Metabo wev 11 125 quick review

Metabo angle grinder WEV 10-125 Quick

Gearbox with bevel gears, genuine INA needle bearings (appreciated by car enthusiasts), molded metal housing. No malfunctions whatsoever. Very high quality workmanship. Regarding the gearbox, we can add that to compare the quality of the angle grinder on the noise level, at least not professional! Gearbox with spur gears and bronze bushing, will sound different than with helical gears and needle bearing.

In softness and quietness of operation win only Chinese silumin pinions with plastic bushings instead of bearings, capable to confuse even the experienced master. There is no point in choosing an angle grinder by the way it sounds. But, given the experience with Bosch, there is always grease in the gearbox to check.

Gear Metabo WEV 10-125 Quick warms up much less than the Bosch 11-125 CIE, the latter after 5-7 minutes gaining temperature of 50 degrees. The Bosch service center considers this temperature normal, which is probably true. the angle grinder still works without problems.

As for the sound at maximum speed, Bosch works louder, with a higher tone, the difference is perceptible only in a direct comparison. In operation it is not principal.

Soft start is a must in modern tools. For an angle grinder is especially relevant. Firstly there is no jerk on startup, which can easily make an angle grinder drop out of your hands. Secondly, there is no current surge in the mains leading to a protection trip on the object. Leading to time lost in troubleshooting.

Protection against unintentional actuation. in general, any cutting tool should have this function. Just continuing the theme of the previous option, when in case of automatic operation you put the tool down, forgetting to set the switch to the “Off” position. Naturally, if voltage is applied, the tool will start without your knowledge. This is not the case with the Metabo WEV 10-125 Quick, you just have to switch the control key. The condition of the tool at the moment of activation of this type of protection will be shown by the blinking LED on the speed regulator.

Sufficient power. angle grinders with power less than 1000 watts in a circle of 125 mm, we do not take into account, for cutting something less than large, they are not suitable also because of the motor works at its maximum capacity.

Metabo WEV 10-125 Quick has a smart heat extraction system. No air is blown to the sides, but blown forward through the housing. This system effectively prevents the machine from being affected by dust. Metabo WEV 10-125 Quick has a built-in temperature sensor circuit that protects the tool from overheating.

Speed regulator is one of the main functions, allows you to change the speed depending on the material and grinding wheel in use. Today, without a regulator you can work only with one operation, strictly regulated by the technology card in the manufacture, any flexibility and flexibility is out of the question.

Thickness and weight. The Metabo WEV 10-125 has a thickness of only 65 mm at the widest point. Naturally, the slim one is easier to grip. Weight of the tool (with built-in antivibration handles and nuts) is approximately the same as that of the Bosch GWS 11-125 CIE, about 2.5 kg.

Constancy control is an electronic circuit that maintains the engine speed regardless of the load, moreover, the system maintains the constancy of the torque of the motor at different speeds. In the early models of domestic mowers, cheap domestic mowers, the speed regulator is completely useless. Because it has no such circuitry, it is not possible to operate the tool at low speeds.

Disc jam protection. called differently by different manufacturers, but the idea is clear. The tool stops instantly if the disc jams.

The possibility of repositioning the hood without any tools, just by pulling the lever. Indirectly, it can be attributed to the safety system. When working in hard to reach places it is easier to remove the cover than to change settings with wrenches and screwdrivers, as in the tool from Fiolent. In this case, there is not even such a bad idea.

Changing a disk without tools first such opportunity we tested with a quick nut from Bosch, bought separately for 45 dollars, fits on any angle grinder with a landing 14mm. Only positive impressions, the purchase is 100% justified.

Metabo WEV 10-125 Quick has its own, quick-clamping nut included. On the downside, no keyhole for unscrewing in case of jamming. On the plus side, small height, allows you to work at smaller angles to the material.

The nut from Bosch because of its thickness often clings to the material, though it is made more thoroughly and is more trustworthy.

Metabo quick-clamp nut, only fits on the tool, because of the specific lugs on the inside. The gearbox rotor has the right grooves for them. Easily clamps a standard 5 mm grinding wheel, contrary to the strange reviews on forums, people who do not read the instructions on the tool. Where it is clearly specified that the use of the quick-clamping nut with tools, where the thickness in the area of the clamping nut exceeds 6.8 mm, is prohibited. In such cases it is necessary to use a usual nut with two end holes. Tighten with the correct wrench.

There are also quick-clamping nuts from FUBAG, AEG If you still use a spanner, it makes sense to buy one. The disk change will not cause an unpleasant feeling of “will it unscrew or not”. Putting all kinds of shims from cardboard and plastic bottles under the disk is certainly a solution, but why? Why not use well-tried and proven solutions.

An anti-vibration handle was invented long ago and is absolutely necessary for professional tools. Compared to Bosch’s, the handle is more compact, as well as excellent vibration damping.

The length of the power cord is fundamentally important, here it is 4 meters. The main inconvenience of a short cord to work on the ladder with the extension cord.

The Metabo WEV 10-125 Quick has a warranty period when registering the WEV 10-125 Quick at the Factorynews. three years. Registration system is extremely simple and straightforward, no problems encountered.

Metabo wev 11 125 quick overview

  • Tool-free installation of the guard; anti-rotation locking
  • Metabo S-automatic safety clutch: when the blade is locked, it has the lowest kickback speed of any comparable tool on the market. for maximum user protection and continuous operation
  • Electronic motor overload protection, soft start and restart protection
  • Gear housing can be mounted with a 90° rotation for left-hand operation or for cutting
  • Carbon brushes that can be switched off to protect the motor
  • Grinding wheel diameter: 125 mm
  • Rated power consumption: 1100 W
  • Power output: 640 W
  • No. of idle speed: 2800. 10500 /minute
  • Speed at rated load: 8800 rpm
  • Torque: 3 Nm
  • Spindle thread: M 14
  • Cable length: 4 m
  • Vibration (surface grinding): 6 m/s²
  • Vibration (sanding with abrasive sandpaper disc): 2.5 m/sec²
  • Accuracy of measurement K: 1.5 m/s²
  • Sound pressure level: 93 dB(A)
  • Sound power level (LwA): 104 dB(A)
  • K measurement error: 3 dB(A)
  • Weight without power cord: 2.1 kg

Penultimate country of manufacture: China

Warranty: official Metabo warranty card

Hello! Please tell me why the in your store are lower than in other shops and sometimes even much lower?

Answer: Hello! Our store works for a regular customer, not a system where we would make 50% on every sale, but sell once a month. Thank you so much for writing to us! Come and shop with us, we will be happy to see you in our store!

Overview of the Metabo angle grinder WEV 15-125 Quick

This short review of the Metabo angle grinder WEV 15-125 Quick gives you an insight into the capabilities of the machine and the quality of the parts it comes with. Not so long ago, we with you considered one of the many ways to disassemble the angle grinder with their own hands. To disassemble the angle grinder and quickly put it back together is necessary in order to repair the tool in case of failure in the work or for preventive maintenance (gearbox lubrication, replacement of carbon brushes, cleaning parts from accumulated dust and dirt, etc.).

Today, in this article we will discuss with you a new model of a small-sized angle grinder German brand Metabo, namely the WEV 15-125 Quick. The cost of such an angle grinder ranges from 180-220 euros in specialized stores. the angle grinder is equipped with many useful and necessary in operation options, has a fairly strong motor for such disc diameter.1550W, which is quite enough to perform various types of work on wood, stone, concrete, metal and other materials.

For many of you, this article will be useful, as the brand is very well-known and popular among working people. The article will also help you decide on the choice of angle grinder, if you are looking for a good and high-quality angle grinder of professional class. To save time when changing the cutting disc, the Metabo angle grinder WEV 15-125 Quick has a Quick clamping nut that does not require a conventional two-pin wrench.

Figure 1. Quick clamping nut and locking lever for the guard

The Quick clamping nut secures the cutting wheel securely in the supporting flange and, what’s more important, can be quickly and easily unscrewed by hand in the opposite direction when replacing the cutting wheel or grinding wheel. large and easy-to-use spindle locking button, allows you to unscrew the Quick clamping nut and change cutting or grinding wheels quickly and easily.

See also  Which thicknesser is better Makita or Metabo

The angle grinder cover is quick and easy to fit, just by pushing the lever on the gearbox. Protective cover angle grinder, as you have already guessed, provides installation on a spindle cutting or grinding disc with a maximum diameter of 125 mm.

I also mounted and used 115 mm diameter diamond and grinding discs on this angle grinder. The tool can be operated steadily at different spindle speeds. A thumbwheel is available for setting the correct spindle speed for cutting and grinding wheels.

The spindle speed dial has a built in electronic speed indication and allows you to use the spindle at different speeds, e.g. 3000rpm to 11000rpm. This feature is very useful because different machining applications require different spindle speeds. To prevent damage to the tool or injury to the operator in case of a sudden stop of the spindle rotation (cutting disc jamming in the material) the tool is equipped with a release clutch.

Figure 2. Release clutch device

Device-decoupling coupling.consists of two discs that are pressed tightly together to prevent the rapid stopping of the rotor shaft rotation and the stress caused by it. Equipped with the optional anti-vibration grip for a comfortable grip when you’re working.

The anti-vibration handle can also be mounted in several positions on the gearbox housing.This feature turns an already great tool into a more reliable and versatile device. The tool is also equipped with a reconnection feature that locks you in case of a sudden power outage.

In other words, if you have been working with the tool and the electricity is suddenly cut off, the tool will not start by itself when the power is turned on again until you turn it on again.This innovation is also extremely useful because it eliminates the possibility of injury to the operator in case of spontaneous and sudden activation of the tool.

Figure-3. The electric motor is coated with a dust protection compound

Electric motor provides high wear resistance and accordingly high service life of tool, because rotor and stator are covered with dust proof compound.Carbon brushes ensure that the tool switches itself off when maximum permissible wear is reached (for safe operation of the electric motor).

Figure-4. Basic configuration of Metabo angle grinder WEV 15-125 Quick

Based on the above, let’s summarize, and so, let’s start with the advantages of this tool.

Main advantages of the Metabo angle grinder WEV 15-125 Quick :

◊ Sufficient number of useful features such as anti-vibration handle, restart protection, increased motor wear resistance, self-shut-off carbon brushes, sliding clutch, spindle rotation control, decent motor protection against dust and dirt.

◊ Strong enough motor 1550W; relatively light weight-2,4 kg.

◊ Quick saw blade change, quick locking of the blade guard in position.

Reviews and ratings for the Metabo WEV 11-125 Quick Grinder (603625500)

The accompanying pictures were provided by the manufacturer, the product appearance depends on the screen settings and may differ from the original. The manufacturer can change the design, specifications and equipment of the product without notifying the seller. Check your important parameters when ordering.

Advantages: Price-performance ratio. Dimensions and girth.

Disadvantages: No disadvantages, the line is very large, everyone can find the right tool.

Review: I tried the whole line but this one made my choice, the work is great, very comfortable, before I used a paly makita, the difference is heaven and earth. The characteristics are all for safe work, the only thing is that I tried it as a strokabo cutter, not enough power, but otherwise I was very pleased.

It has been my first time using this tool and I have never had a problem with it

Disadvantages: I have had this model in my hands for less than a month, so I can not say anything yet

Review: I took it for various locksmith jobs and it came very quickly. The quality is top notch as always. It feels very good in the field. The Quick release system for the convenience of the tool and the safety of the work. It has a good girth and does not jump out in my hands. The power on the concrete seems to be enough, well, not tried yet, otherwise flawless.

The advantages: This tool is well worth its money, it is well thought out and assembled at the highest level.

Disadvantages: Not at all, everything works properly, both electrically and mechanically.

Review: It is an excellent handy tool. Very nice set, relatively cheap. Very pleased with the functionality, enough power for any material. I’ve been using it for over a year now and it has never let me down. The warranty is certainly a bit small, but it is still holding up without a nag.

Advantages: The angle grinder has been carefully thought out to the last detail.In older models, the hood only rotates when the disc is removed.But the vibrating arm was much better.RPM control, soft start, long cord, case, protection against restarting after de-energizing (who did not catch running on the floor angular grinder, that can not assess).Previous w7-125 has served 16 years, twice changed the brushes, a little under the winding of the rotor, the repair is not profitable, the old woman takes honorable place on the shelf glory plumber.Let’s torment a new victim

Disadvantages: Well, this thing, as long as it works, there are just no disadvantages.Well, except for the case.1.Movable handle.2.The plastic is thin.3.It is not convenient to carry two identical cases (for example, with Metabo peorator) at the expense of the hinged handle.The best carrying cases were the Kress toolboxes with the Click-clack system.At least five of the cases could be put together.Who has a lot of work on the road with a large assortment of tools, this case is not too handy.And so, for storage, very nice.

Review: The photo shows an old and new handle.The old one has a much better cushioning due to the thicker buffer insert.Almost no handle, though.

Advantages: It has good speed and jogging.

Review: will be one year since purchase. Runs stable, had a preventive maintenance, everything is fine. The handle doesn’t slip and doesn’t pull out of my hands when I start. It cuts smoothly, no backlash. I’m very happy with it.

Advantages: Not expensive for its features

Review: Relatively not expensive powerful angle grinder, I use only a couple of months, very nice to work, has all the features for comfortable operation. I received it very quickly without any bugs or defects, good carrying case, lots of free space for various accessories, you can store everything in it with plenty of stock. Very good long cable of 4 meters, you can work in a large area.

Advantages: Robustness, quality

Advantages: price and performance

Review: angle grinder is not bad, the only problem is that the heat is very fast, though cools down not too long, but it’s still time. When sawing the profile pipe for about 15 minutes maximum continuous work, then a 10 minute break. It is easy to remove the 125 disks. Has not yet bitten while working. But I think it’s all ahead of us. Overall, not bad angle grinder for its money, works smoothly circle does not flutter when working, the normal speed and cope with the load.

Review: I like the clamping nut, it unscrews quickly and grips the blade securely. Low weight. But it vibrates in the hand a lot when working. It has a good grip and it works well with a good grip. it does not slip. Long cable and does not bend when twisted. I took it for me, I was cutting my country house fence, I was sawing metal profile pipes and sheets. It seems to cope, but it is warm, but it is bearable.

Advantages:. it was engineers, not marketing specialists who made this device. three year warranty (when was the last time you saw this?? me about 20 years ago). But you need to register on the site, it takes 2 minutes a quick-clamp nut. super convenient and fast system to turn and remove the protective cover. Lightweight, works without handle sometimes held with one hand. soft start. 4 meter cord made of very soft rubber. disk jam protection. speed control (at low speed it does not get warm. They say that the low speed is provided by the electric.

Disadvantages:. No middle (side) attachment (thread) for the handle, the platform plate (where there should be a thread for the middle position of the handle) is small and not the most convenient shape controversial solution with a handle that is not at right angles. All these nuances make it problematic to clamp the angle grinder in the stand. By the way, my competitors in similar models, too, do not have these bindings (saw only one purebred Chinese). I’m shocked, lord! Some woodpecker in the market has apparently decided that I don’t need it up to 1000w, and the rest are fine.

Review: I finally got my hands on a tool that was made by engineers, not by marketing experts. I’m shocked! I finally finally got the tool in my hand which was made by engineers not by marketing guys. And here everything is thought out to the smallest detail and ALL for the man. Here is a long cord, not a stump, here is a quick change of discs and turn the housing with the lever in a moment, soft start, protection against snagging the disc. The case is the bomb! Oh, my God.

Angle grinder (angle grinder) Metabo WEV 11-125 Quick 603625000, 1100 W

Live Christmas pine as a GIFT when ordering from 10 thousand!

Live Christmas pine as a GIFT when ordering from 10 thousand!

DEFAULT_VALUE] = [VALUE_ENUM] = 380x125x125 mm [VALUE_XML_ID] = 69d468d2-b206-11ea-ba93-e4434b0408b3 [VALUE_SORT] = 406 [VALUE] = 380x125x125 mm [PROPERTY_VALUE_ID] = 169338548 [VALUE_ENUM_ID] = 35730 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = 380x125x125 mm ) [MOSHCHNOST_VT] = Array ( [ID] = 109 [IBLOCK_ID] = 2 [NAME] = Power (W) [ACTIVE] = Y [SORT] = 4800 [CODE] = MOSHCHNOST_VT [DEFAULT_VALUE] = [PROPERTY_TYPE] = N [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = 47b20a27- a361-11e3-abcc-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT] = [

See also  How to charge the battery of an electric screwdriver from another battery

DEFAULT_VALUE] = [VALUE_ENUM] = [VALUE_XML_ID] = [VALUE_SORT] = [VALUE] = 1100 [PROPERTY_VALUE_ID] = 169338549 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = 1100 ) [DLINA_KABELYA] = Array ( [ID] = 137 [IBLOCK_ID] = 2 [NAME] = Cable length [ACTIVE] = Y [SORT] = 7600 [CODE] = DLINA_KABELYA [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = 5f5e137f- 3a67-11e4-b232-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = 4 m [VALUE_XML_ID] = d5a2415d-4222-11e4-b232-2c59e5476dc4 [VALUE_SORT] = 19 [VALUE] = 4 m [PROPERTY_VALUE_ID] = 169338550 [VALUE_ENUM_ID] = 1797 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = 4 m ) [MAKSIMALNOE_CHISLO_OBOROTOV_OB_MIN] = Array ( [ID] = 913 [IBLOCK_ID] = 2 [NAME] = Maximum RPM, RPM [ACTIVE] = Y [SORT] = 26300 [CODE] = MAKSIMALNOE_CHISLO_OBOROTOV_OB_MIN [DEFAULT_VALUE] = [PROPERTY_TYPE] = N [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = 0d73a230-bdcd- 11e5-b2e9-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT] = [

NAME] = Maximum RPM, rpm [

DEFAULT_VALUE] = [VALUE_ENUM] = [VALUE_XML_ID] = [VALUE_SORT] = [VALUE] = 10500 [PROPERTY_VALUE_ID] = 169338561 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = 10500 ) [NAZNACHENIE] = Array ( [ID] = 337 [IBLOCK_ID] = 2 [NAME] = Assignment [ACTIVE] = Y [SORT] = 27600 [CODE] = NAZNACHENIE [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = 48e42cad- 9539-11e3-bce7-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = Y [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = Peeling and Sanding of Various Surfaces [VALUE_XML_ID] = 71597425-ec98-11e3-a187-2c59e5476dc4 [VALUE_SORT] = 693 [VALUE] = Peeling and Sanding of Various Surfaces [PROPERTY_VALUE_ID] = 169338551 [VALUE_ENUM_ID] = 2800 [DESCRIPTION] = [

VALUE] = Stripping and sanding of various surfaces [

DESCRIPTION] = [DISPLAY_VALUE] = Deburring and sanding various surfaces) [VES] = Array ( [ID] = 374 [IBLOCK_ID] = 2 [NAME] = Weight [ACTIVE] = Y [SORT] = 31300 [CODE] = VES [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = 435ac712- 66fa-11e3-bce7-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = 2.1 kg [VALUE_XML_ID] = 39f11489-a7fc-11e4-b2e9-2c59e5476dc4 [VALUE_SORT] = 700 [VALUE] = 2.1 kg [PROPERTY_VALUE_ID] = 169338553 [VALUE_ENUM_ID] = 29023 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = 2, 1 kg) [TIP_DVIGATELYA] = Array ( [ID] = 1002 [IBLOCK_ID] = 2 [NAME] = Engine type [ACTIVE] = Y [SORT] = 54500 [CODE] = TIP_DVIGATELYA [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = 384b8d83- 20e1-11e6-bc5a-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = Brush [VALUE_XML_ID] = 75bbd3b8-0265-11e7-9e1a-2c59e5476dc4 [VALUE_SORT] = 4 [VALUE] = Brush [PROPERTY_VALUE_ID] = 169338563 [VALUE_ENUM_ID] = 20571 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = Brush ) [ZASHCHITA_OT_PEREGREVA] = Array ( [ID] = 598 [IBLOCK_ID] = 2 [NAME] = Overheat protection [ACTIVE] = Y [SORT] = 67800 [CODE] = ZASHCHITA_OT_PEREGREVA [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = 7b615b1b- f778-11e3-a187-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = Yes [VALUE_XML_ID] = 221db885-3dc8-11e4-b232-2c59e5476dc4 [VALUE_SORT] = 1 [VALUE] = Yes [PROPERTY_VALUE_ID] = 169338554 [VALUE_ENUM_ID] = 9377 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = Check] [RABOTA_PO_BETONU_KAMNYU] = Array ( [ID] = 1201 [IBLOCK_ID] = 2 [NAME] = Concrete/stone work [ACTIVE] = Y [SORT] = 88200 [CODE] = RABOTA_PO_BETONU_KAMNYU [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = 6d4b4cbc- bbf5-11e4-b2e9-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = Yes [VALUE_XML_ID] = 6d4b4cbe-bbf5-11e4-b2e9-2c59e5476dc4 [VALUE_SORT] = 1 [VALUE] = Yes [PROPERTY_VALUE_ID] = 169338565 [VALUE_ENUM_ID] = 31703 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = Check] [RODINA_BRENDA] = Array ( [ID] = 771 [IBLOCK_ID] = 2 [NAME] = Brand Country [ACTIVE] = Y [SORT] = 98200 [CODE] = RODINA_BRENDA [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = c73f2775- d5b5-11e3-a187-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = Germany [VALUE_XML_ID] = 3fd5e4c0-de6b-11e3-a187-2c59e5476dc4 [VALUE_SORT] = 3 [VALUE] = Germany [PROPERTY_VALUE_ID] = 169338555 [VALUE_ENUM_ID] = 10134 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = Germany ) [DIAMETR_KRUGA_PILNOGO_DISKA] = Array ( [ID] = 774 [IBLOCK_ID] = 2 [NAME] = Diameter of wheel / saw blade [ACTIVE] = Y [SORT] = 98600 [CODE] = DIAMETR_KRUGA_PILNOGO_DISKA [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = afe87b6e- ed3d-11e3-a187-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = 125 mm [VALUE_XML_ID] = afe87b6f-ed3d-11e3-a187-2c59e5476dc4 [VALUE_SORT] = 3 [VALUE] = 125 mm [PROPERTY_VALUE_ID] = 169338556 [VALUE_ENUM_ID] = 10194 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = 125 mm ) [PLAVNY_PUSK] = Array ( [ID] = 775 [IBLOCK_ID] = 2 [NAME] = Soft Start [ACTIVE] = Y [SORT] = 98700 [CODE] = PLAVNY_PUSK [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = afe87b70- ed3d-11e3-a187-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = Yes [VALUE_XML_ID] = afe87b75-ed3d-11e3-a187-2c59e5476dc4 [VALUE_SORT] = 1 [VALUE] = Yes [PROPERTY_VALUE_ID] = 169338557 [VALUE_ENUM_ID] = 17458 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = Yes ) [ZASHCHITA_OT_NEPREDNAMERENNOGO_PUSKA] = Array ( [ID] = 781 [IBLOCK_ID] = 2 [NAME] = Unintentional start protection [ACTIVE] = Y [SORT] = 99300 [CODE] = ZASHCHITA_OT_NEPREDNAMERENNOGO_PUSKA [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = afe87ba2- ed3d-11e3-a187-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

NAME] = Unintentional start protection [

DEFAULT_VALUE] = [VALUE_ENUM] = Yes [VALUE_XML_ID] = 63f497ca-9500-11e6-a699-2c59e5476dc4 [VALUE_SORT] = 1 [VALUE] = Yes [PROPERTY_VALUE_ID] = 169338558 [VALUE_ENUM_ID] = 17460 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = Available ) [ELEKTRICHESKAYA_REGULIROVKA_OBOROTOV] = Array ( [ID] = 782 [IBLOCK_ID] = 2 [NAME] = Electric Speed Control [ACTIVE] = Y [SORT] = 99400 [CODE] = ELEKTRICHESKAYA_REGULIROVKA_OBOROTOV [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = afe87ba5- ed3d-11e3-a187-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

NAME] = Electric Speed Control [

DEFAULT_VALUE] = [VALUE_ENUM] = Yes [VALUE_XML_ID] = a2ebf614-f092-11e3-a187-2c59e5476dc4 [VALUE_SORT] = 1 [VALUE] = Yes [PROPERTY_VALUE_ID] = 169338559 [VALUE_ENUM_ID] = 20293 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = Check] [CHISLO_OBOROTOV_KHOLOSTOGO_KHODA] = Array ( [ID] = 947 [IBLOCK_ID] = 2 [NAME] = Idle RPM [ACTIVE] = Y [SORT] = 102200 [CODE] = CHISLO_OBOROTOV_KHOLOSTOGO_KHODA [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = 0572af02- 3f3d-11e5-b2e9-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = 2800-10500/min [VALUE_XML_ID] = 9d095e85-ccec-11e5-b2e9-2c59e5476dc4 [VALUE_SORT] = 39 [VALUE] = 2800-10500/min [PROPERTY_VALUE_ID] = 169338562 [VALUE_ENUM_ID] = 11646 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = 2800-10500/min ) [REZBA] = Array ( [ID] = 826 [IBLOCK_ID] = 2 [NAME] = Thread [ACTIVE] = Y [SORT] = 110700 [CODE] = REZBA [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = c40590f2- 181f-11e4-b232-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT] = [

DEFAULT_VALUE] = [VALUE_ENUM] = M14 [VALUE_XML_ID] = d5a2415c-4222-11e4-b232-2c59e5476dc4 [VALUE_SORT] = 44 [VALUE] = M14 [PROPERTY_VALUE_ID] = 169338560 [VALUE_ENUM_ID] = 10446 [DESCRIPTION] = [

DESCRIPTION] = [DISPLAY_VALUE] = M14 ) [BYSTROZAZHIMNAYA_GAYKA_SDS] = Array ( [ID] = 1064 [IBLOCK_ID] = 2 [NAME] = SDS quick clamp nut [ACTIVE] = Y [SORT] = 121400 [CODE] = BYSTROZAZHIMNAYA_GAYKA_SDS [DEFAULT_VALUE] = [PROPERTY_TYPE] = L [ROW_COUNT] = 1 [COL_COUNT] = 30 [LIST_TYPE] = L [MULTIPLE] = N [XML_ID] = afe87ba3- ed3d-11e3-a187-2c59e5476dc4 [FILE_TYPE] = [MULTIPLE_CNT] = 5 [LINK_IBLOCK_ID] = 0 [WITH_DESCRIPTION] = N [SEARCHABLE] = N [FILTRABLE] = N [IS_REQUIRED] = N [VERSION] = 1 [USER_TYPE] = [USER_TYPE_SETTINGS] = [HINT]

DEFAULT_VALUE] = [VALUE_ENUM] = Check [VALUE_XML_ID] = c972aba9-b730-11e8-94f9-2c59e5476dc7 [VALUE_SORT] = 1 [VALUE] = Check [PROPERTY_VALUE_ID] = 169338564 [VALUE_ENUM_ID] = 31699 [DESCRIPTION] = [

Angle grinder (angle grinder) Metabo WEV 11-125 Quick 603625000 is designed for various types of work on grinding and cutting metals and other materials. Metabo Quick allows you to change accessories without tools. Has everything you need for comfortable working, namely: full-wave electronics, Metabo S-automatic automatic safety clutch, electronic overload protection, electronically controlled soft start, restart protection.

To place an order, click on the product “angle grinder Metabo WEV 11-125 Quick 603625000, 1100W” and send it to the “Cart. Then place your order with your details. We will deliver your order to the address you specify in the order as quickly as possible.

angle grinder (angle grinder) Metabo WEV 11-125 Quick (603625000)

Register online and get special from your first purchase!

This product is delivered prepaid.

Spindle lock in case of a jammed disc

Electronic speed adjustment

Constant RPM maintenance

Spindle lock if the disc jams no
Gross weight 2.7 kg
Vibrating handle yes
Battery powered no
Vibration damping system no
Electronic rpm adjustment no
Brushless motor no
Constant speed maintenance no
Spindle thread М14
Circle diameter 125 mm
Professional yes
Min. rpm 2800 rpm
Max. rpm 10500 rpm
Soft starter yes
Packed in box
Manufacturer’s item codes 603625000
Power (W) 1100 W

angle grinder (angle grinder) Metabo WEV 11-125 Quick (603625000) 1100W F125mm, box

Metabo WEV 11-125 Quick angle grinder (603625000).Supplied in a box.

fatigue-free than ever: Compact angle grinder with variable speed control and the smallest housing circumference in its class for perfect ergonomicsBetabo Marathon motor with patented dust protection features 20% higher overload resistance and 50% higher torqueVario Constamatic (VC). full-wave electronics with electronic speed control wheel: for working at speeds depending on the material and almost constant speed under loadChanging wheels quickly and without tools at the touch of a button with Metabo M-QuickSetting of the protective cover without tools; locking with torque protectionMetabo S-automatic safety clutch: ensures the lowest possible impact rate of similar tools on the market if the disc is blocked. for maximum user protection and uninterrupted operationElectronic motor overload protection, soft start and restart protectionGear housing can be mounted rotated 90° for left hand operation or for cuttingDisconnectable carbon brushes for motor protection.

Features:Diameter of grinding wheels. 125 mmRemote power consumption. 1100 WattRetractable power. 640 W no-load speed. 2800. 10500 rpm Speed at rated load. 8800 /minTorque. 3 NmSpindle thread. M 14Weight without mains cable. 2.1 kgCable length. 4 м

Scope of delivery:Protective shroudSupport flangeM-Quick clamping nutAdditional handle Metabo VibraTech (MVT)

Metabo WEV 11-125 Quick angle grinder (angle grinder) (603625500)

Register online and get special from your first purchase!

This product is delivered prepaid.

Spindle lock in case of jammed discs

Electronic speed control

Spindle lockout when the disc jams no
Gross weight 3 kg
Net weight 2.1 kg
Vibrating handle no
Powered by battery no
Vibration damping system no
Electronic speed adjustment no
Brushless motor no
Constant speed maintenance no
Spindle thread М14
Circle diameter 125 mm
Professional yes
Min. rpm 2800 rpm
Max. speed 10500 rpm
Soft start yes
Packed in case
Manufacturer’s product codes 603625500
Power (W) 1100 W

angle grinder (angle grinder) Metabo WEV 11-125 Quick (603625500) 1100W F125mm, suitcase

Metal angle grinder Metabo WEV 11-125 Quick (603625500). Comes in a case.

fatigue-free than ever: Compact angle grinder with variable speed control and the smallest housing circumference in its class for perfect ergonomicsMetabo Marathon motor with patented dust protection features 20% higher overload resistance and 50% higher torqueVario Constamatic (VC). full-wave electronics with adjustment wheel: for material-dependent speeds that remain almost unchanged under loadChange wheels quickly and without tools at the touch of a button with the Metabo M-Quick systemTool-free installation of the blade guard; locking with torque protectionMetabo S-automatic safety clutch: when the blade is locked the lowest kickback of any comparable tool on the market. for maximum user protection and smooth operationElectronic motor overload protection, soft start and restart protectionGear housing can be mounted rotated through 90° for left-handed operation or for cuttingDisengaging carbon brushes for motor protection.

Features:Diameter of grinding wheels. 125 mmRemote power consumption. 1100Wpower output. 640W No-load speed. 2800. 10500 /min RPM at rated load. 8800 /minTorque. 3 NmSpindle thread. M 14Weight without power cord. 2.1 kgCable length. 4 м

Scope of delivery:Protective shroudSupport flangeM-Quick nutMetabo VibraTech (MVT)Extension handle Plastic carrying case

angle grinder Metabo WEV 11-125 QUICK (603625000), 1100 W, 125 mm.

Before you buy Metabo angle grinder WEV 11-125 QUICK (603625000), 1100 W, 125 mm I want to read real reviews about it owners, those people who have bought and used the product for a while. Read reviews of real customers about the device, learn all the advantages and disadvantages. If you own Metabo angle grinder WEV 11-125 QUICK (603625000), 1100W, 125mm, share your opinion, leave your review. Every comment sent is reviewed and moderated. Specialists answer your questions about the Metabo angle grinder WEV 11-125 QUICK (603625000), 1100 Watt, 125 mm. Manufacturer: Metabo.

Pros: The quality from Metabo is very happy, the power is suitable for concrete, but heavy.

See also  Bosch gsr 18 2 li plus review

Cons: I have been using it for the first month and am still only ecstatic.

Review: The first expensive angle grinder in my hands and it is just a new experience for me. But you can see the quality right away. No backlash, no noise, comfortable single handed body. And the casing is cool, and the handle is there, only work without it all, as I got used to, but the nut clamp is very surprising in its simplicity.

Pros: It’s inexpensive. Soft start works great. The overload protection saves.

Review: I decided not to listen to anyone in the choice of tools because everyone likes different, here’s an example this angle grinder floors well, and convenient to hold when working and my ears are not filled with a squeal, and my grandfather on the contrary is not that, here before everything was different, well, it’s time to understand that before everything was one, now everything is different. It has an overload protector, too. Which works. It works great, not a jerk in the hand but a smooth start. That is not a jerk out of the hands it starts the work. In short, lean on what you like and how comfortable.

Pros: I liked it all, since I have one

Review: I recommend to buy, very good angle grinder with adjustable speed, the disc can be removed without a wrench, for processing tiles best

Pros: Decent price for an angle grinder, normal power output and many useful features.

Cons: Adjusting roller is hard to switch, if you work somewhere in the processing it gets clogged with dust and becomes even harder.

Review: I bought it as a general purpose model, I am very happy with the way it works. It’s light, yet powerful and easily held with one hand. There is both a vibrating handle and a quick nut, and with electronics order. The RPM adjustment also helps, but the changeover takes some getting used to.

Pros: Cheap price with good power, comfortable handles, well pressed buttons. Stable, fast speed under load.

Review: I am very happy with the angle grinder, it is very handy. With a large margin of safety. Does not start jerkily but is smooth and picks up high RPMs quickly. I don’t notice any sagging even under load. Reasonable price, high quality for the price. I hope to use it for a long time. No problem at all with the metal, I quickly cut the pipe and trim the workpiece easily.

Pros: I am happy with the quality and materials. Very narrow for girth, easy access in the shroud and nuts.

Review: I’ve replaced a bunch of Chinese and brand-name grinders, all fell out for various reasons, or the gearbox is weak or something in the electrics, up to six months of work. I decided to buy Metabo. I did not buy the expensive one for a test. I found this model under 10 thousand. The result so far satisfied, holds up almost a year, no complaints in the electrical part, gearbox is practically without wear and tear, I change the grease, but the load is always high. It seems to be reliable, but next time I will use a more powerful version anyway.

Pros: Quick is irreplaceable! Powerful, for my tasks is more than enough

Disadvantages: It is heavy when working with one hand

Don’t leave it on the job unattended, you might not be the only one who enjoys it(((

METABO WEV 11-125 QUICK. Болгарка с регулировкой оборотов. Новинка от METABO. Сделано в Германии.

Pros: The best choice I have seen, Metabo is the best quality with all its features, easy to work with one hand, for me it is lightweight and its girth is excellent.

metabo, quick, review

Cons: I don’t see any drawbacks or flaws in it.

Review: I do not use it much but I love it, the best of all I have worked with so far and the price tag is very affordable. The Quick release system is very handy, a trifle but very worthy.

Pros: Quick is indispensable! The power is great, it’s more than enough for my needs

Disadvantages: It is heavy when working with one hand

Pros: Powerful, soft start and adjustable speed, long and soft wire that will not blunt in the cold

Pros: I think in its segment one of the best options, value for money have not seen anything like it.

Cons: In my hands for only a couple of months, everything suits me.

Review: I bought it with the screwdriver at the same time, I am completely satisfied with the product. The cut is smooth, does not hit the hands, no vibration. I am pleased with the company Metabo, they have a very large choice of tools with different characteristics and price policy. I can always find something to suit my needs and it will be a good quality product.

Pros: Metabo is great I tried it yesterday

Review: Would advise my friends to buy it

Review: It has a very good grip and it works with one hand thanks to the narrow gear train. All in all, an angle grinder is a must. The long and flexible cable does a lot of the work without an extension cord. I’ve been using it on business trips for 3 years now, it’s a beast.

Pros: The specified features, build quality (Germany).

Review: I got what I wanted. I was guided by the reviews. I was very happy with the good discount when I ordered.

Pros: It is a very modern angle grinder with all the handy tricks.

Cons: No, I think it is very cheap even.

Review: The Balgarine is awesome. Very comfortable to work with. It has a very tight gearbox and it is great for one-handed use. Lots of tricks, like the vibrating handle, quick-clamping nut, soft start. It has enough power, and the cut is very smooth. I recommend it for everyone to consider.

Review: The product is super. After what I had a 90s angle grinder, it’s just a fairy tale.

Review: angle grinder for its money works like a beast. Cuts metal without any problems, the wheel never broke off. Runs smoothly and without big sagging under load. I usually work with it in the garage with metal pipes and angles. I love this grinder and it works great for my money.

Recall: I have been using the angle grinder for a very long time, I think that for this price tag is the best option, unless another branch of Metabo look. The device cuts very smoothly, there is no vibration, it is smart that it has a soft start for such power and it does not jump out of hands when powering on. It is desirable to put extra grid on the air intake and when working with reinforced concrete not to rush, but it binds if a large load to give.

Pros: high rpm and stable operation

Disadvantages: Heats and vibrates, makes hands tired

Review: The extra handle really does reduce the vibration a bit when working. But the angle grinder itself still vibrates a lot, I make a break in about 30 minutes after starting to work. Well, picking on an 8,000 rudder is a bit of an exercise in. When working with metal cutting tasks vypolyanet and can grind, the other thing is that the heat if heavily loaded. I don’t have any problems with it if it’s done evenly.

Pros:. M-Quick quick release nut;. good power, even with plenty of reserve for home/garage and small construction work;. Ability to work on concrete;. The speed control;. Power on indication, overheat protection and protection from power on after restoring the plug when the button is on;. easy working in general.

Disadvantages: It is my first angle grinder and it is really easy to work with.

Review: This is my first angle grinder. I decided to repair the balcony (in some places cracked concrete and armature came out). I’ve been looking at different models and reviews for a long time. The price-performance ratio makes it better than others. With suitable discs perfectly cuts and grinds concrete (to protect against large particles installed on the duct budget version of the filter from kapron). Fittings and, later, metal parts of steel and stainless steel is often cut practically effortlessly (large power margin). Despite the power, the vibration from it is relatively small, which allows you to make a fairly accurate cuts (within acceptable limits). Probably one of my best purchases among the power tools. Loved it so much that later I made a tray for it in my toolbox:)

Review: grinder is not bad, the only problem is that the heat is very fast, though cools down too long, but it’s still time. When sawing the profile pipe for about 15 minutes maximum uninterrupted operation is enough then a 10 minute break. The 125 disks are easily removable. Hasn’t bitten yet when working. But I think all is yet to come. I use this grinder for my money, it works evenly, the wheel does not flutter when working, the speed is normal and can handle the load.

Review: I use this angle grinder from Metabo. Works fine evenly for more than a year without interruption. Long cable 4 meters, smooth start, never bitten. overload protection. The warranty period has passed. No problems, it works like a new one, Metabo is not a waste of money took. No backlash on the disc, clamps well with the nut. Extra handle available. The protective cover is also there.

Related Posts

| Denial of responsibility | Contacts |RSS