Roof snow removal tool

When choosing a good mover, consider types of inventory and priority features.

The mover is a type of tool, which is the optimal width of a shovel with a U-shaped handle. The tool can be used to move the snow, which is very effective for cleaning large areas.

Among the variety of slides, the following types are distinguished.

  • Standard pattern. Snow removal is done by pushing the tool.
  • With an auger. The design is equipped with fins-rollers, which while rotating throw the snow away to the sides.
  • On wheels. The design has wheels (one or two), which reduces the user’s effort during snow removal.

Selection criteria

When selecting a snow plow engine, key criteria should be considered.

  • The size of the blade. The width and length of the working blade affect the efficiency of the work. Not everyone will be able to move a wide bucket of snow, so you need to buy a tool based on your physical fitness.
  • Material. Available in plastic, metal and wood. Plastic models are resistant to temperature changes and are not afraid of moisture. Wooden engines require special care. Particular reliability and durability of metal engines.
  • Additional details. Wheels or skids make it easy to maneuver and work. Making snow removal faster and easier.
  • Weight. The low weight of the machine means less effort. The main thing is that the lightness of the product does not decrease the quality of the equipment.
  • Handle. The handle should provide a good grip. Better if it is equipped with an anti-slip liner.

Important value has the quality characteristics, the prestige of the brand, the warranty period and user reviews.

How to use and maintain

When there is a lot of snow, it melts when the temperature changes, creating ice. The weight of such ballast can be impressive (up to 300 kg), which leads to deformation of the roof. But that’s half the trouble: ice blocks are life-threatening, they cause damage to drainpipes, antennas, wires, and other elements of the roof.

To reduce these risks and not spend money on repairs in the spring, the snow from the roof to remove in time.

A shovel can be used for this purpose. In particular, on flat roofs, you can use the same tool as on the site. But if the roof is at a high altitude, you need to use special tools.

On pitched roofs use scrapers scrapers shovels with a special design tray. They do not push the snow forward, but pull it down toward you.

Choose folding models with quick release clips if you often move the tool. Let’s consider each option in detail.

A snow scraper with a band

roof, snow, removal, tool

Scraper for snow removal, shown in the photo, allows for effective removal of snow from the roof, even while standing on the ground.

The principle of operation of this scraper for the roof is fundamentally different from other varieties. With the help of a device, the snow mass is pulled or pushed off the slopes. No physical effort required. Safe for life because the snow moves down the special snow conveyor belt.

A good option is a telescopic scraper. Up to 9 m long when unfolded and 1.5 m long when assembled. Cutting width. 40 cm. The snow rolls down the sheet length of about 4 meters. Parameters may vary depending on the model. The product doesn’t scratch the roof and is easy to move on it thanks to the rollers. But not all models have rollers.

See also  Tool for chamfering metal pipes

A rectangular snow thrower

When choosing snow removal equipment, take into account the width and height of the roof, the material of which it is made. Steel and aluminum models of scrapers are very popular, but for cleaning fragile and delicate coatings made of polycarbonate, glass, tile, use wooden and plastic scrapers. For example, such a pusher made of plastic:

It features a retractable handle made of corrosion-resistant aluminum and magnesium alloy. Also suitable for cleaning narrow walkways. Replaceable scraping nozzle.

The scope of the aluminum scraper is universal: it can wipe snow and leaves from the roof, remove ice and icicles.

Working surface of the scraper is made of durable aluminum alloy. And to prevent the metal from scratching the roof, the edge of the shovel is placed slightly askew and protected by a rubber nipple.

Get rid of snow and ice on the roof: the most effective measures

Our country is located in different climatic zones, where along with frosty winters there are also frequent thaws with snowfalls and subsequent frosts. In such extreme conditions on roofs, icing, icicles and snow deposits of considerable thickness, and hence considerable weight are formed. Uncontrolled falling of large masses of snow and ice is dangerous for people, and the multi-ton accumulation of snow can destroy the rafters. There are methods of controlling the critical thickness of snow on the roof, which helps clear snow and ice from the roof in a timely manner. And also there are modern ways to combat accumulations of winter precipitation on the roofs of buildings.

Mechanism of snow cap formation

The formation of snow caps, icicles and ice on the roofs of buildings occurs gradually during the winter. The speed and intensity of this process depends on the amount of precipitation falling in the winter period, the slope of the roof, as well as the complexity of its design. First, the snow accumulates in the valleys, valleys places of contact of the roof to vertical surfaces. If you neglect the removal of snow and icicles, the following consequences await the homeowner:

  • Falling rafters. If the weight of the snow cap exceeds the carrying capacity of the frame, the rafters or other supporting elements can deform or even collapse.
  • Damage to the roofing material. When ice slips off the roof surface, it damages the roofing material, the cost of which is quite high. Scratches on the metal coating become a focus of corrosion, which reduces its service life.
  • Spontaneous descent of snow or falling icicles. When it is thawing, the snowpack can slide off the slope on its own. Falling icicles and large amounts of snow from a great height can cause serious injury.
  • Collapse of the gutter system. When the snow falls from the surface of the slope, under its weight may collapse gutters.

Important! The maximum snow load is exposed to a roof with a slope of 30 degrees, because the snow from the slopes does not slip and not blown by the wind. There are regulations governing the optimal angle of inclination of the roof, taking into account the average annual precipitation falling in the region.

Countermeasures: How NOT to clear snow from the roof of a private home

If you do not want. or cannot. regularly remove snow drifts from the roof, you can arrange a heated roof covering. These measures are costly, but they reduce the risk of damage to your rafters in heavy snowfall and in fast-changing weather, from freezing to thawing.

Review of the Avalanche Snow Removal System

The heating cable is laid in strips along the bottom edge of the roof, as well as in the gutters and downspouts. The latter measure is mandatory, because otherwise the water flowing down from the roof will freeze in the gutter system, increasing the risk of its failure.

See also  Rivets under a hammer how to rivet.

For roofs with skylights, projections and recesses of various kinds the heating cable is laid on the contour of all projecting or embedded elements of the construction.

In houses with a living (working) attic, this method of combating snow and icing is most useful because it avoids leaks on the roof heated from below.

The optimal option is considered a bunch of electric heating systems in the house, on its surface structures, as well as on the site.

This not only eliminates the problems with “avalanches” coming down from the roof, but also reduces the risk of disruption of water, sewage and other utilities.

  • Aluminum strip;
  • Threaded rod M8;
  • A tarpaulin or thick polyethylene film;
  • Plastic and aluminum tubes 20, 25 mm;
  • castors. 2 pcs.
  • bolts, nuts.

You need to bend a U-shaped billet from an aluminum strip.

The height of its sides should be slightly greater than the normal thickness of the layer of snow that accumulates on the roof. The width of the bracket is made at your discretion, but preferably not less than 50-60 cm.

The edges of the workpiece is drilled for a threaded rod. It is cut with a reserve to exceed the length of the width of the workpiece from the strip. Push the threaded rod through the bracket and put the castors on its edges.

Those are secured with nuts so as to be able to screw through.

A long strip of tarpaulin or polyethylene film is fastened to the stud. Its length must be slightly longer than the slope of the roof to be cleaned.

Then a handle made of a pipe is placed on the billet. It can be made collapsible by connecting a few tubes of different diameters. Fasten the tube to the strip can be a couple of bolts. Be sure that the first tube should be plastic, because it is flexible and will allow the tool to adjust to the desired angle.

Then a rigid metal pipe is attached to it.

To use a tool, you need to go up to the slope of the roof and put it on the edge of the roof. Then roll the device with wheels to the ridge of the roof. Eventually the snow will slide down the tarpaulin strip. It remains to remove it with a shovel if it gets in the way.

Ways of cleaning roofs from snow and ice

Snow removal work on roofs is not particularly complicated and is based on a common method. the movement of snow and ice from the top down. There are some differences in the location of workers.

The mechanical method of clearing snow and ice from roofs

This method consists of simply moving and dumping loose snow and melted ice.

From the ground or a ladder

This option is used for low buildings in the private sector.

The following tools are used in the work:

When using a lean-to ladder it must be firmly secured at an angle of not more than 60º.

At the beginning of the work they knock down icicles with a stick or mallet, then conduct cleaning of the roof.

Standing on the roof surface

Cleaning the roof areas of high-rise buildings by mechanical means must be carried out strictly under the supervision of a specialist.

Tools are selected individually for each type of roofing.

From the cradle of the lifting device

This type of cleaning is performed by a service company or a contractor with special equipment and a permit to work at height.

Such work is similar to any other work at height. washing windows, painting, plastering facades.

Modern technology for clearing roofs of ice and snow

With a high slope of the roof to prevent the growth of ice and the formation of icicles is not uncommon today use the system “anti-ice.

See also  Metal deburring tool

Works automatically according to sensor readings.

Chemical ingredients for cleaning snow and icicles from the roof

The use of chemicals is a passive way to clean snow from the roof. Using a simple composition of salt and sand can avoid the formation of ice build-up. The product is affordable and fairly easy to use.

effective use of chemicals that can melt the ice and snow mass in particularly frosty winters.

The price of snow removal from the roof with the help of chemicals is much higher than when using the salt mixture. However, such compositions are used for almost all types of roofing materials. It is not recommended to use chemicals in the private sector. They are dangerous for animals walking on roofs.

Snowblower for roofs

The fall of large amounts of snow is the cause of serious problems:

Therefore, the question of cleaning roofs from the snow carpet is the most pressing.

The company Modern Technologies offers the most convenient, easy and safe way to use a snowthrower.

The device cuts the snow with a sharp edge, and then the block rolls down the slippery sheet. Ergonomic telescopic handle can be made in 2 versions:

In addition, an additional knife can be installed on the handle of the snow cutter, which cuts through the rolling layer of snow, preventing the possibility of injury to a person while cleaning the roof.

With this device you can remove snow from the roof without overloading the musculoskeletal system, and most importantly. safely !

In addition, additional accessories can be applied to the snowthrower, so that you can use the device to clean windows up to 6 m high.

Using our device, you will save the roof, property and health!

How to properly remove snow from the roof?

So, the easiest way to clear snow from a roof is to climb onto the roof. Many people think this is the most adequate option. What is difficult? Climbed himself on the roof, from there nothing will fall on his head, it is clearly visible where else to clean and in what direction from the roof to dump. But there is an important danger here: there may be ice under the unexpected layer of snow, and it is easy to slip on it.

Not to mention the fact that the wet, caked snow itself is slippery. That’s how and fall from the roof, unfortunately, unless the enterprising comrades do not “catch” snow guards and at least some, but the insurance around the belt.

In order not to damage the roof covering itself, try not to overdo it and do not remove the snow completely. You can safely leave 10-20 cm of snow that will not put any load on the roof.

If you are sure that the snow is loose, light and will not cause major problems, then it makes sense to “trim” it. This is not difficult to pull with a tight rope. So, option one: a rope with a load threw over the roof ridge and, twitching, break the integrity of the snow cap, why everything quickly falls down.

Of the disadvantages, there is a risk that the snow along with itself will tear the gutter system:

And on the roofs of outhouses in general you can do so:

Another risky but popular option is to sit on the roof ridge and push the snow away from you with something long.

Related Posts

| Denial of responsibility | Contacts |RSS