Minitractor from the motor-block Neva with their own hands

The necessary consumables, parts and spares

To understand what is needed to make, let’s look at the main elements of the finished mini-tractor:

  • Frame (made from any rolled metal)
  • A device for making turns
  • Any kind of brakes
  • Seat
  • Metal for the body cladding
  • Coupling, which serves to connect other equipment.

All of these components can be purchased at salvage yards or scrap yards. But their choice should be approached responsibly. Often they are not quite new, so they need to carefully inspect for integrity and defects. After all, you can not allow the use of damaged components. Otherwise the entire device will not work properly.

How to make a minitractor from MTZ motoblock?

To remake the motor blocks of this brand should also take into account their design and capabilities. MTZ machines have a sufficiently high power, which makes it possible to turn them into a full-fledged crawler mini-tractor. It will feature high cross-country ability and excellent traction with the soil, so the quality of plowing in such a machine will be many times higher than in wheeled mini-tractors.

Before you get to work, be sure to study the drawings, in which you will find all the information you need for remodeling.

The procedure for assembling the mini-tractor is as follows:

  • First, put the single-axle tractor into operation with a mower;
  • After that, completely dismantle the front platform of the unit;
  • At the front of the mini-tractor, install the crawler drive;
  • In a recess designed for installation of steering linkage, install the adjusting rod. This element will increase the rigidity of the entire structure;
  • Weld the seat for the driver to the upper part of the frame;
  • Near the engine, make room for the battery and the hydraulic valve.

Such a way of manufacturing will be suitable for modification into small tractors motoblocks MTZ 05, MTZ 09 and MTZ 12. Each of them has enough power to work together with the trailer and attachments at the same time.

Materials and tools

To assemble a mini-tractor on the basis of a power tiller you will need, in addition to the “Neva“:

  • Electric welding machine;
  • Grinder (for rolling and fitting);
  • drill;
  • A set of the necessary simple tools;
  • winch, jack system;

Of the materials necessary for the construction:

  • Dashboard;
  • Suitable in size and strength pair of wheels;
  • Brake system with a hub;
  • Steering system rod;
  • Steering rods;
  • Gearbox;
  • Angles, pipes or profiles;
  • Canopy system;

Conversion kit

The above-mentioned differences somewhat complicate the transformation of power tillers into mini-tractors. A special conversion module comes to the rescue. Using it, you can not look for single parts, do not think about how to make individual elements of the tractor.

Using the KIT kit, you can get three benefits such as:

The special feature of “KIT” is the connection of steering through a worm-type reducer. And also for steering are used steering rods with standard tips.

See also  How to dilute gasoline for a lawn mower

Included is a drum-format braking system, driven by hydraulic fluid. Gas pedal is controlled manually, and the brake/clutch complex is coordinated by pedals. Developers of the conversion module made provisions for the orientation of the gearbox towards the driver, it is placed on the frame.

Attachment and hitch devices are attached by means of a separate attachment. The kit “KIT” includes a mount that allows you to install a lawn mower and shovel (snow blade). And it also includes the front wheels of the Zhiguli.

Other parts to be mentioned are:

  • frame;
  • base for the seat;
  • the seat itself;
  • driver’s protection;
  • backrest;
  • the fenders of the mini-tractor;
  • the levers that lock and unlock one of the half axles;
  • brake cylinder;
  • hydraulic tank;
  • drum and support disc.

Rear axle and auxiliary attachments, as well as front wheels are not included in the “KIT”. As for tools, they are selected individually.

But in any case, the following are needed:

  • hammers;
  • electric drills;
  • keys;
  • welding machine and electrodes to it;
  • angle grinder;
  • fasteners;
  • clamps;
  • angle;
  • drill bits for steel work;
  • metal discs.

Selection of wheels is at your discretion. It is possible to use both automobile wheels and the wheels installed on a similar-format motoblock.

RARE MINI TRACTOR. Can We Fix It?

Of course, additionally purchased devices can significantly increase this amount. Varying the set of auxiliary components, it is possible to change the total cost.

How to make a minitractor from a power tiller MTZ?

To remake the motor blocks of this brand should also take into account their design and capabilities. MTZ units have a fairly high power, which makes it possible to turn them into a full-fledged tracked mini-tractor. It will be characterized by high cross-country ability and excellent traction, so the quality of plowing such a machine will be many times higher than that of wheeled mini-tractors.

Before proceeding to work, be sure to study the drawings, in which you will find all the information you need for the modification.

The procedure for assembling the mini-tractor is as follows:

  • At first, switch the single-axle tractor into operation with the mower;
  • After that, completely dismantle the front platform of the machine;
  • In the front part of the manufactured mini-tractor, install the track drive;
  • In the recess designed for the installation of the steering rod, install the adjusting rod. This element will stiffen the entire structure;
  • Weld the driver’s seat to the top of the frame;
  • Put an area near the engine for the battery and the spool valve.
minitractor, motor-block, neva, their, hands

korea 4×4 mini tractor no.1.abc tractor chassis

Such way of manufacturing is suitable for modification into small tractors MTZ 05, MTZ 09 and MTZ 12. Each of them has enough power to work together with the trailer and attachments at the same time.

A mini-tractor from a power tiller with your own hands. how to make it

Before you begin making a mini-tractor on the basis of a power tiller, you will need to prepare the necessary materials for work. A kit for modification includes:

  • welding machine;
  • screwdrivers and wrenches;
  • An electric drill and a set of various drills;
  • an angle grinder and a set of metal discs;
  • set of nuts and bolts.

Properly assemble a tractor from a motor-block will help appropriate drawings. These will tell you in what order to connect the parts, and what method of attachment is suitable for safe installation.

Modification of the power tiller into a mini-tractor is performed in the following order:

  • A mini-tractor on the basis of a power tiller must necessarily be equipped with a strong reliable frame. It must be able to withstand an extra pair of wheels, plus the load carried in the tractor will be pressed on the supporting structure. To make a strong frame, it is best to use pipes or metal corners. Please note that the heavier the frame, the better the tractor will hit the road, and the better will be the plowing. frame wall thickness does not matter too much. the main thing is that they do not bend under the pressure of the transported cargo. All the parts are then bolted together, and then welded to one another for completion. To make the frame stronger and more reliable, equip it with a cross beam;
  • Immediately after making the frame, it can be equipped with an attachment mechanism through which the small tractor will be equipped with additional attachments. The hitch can be installed either in the front or in the rear part of the supporting structure. If in the future it is planned to use the manufactured mini-tractor with a trailer, a towbar should be welded to the rear part of its frame;
  • In the next step, the self-made machine is equipped with front wheels. For this, it is best to equip the manufactured mini-tractor with two prefabricated hubs with brakes provided on them. Next, it is necessary to attach the wheels themselves. To do this, take a piece of steel pipe of a diameter that fits the front axle. Next, mount the wheel hubs to the tube. Drill a hole in the center of the tube, which is necessary to mount the product to the front of the frame. Then install the steering rods and adjust them in relation to the frame by means of a worm gear. After mounting the gearbox, mount the steering column. The axle at the rear of the tractor being made is mounted through pressed bearing bushes. The wheels used should be no more than 15 inches in diameter. Smaller parts will lead to “burying” the machine’s front end, and larger wheels will significantly impair the maneuverability of the mini-tractor;
  • The next step is to equip the mini-tractor with an engine from a power tiller. It is best to mount the motor at the front of the machine, as this will improve the balance of the machine when operating with a loaded trailer. Arrange a reliable mounting system for the motor. When mounting the motor do not forget that the PTO shaft must be fixed coaxially to the pulley located on the rear axle of the mini-tractor. The force on the wheels should pass through a belt drive. For more details on how to convert a power tiller into a mini-tractor see this video.
See also  How to start a STIHL gasoline lawnmower

The tractor made by your own hands should be equipped with a reliable braking system and a quality hydrovalve, which is necessary for the trouble-free operation of the unit with attachments.

How to make a minitractor from MTZ motoblock?

To convert this brand of motoblocks, you should also take into account their design and capabilities. MTZ units have a sufficiently high power, which makes it possible to make a full-fledged crawler mini-tractor. It will be characterized by high cross-country ability and excellent traction with the soil, so the quality of plowing in such a machine will be many times higher than in wheeled mini-tractors.

Before you start work, be sure to study the drawings, in which you will find all the information you need for the redesign.

The procedure for assembling the mini-tractor is as follows:

  • At first, switch the single-axle tractor to the mower operation mode;
  • After that completely dismantle the front platform of the machine;
  • In the front part of the mini-tractor to be made, install the crawler drive;
  • In the recess designed for mounting the steering linkage, install the adjusting link. This element will increase the rigidity of the entire structure;
  • To the top of the frame, weld a seat for the driver;
  • Next to the motor, arrange the site for the installation of the battery and hydraulic valve.

Such a way of manufacturing is suitable for remaking in small tractors motoblocks MTZ 05, MTZ 09 and MTZ 12. Each of them has enough power to work with a trailer and attachments at the same time.

See also  Lawn mower does not collect grass in the grass catcher box reason

About the mini-tractor from a “Neva” power tiller: how to make with your own hands, remodeling

To work in the garden was enjoyable, well, or was easier, people buy power tillers or mini-tractors. But there are also those who decide to make a mini tractor from the power tiller Neva with their own hands, in order to reduce costs. To turn the Moto-Block into a four-wheeled helper, you can buy an adapter with a seat.

minitractor, motor-block, neva, their, hands

самодельный трактор/передний адаптер/minitractor with your own hands

Making a mini-tractor from the Neva power tiller

First of all, let us note the reason why exactly the classic models of Neva units are so well suited for the conversion of a motor-block into a tractor. The fact is that for such a task you need sufficient power, which all units of this brand have. The process of re-equipment is not so complex and labor-intensive, and if you have a drawing and clear instructions is feasible for almost any owner. The drawings are created by the same users, who have already successfully coped with this task and now share their experience.

Create a mini tractor from a Neva power tiller

Considering the conditions required for the conversion, let’s dwell a little more on the required power. The power unit must have such a capacity to easily move its own weight together with the attached equipment, as well as the weight of the frame and the operator controlling the machine. As a successful example can be noted the modification MB-23S 9.0 PRO. This machine has a four-stroke engine and 9L horsepower.с., which is optimal for the necessary tractive force during the work of the power tiller with plows, ploughs, mowers and any other equipment connected to it.

Important! If your single-axle tractor does not have enough power to modify into a homemade tractor, the solution can be the purchase of an adapter. This option is not as convenient as converting a machine that has the right capacity, but still provides the ability to work sitting. Unfortunately, this option will eliminate the possibility of using certain types of attachments.

In this video we will conduct a review of the tractor from a power tiller:

Related Posts

| Denial of responsibility | Contacts |RSS