178

I’ve been yanking with three hands like a rope till now 🙂 2006 grasshopper, already mowed half the planet. Did not adjust anything. Now I will.

Alexey Mihajlovich V

I have a 100 STIHL grass mower overflows and wanted to know what the clearance on the spool

A Sybyrov

I’ve been doing it since 2004 and it’s been acting up since last year. I haven’t adjusted the valves even once. I just found out last year that it turns out I have a 4-stroke. Something to do now. It’s good that you don’t have to mow too much. I used to cook about 25-35t over the summer. I had 18 head of cattle. All the time except for last year has never failed.

Replacing crankshaft bearings how, by purchasing a new crankshaft?

STIHL fs130 valves adjustment

In this video I will show you how to replace the cam disc and how to adjust the valves

Buy a STIHL brushcutter in St. Petersburg

When you work on landscapes with trees, bushes and buildings, a STIHL ride-on mower gives you comfort and peace of mind. Even the inexpensive STIHL FS 38 weed trimmer handles young growth easily and cleverly around building corners, tree trunks, rocks and bushes. A steep grade is also no problem for this simple, but very effective model. But if you often see perennial weeds mixed in with small but dense scrub, bigger power is better.

Before you buy a STIHL mower in St. Petersburg you need to assess the range of tasks that will purchase the equipment. Small areas are usually trimmed by hand. If you plan to do a lot of work, you’ll need a STIHL FS mower with extra power. The type of blade is also an important factor. It is the steel blade with an increased number of teeth that can instantly cut down young growth and large shrubs.

The first thing to do is to check the fuel

Do not understand why the lawnmower does not start, then first make sure that there is fuel in the tank. Often beginners forget that it is necessary to pause periodically to refill the tool with gasoline and oil mixture. If the tank is empty, of course the lawnmower will not start, no matter how much you try to do this.

If there is fuel in the tank but you can’t get the tool’s engine running then don’t take the time to disassemble the carburettor. Make sure that the grass trimmer engine is started correctly, as indicated in the manual. If you start according to the instructions, then it’s important to take the following points into account:

  • Do not just use high quality gasoline with the highest octane rating, but exactly the brand recommended by the manufacturer. And not always this brand is gasoline AI-95. If you do not know what gasoline to use for the lawnmower, then choose AI-92
  • Oil must be special. for two-stroke engines. If the lawnmower has a four-stroke motor, it must be filled with pure gasoline without mixing it with oil. On the quality of oil for the grass trimmer engine should not be economized, as well as on gasoline. After all, the quality of the fuel used depends on the operational life of the engine
  • Proper preparation of the fuel mixture in the gasoline trimmer. Observations show that most mowers only initially control the process of preparing oil with gasoline for grass trimmer. The more experience the mower has, the less attention is paid to the process of mixing gasoline and oil for a two-stroke engine. The petrol/oil ratio must be the manufacturer’s recommendation. Usually, the ratio is 25 to 1, that is, 1 liter of gasoline needs 40 ml of two-stroke oil (engine oil for cars and the more waste can not be used)
  • Proper storage of fuel mixture. It often happens that after the fuel mixture is prepared, it stands for a long time more than 2 weeks. the ready mix of petrol and oil must not be stored for a long time, since it causes the oil to precipitate, and thus the properties of both oil products are lost. Even careful stirring after a long period of storage of the ready mixture is not a reason for its further use. That is why it is not recommended to prepare more than 2 liters of mixture at a time
See also  How much fishing line is needed for the grass trimmer?

Make sure that all of the above points are met, and only then you can proceed to check the condition of the spark plug. Grass trimmer does not start for a variety of reasons, and most of them can be identified by yourself. It is simply irrational to resort to disassembling the carburetor if it is impossible to start the engine. The next step on the way to finding a malfunction is to check the condition of the spark plug.

This is interesting!If you store diluted gasoline with oil for a long time, these elements decompose into heavy fractions. These fractions clog not only the instrument fuel filter, but also the carburettor channels. Maximal period of fuel storage is no more than 14 days.

ZIL 130, ZIL 131, GAZ 3307, GAZ 3102, GAZ 3110, GAZ 53, MAZ 500, T 25, T40, Izh Planet, Izh Yupiter

Checking and adjusting the clearances in the engine valves is necessary in case of knocking in the valves. Before adjusting the clearances, you must remove the high-voltage wires by disconnecting them from the spark plugs, unscrew the nuts fixing the cylinder head caps, and remove the caps with gaskets. Gaps between the valves and rocker arms regulate the engine on a cold temperature setting screw with locknut installed on the short arm rocker.

First do the following to adjust the clearances. Set first cylinder piston in. м. т. (compression stroke) with the help of setting toothed pointer To do this, turn the crankshaft until the mark on the crankshaft pulley coincides with the TDC mark on the pointer. In this case, both valves, inlet and outlet, the first cylinder will be closed, and between the valve stem and the pushing end of the rocker arm formed the largest gap, which is measured with a feeler gauge and, if necessary, adjust. To adjust the gap, hold the adjusting screw with a screwdriver (Fig. 2, a), loosen the locknut with a wrench, and then insert a dipstick between the valve stem and the pressure end of the rocker and rotate the screwdriver adjusting screw (Fig. 2, b) set the necessary backlash (compression stroke) using a wrench and a screwdriver. Then, leaving the feeler gauge in the gap, fasten the adjusting screw with a locknut using a wrench and screwdriver (Fig. 2, в). After adjustment, the gap should be 0.25-0.30 mm for intake and exhaust valves, with a 0.25 mm feeler gauge passing freely through the gap, and a 0.30 mm feeler gauge should not pass.

To adjust the valve gap of the other seven cylinders, turn the crankshaft by one-quarter turn with the crank (90°) and readjust by the method above, and then adjust the gap in series, according to the order of cylinders 1-5-4-2-6-3-7-8, which is shown by dashed lines with arrows in Fig. i. 2, г. To accurately verify that the crankshaft one-quarter turn, you must apply the chalk marks on the crankshaft pulley, marking them at an angle of 90 ° at the position of the first cylinder piston in the. м. т. (compression stroke).

With the second method adjust the valves simultaneously for several cylinders. To adjust, proceed as follows. Set the piston of the first cylinder in the. м. т. (compression stroke) using the method above and adjust the clearances: first cylinder intake and exhaust valves, second cylinder exhaust valve, third cylinder intake valve, fourth cylinder exhaust valve, fifth cylinder exhaust valve, seventh cylinder intake valve, eighth cylinder intake valve. Adjust the remaining valve play after turning the crankshaft 360° (full rotation). After adjusting the gap in the valves must be put the valve caps with gaskets in place and fasten them with nuts with flat washers. Start the engine and listen to its operation. The warmed engine should run without knocking valves, “sneezing” in the carburetor and “gunshots” in the muffler.

See also  Choose a lawn mower self-propelled gasoline lawn mower

To prevent grinding of the ball springs, you must, during any disassembly of the engine, passed 70 000 km mileage, disassemble the mechanism for turning the exhaust valve and turn the disc spring balls exhausted side down.

  • Check cylinder head bolt and nut tightening
  • Limit valve adjustment and disassembly
  • Checking compression in the engine cylinders
  • Distributor disassembly and assembly
  • Saddles

STIHL fs 130 repair with your own hands

STIHL fs 130 repair by hand from the master for olenord.com.

You must be a user to leave a comment

Register for an account. It’s just!

Worked 3 seasons. plot of 30 acres. Stored with exhausted gasoline in a cold shed. Adjusted the valves in the steel shop a year ago. Seychs started fine, but it won’t go to full power. When fully clutchedWith the first one, the

It is human nature to beautify the place in which he spends the lion’s share of his own time. Residents of cities resort to the services of designers, or try to change something in their own house, buy new furniture, wallpaper, that, coming home after a hard day, you could mentally relax in a comfortable environment.

Residents of their own homes outside the city limits have very different concerns and demands. It is necessary in time to mow bushes, grass, different dead wood, to watch closely for the state of the garden and yard.

It is clear that this requires somewhat different means of comfort. It is here that the next brainchild of STIHL brushcutter comes into the picture. the STIHL brushcutter.

The history of this German brand begins in 1926. In the early days of the company’s development, it manufactured and sold various appliances for washing and steam machines. Like many companies, everything began with small production and narrow focus, allowing us to concentrate on quality.

In the early thirties, the first STIHL chainsaw was launched, already at that time distinguished by its convenience and functionality. The company is developing at a rapid pace, introducing new products on a daily basis, which enables it to penetrate the international market. In 1931, the first continuous shipment of the machines to Russia was organized.

At present the company has expanded its activity to more than 160 countries of the world, opening new centers and production departments in Switzerland, China and many other countries. This is completely understandable, because the range of office is impressive: power drills, gasoline sprinklers, mowers, gasoline grass trimmers, chainsaws and almost everything else. It should be noted that Shtil chain saws are very popular because of their functionality and affordable price.

The STIHL mowers deserve a special mention. they are powerful, robust and easy to operate. Specialists of the company was created many varieties of scythes, with different features and applications.

For example, the range of lawnmowers is designed for mowing grass over large areas. For this purpose, a self-propelled wheel system has been developed, with the help of which it has become possible to care for a large area without spending a lot of time and effort. For decorating bushes, giving them a certain artistic image and texture, perfectly suited lawnmower. STIHL STIHL Grass Saw 180 with carburetor setting and gasoline grass trimmer. And if you need a lawnmower for tall grass and uneven areas, follow this link and get complete information on selecting this type of equipment.

If you want a more delicate approach to trimming grass, such as around flowerbeds or between trees, then the petrol grass trimmer is the perfect tool for precision and accuracy. Specialists of the company have foreseen all nuances and probable difficulties when working with scythes, so they equipped them with nylon strings, which prevent mechanical damage to trees.

Also, a special AutoCut trimmer head is used, which ensures the normal functionality of the string blades of the gasoline trimmer. The for gasoline hand lawn mowers trimmers for grass will tell you this article, as well as it will help you make the right purchase, which you will not regret.

There are two types of these mowers: amateur and professional models, designed to solve problems of a certain complexity. The first category includes FS 38, FS 45, FS 55 and others. Features and differences of these tools are in the power of the motor (from 0.9 to 1.2 l.с. and the tank volume (approx. 0.34 litres).

Professional trimmers include the STIHL FS 130 and FS 250. Let’s look at several examples of mowers, including FS 38, FS 70 and FS 130.

Take a look at the features in the video.

The model is characterized above all by its simplicity and compactness, which is quite sufficient for the proper care of the yard. Main control keys are located on the handle of the device, which significantly simplifies and speeds up the work.

The price of STIHL FS 38 mower is about 130.

  • engine power. 0,9 l.с;
  • The engine volume is 27.2 cc;
  • tank volume. 0,33 l;
  • engine type. two-stroke;
  • bar. straight;
  • The handle is a D-shaped handle;
  • equipment. 2-tooth grass trimmer blade, goggles for protection, belt;
  • weight. 4,1 kg.
See also  What bobbin to choose for your lawnmower. Reviews about the coil Bosch k101

STIHL fs 130 repair with my own hands

info: STIHL fs 130 repair with your own hands by a real craftsman for olenord.com.

You must be logged in to post a comment

Sign up for an account. It’s easy!

Worked 3 seasons. a plot of 30 acres. Stored with exhausted gasoline in a cold shed. Had the valves adjusted at a stiltshop a year ago. Seychs normally starts, but does not go to full power. When fully clampedWhen first clamped

It is human nature to beautify the place where one spends the lion’s share of one’s time. Residents of cities resort to the services of designers, or try to change something in their own house, buy new furniture, wallpaper, that, coming home after a hard day, you could mentally relax in a comfortable environment.

Residents of their own homes outside the city have completely different concerns and requirements. It is necessary to mow bushes, grass, various dead wood in time, to watch closely the condition of the garden and garden.

Understandably, it required a slightly different means of comfort. And this is where the latest brainchild of STIHL comes into the picture. the STIHL brushcutter.

The history of this German brand begins in 1926. In the early stages of its own development, the company was engaged in the production and sale of various devices for washing and steam engines. Everything began, as in many companies, with small production and narrow focus, which made it possible to focus on the quality of products.

In the early 30s, the first STIHL chainsaw was launched, already at that time very convenient and functional. The company is developing at a great pace, constantly introducing new tools, allowing it to enter the international market. And in 1931 organized the first regular supply of products in Russia.

At present, the company has expanded its activities to more than 160 countries, opening new centers and production departments in Switzerland, China and many other countries. This is fully explainable, because the range of office is impressive: power drills, gasoline sprinklers, mowers, gasoline grass trimmers, chain saws and almost everything else. It should be noted that Shtil chain saws are very popular due to their own functionality and applicable cost.

Special mention should be made of STIHL mowers, which are notable for their multifunctionality, reliability and ease of use. Specialists of the company created many varieties of scythes, with different features and applications.

For example, the range of lawn mowers is designed for mowing grass over large areas. A self-propelled wheeled system was developed for this purpose, making it possible to care for large areas without spending a lot of time and effort. For decorating shrubs, giving them a certain artistic image and texture, perfectly suits the lawnmower. STIHL STIHL Grass Saw 180 with carburetor setting and gasoline grass trimmer. And if you need a lawn mower for tall grass and uneven areas, follow this link and get complete information on the selection of this type of equipment.

If you need a more delicate approach to cleaning grass, such as around flowerbeds or between trees, then this task is perfectly coped with a gasoline trimmer for the grass, designed for accuracy and precision performance. Specialists have provided for all the nuances and probable difficulties when working with mowers, so they have equipped them with nylon strings that prevent mechanical damage to trees.

Also, using a special trimmer head AutoCut, which provides the normal functionality of string knives gasoline trimmer. On the of petrol hand lawn trimmers trimmers for grass tells you this article, as it will help you make the right purchase, which you will not regret.

We distinguish two types of these mowers: amateur and professional models designed for certain complexity. The first category includes models FS 38, FS 45, FS 55, etc. Features and differences of these tools are in the power of the motor (from 0.9 to 1.2 liters).с. depending on the equipment) and the tank volume (about 0.34 l).

The professional trimmers include the STIHL FS 130 and FS 250. Let’s have a look at features and properties of few models, particularly FS 38, FS 70 and FS 130.

Take a look at the machine in the video.

The model is characterized primarily by its simplicity and compactness, which is quite enough for the proper care of the yard. The main control keys are located on the handle of the device, which greatly facilitates and speeds up the work.

The STIHL FS 38 mower is priced at about 130.

  • engine power. 0,9 l.с;
  • The engine volume is 27.2 cm3;
  • tank capacity. 0,33 l;
  • engine type. two-stroke;
  • The boom. straight;
  • handle. D-shaped;
  • Accessories. 2-tooth grass trimmer blade, goggles for protection, belt;
  • weight. 4,1 kg.
stihl, valve, adjustment, does

Related Posts

| Denial of responsibility | Contacts |RSS