Kit for converting a power tiller into a minitractor

Fabrication instructions

After deciding on the construction with the right parameters you can start building the machine.

Making a frame step by step

To create the frame, you usually use square steel pipes or angles, you can also use channel bars.

modified power tiller to mini tractor by village Farmer

  • Cut the metal pipe into the right size pieces. Their number and parameters depend on the intended size and capacity of the machine.
  • Weld the two half-frames and join them with hinges. For this purpose, a PTO shaft from a truck is suitable.

Check that the frame is fitted correctly when the work is complete. If everything fits, go on to the next unit, if not, go on to the next page.

Another option for the frame is all-metal. In such a construction you need to connect 2 longitudinal members (right and left) and 2 crossbars (front and rear). Longitudinal members and crossbars are made from a channel. A metal bar is used as a cross beam.

In the back of the frame it is recommended to make a hitch, so you can use attached implements and a cart (trailer).

Power tiller convert to mini tractor

Making and mounting the undercarriage

To equip a homemade tractor with a full-fledged front undercarriage you can buy hubs complete with brake system and preferably complete with steering rods, steering wheel, gearbox and steering column.

Or assemble everything by yourself. To do this:

  • Select the metal profile tube (must match the size of the front axle).
  • To mount wheel hubs to pipe ends.
  • Attach the front axle to the center of the front frame.
  • Assemble the steering rods, then align them with the steering gear.
  • Install and adjust the steering rod and rudder.
  • To construct the rear axle in a similar way, from profile pipe and hubs.
  • Fit the pulley, which transmits the torque from the engine to the other chassis components.

Installing the motor

  • To mount the motor, weld an iron plate to the frame and drill holes for the motor mounting locations. Using bolts, mount the motor on the frame. It is better to use “floating” (sliding) mounting, this will simplify adjustment and provide the necessary tensioning of the belts.
  • Assemble the belt transmission, which is needed to transmit the force from the power plant to the rear axle of the minitractor. It is important that the PTO shaft pulley should be in the same plane as the pulley of the machine’s rear axle. It’s a good idea to protect the belt drive system with a protective cover to prevent it from slipping during cutting and to extend its service life.
See also  What oil to mix with gasoline for grass trimmer

Install Trailer Trolley for Kultivator/Hand Tractor/Mini Tiller/Rotobator 9hp Farm walking tractor

Hitching up the hydraulics

Hydraulics are used to control and adjust both trailed and mounted implements, e.g. the working depth can be adjusted. It includes the following components: oil pump, oil tank, hydraulic cylinder and distributor. The entire system is connected by flexible, oil-resistant hoses.

Algorithm of installation of hydraulics on a single-axle tractor:

  • Determine the position for the pump, distributor, pistons and other extras. The distance from the motor output shaft to the nearest force transfer point of the hydraulic system should be minimal.
  • Install the pump as close as possible to the drive shaft. the reservoir of operating oil must be positioned above the piston unit to ensure a free flow of fluid to the pump vanes and to reduce the loss of useful mechanical energy. To ensure continuous operation of the system, a filter is installed between the tank with fluid and the pump.
  • The pump is connected to the hydraulic valve with oil-resistant hoses, which is equipped with controls. The oil flow divider controls the oil flow direction and delivery to the cylinders and blocks the flow when idling.
  • After installing the distributor, the hydraulic cylinders are installed on the working part of the frame. These are special piston units designed for use in the hydraulic system. They can also be made from oil-type car shock absorbers.
  • Fixing mechanisms are determined by the type of equipment, its configuration and the nature of work performed with it.

Installation of a brake system

For installation, you can buy new parts to create a braking system or use factory parts from the car.

  • Determine the location of the brake pedal and brake master cylinder.
  • Make a bracket for them.
  • connect the cylinder to the brake drums with oil-resistant hoses.
  • Check brake system for leaks.

What is a minitractor??

Before you make a mini-tractor yourself, you need to accurately determine the entire set of elements and assemblies included in its design. This type of equipment is the size of a passenger car and can have an output of 15 40 liters.с. When deciding which model of mini-tractor to choose, you should consider all the functions it has to perform. Choosing a basic kit for converting a power tiller into a mini-tractor, the purchase of attachments must be made separately. It is important that the equipment is properly fastened to the machine.

Some models can be equipped with 2 or 4 driving wheels. Choosing the type of drive, you usually take into account the topography of the terrain where you plan to use the tractor. The cost of four-wheeled mini-tractors is considerably higher, but they are more powerful. After that, determine what engine will be installed on the minitractor: diesel or gasoline.

See also  Gasoline lawn mower what to choose.

The latter are installed on many models, but they may already be obsolete. Diesel engines are more expensive than gasoline engines, but they are more durable and economical. A water-cooled diesel engine is ideally suited.

Choosing the power of a mini-tractor, usually take into account the area of the land. If you need to cultivate up to 2 hectares of land and mow lawns, the engine up to 5 6 liters.с. fits perfectly. Working on an area of up to 5 hectares and removing snow is possible on a mini-tractor, whose engine has a capacity of up to 13 liters.с. Machines with 15 to 40L engines can handle larger areas.с. It should be remembered that for a machine with more power more attachments are suitable.

A mini tractor from a power tiller Salyut

Products under the brand of Salut are equipped with engines BriggsStratton, Kohler Courage, Honda and others. Power of the machines is 6-7,5 liters.с. These tractors are equipped with a mechanical two-speed gearbox with reverse and an additional reduction gear. The torque is transmitted by the V-belt transmission to a mechanical gearbox connected to the drive half-axles. Two belts are used in the kinematic arrangement, which reduces the risk of slippage under load and increases the service life and torque transmitted.

Due to the nature of the transmission, Salutes are often used as starting materials for building tractors with two- or four-wheel drive. Before converting a single-axle tractor into a mini tractor with their own hands, the owner can buy a ready-made set of parts for conversion.

When converting a Salyut into a minitractor, it is recommended that:

  • Expand the front axle track to 1200 mm (to improve stability);
  • Increase the track of the rear base axle by installing homemade or factory semi-axles;
  • Use regular tires as drive wheels.

Necessary consumables, parts and spare parts

To understand what components are needed to create a machine, you need to know what components it includes. This is an important aspect that allows you to buy the right elements at once and will avoid unnecessary spending.

  • Frame. made from any kind of metal;
  • device for turning;
  • brakes;
  • seat;
  • Metal, necessary for the cladding of the body;
  • hitch helps to connect other equipment.

These components are not difficult to buy: there are many of them at car breakdowns or scrap yards. But the choice of these components should be approached responsibly. Often they are no longer new, so you need to carefully inspect them for damage. In case of defects, the homemade machine will not work properly.

Diagrams for constructing a mini-tractor

At the very beginning of the work is required to disassemble the schematics of your planned minitractor. You can make drawings and calculate the dimensions yourself, it does not require any special skills, just a pen, pencil and logical thinking. The main thing in this is to maintain a clear balance, so that in further work no emergency.

See also  How to change the chain on a power tiller

Converting a power tiller into a mini-tractor

For agricultural work on relatively small plots of land, the best option is a mini-tractor. As a rule, the factory version costs a lot of money, but it is possible to make a minitractor on the basis of a walking tractor much cheaper. It is important to understand that the most necessary element of a homemade tractor is a single-axle tractor, and it must meet certain requirements. On how to choose a suitable model, we will talk about below.

Self-transformation of a Moto-Block into a mini-tractor

The problem associated with the conversion of a power tiller into a mini-tractor with their own hands is an exciting issue for most people who have their own gardening farms. Currently, a single-axle tractor is already known to almost any citizen, and owners of land plots are familiar with all the advantages and disadvantages of such equipment.

There are various models of power tillers, which differ from each other by their size and power, and some of them can be converted into mini-tractors. The best option in this case is a single-axle tractor Neva, as shown in the photo.

To convert a power tiller into a mini-tractor, you will need the following materials:

  • The single-axle tractor itself.
  • Metal brackets.
  • Welding equipment.
  • Iron pipes.
  • Wheels (2 pcs.).
  • The seat taken from an old car.
converting, power, tiller, minitractor

Or you can buy a ready-made kit to convert a power tiller into a mini-tractor.

In addition, a necessary component for creating this type of agricultural machinery will be a set of tools.

Assembling a mini-tractor from a power tiller

The single-axle tractor is an indispensable helper in agricultural tasks. Multifunctional and powerful machine is a small tractor that performs the bulk of the work on the plot. With all the advantages of technology, it has a serious disadvantage without the operator and his physical efforts, the unit will not work. But such a device can be independently improved. If you follow the recommendations of experts and have a set for remodeling, you can make a mini-tractor from a power tiller.

Necessary tools

Regardless of which model of agricultural unit is chosen, the general principles and set of tools for converting a power tiller into a minitractor are the same. There is also on sale a ready-made kit that allows you to easily perform this task. It includes everything you need, and In general, you need to have the following items and materials available at the time of assembly:

  • Angle grinder with discs;
  • a drill, a set of drill bits;
  • welding machine;
  • set of tools (wrenches, screwdrivers);
  • fasteners, bolts, nuts;
  • channels, metal pipes;
  • metal sheets and profiles;
  • two additional wheels;
  • operator’s seat hitch;
  • steering mechanism, pedals;
  • Single axle tractor itself.

Related Posts

| Denial of responsibility | Contacts |RSS