How to wind a fishing line on a lawnmower

How to tuck the fishing line into the grass trimmer spool? Video tutorial

Warranty exhaustion of the factory grass trimmer filling will inevitably require the replacement of the line. Having a very rough idea of how to tuck the line into the grass trimmer reel by themselves, beginners are reluctant to take on this task. However, with some skills, mastering this simple science does not present any difficulties, and the following similar instructions will facilitate this process as much as possible.

Algorithm of filament winding

Depending on what model of grass trimmer is used, choose the type, thickness and length of the line. Cord diameter can be from 1.2 to 4 mm. It’s not hard to guess that the thicker you tuck the cord, the harder and thicker grass it can cut.

In most cases, a universal line with a diameter of 2 mm is used.

To find out which diameter of line you can use on your mower, there are three methods.

  • Look at the information regarding cord thickness in the machine manual.
  • Look at the bobbin itself. There may be information on the available line diameters.

The fishing line is wound on a spool in the mowing head. That’s why it needs to be opened first (mentioned above). There are two ways to wind the cords.

The first way

To correctly determine how many meters of fishing line will be needed for a particular coil, you need to wind it on the bobbin so that the coil does not exceed the diameter of the curbs. If the line is sticking out over the edges of the bobbin, you will not be able to fit it into the bobbin case. Once you have decided on the length of the material, it must be threaded onto the bobbin, so do the following.

  • The line must be folded in half so that one end is 10 to 15 cm longer than the other.
  • Note that the bobbin is divided into two parts by the center rim, which is where the charging begins. Find the groove on the frame and bend the filament into it by applying slight pressure.

How to FIX Uneven Line. SPOOLING a Baitcaster (How to SPOOL a Baitcaster 2018)

Second method

Some spools have a second way of spooling the filament: you can charge two lengths of filament instead of one folded in half. The line is changed according to the following algorithm.

  • Before changing or loading new thread into the spool, determine how many meters of thread are required using the method above.
  • Bend one end of the filament into a hook.

For Shtil brushcutters there is a very simple and quick way to change the filament without disassembling the mowing head, watch this video.

See also  Bosch arm 37 review. Bosch arm 3200 electric lawnmower

The ends of the filament sticking out of the holes in the cover can be cut to the required length when the part is installed in the trimmer. There are two ways to do this:

How to wind the fishing line in a brushcutter

  • by turning on the grass trimmer (as it rotates, the ends of the line will cut on the knife, fixed for this purpose on the guard);
  • by cutting off the extra ends with scissors so that they do not touch the body of the housing.

The second method is used when a large diameter cord has to be placed and the trimming blade cannot shorten it.

If the filament has been charged into the mowing head but the projecting filament ends are not long enough, they must be lengthened before starting the machine. this applies to a head with manual adjustment. However, there are also cases when using a semi-automatic mowing head when, due to insufficient length of the protruding cord ends, they are not automatically extended. In such a case, it is necessary to turn off the machine (it is obligatory to pull the plug from the socket on an electric machine), manually press the button located at the bottom of the part, and pull out some fishing line. After this procedure the cord is able to extend again due to centrifugal force if you set the spindle to the maximum rpm.

No matter how thick the line is, remember: in order not to constantly interrupt your work and not to change the cord, you should avoid areas where the working tool can touch hard surfaces (stones, curbs, thick dry twigs, etc.), but the line should not be too thick.д.).

How to wind the line on a STIHL grass trimmer reel

When spring arrives, people often spend their free time in the garden. When the weather gets warmer, people try to get rid of weeds and grass on their lawn. It is difficult to do it manually, especially if the area is very large, so a lawnmower will help. With this technique it is possible to mow grass and remove weeds. it is a suitable device for mowing unwanted plants near the fence, at home, between the rows in the garden in the flower bed and so on. Read here how to choose the right mower for your garden! The cutting element in this device is a fishing line (strong polyethylene thread), which is wound on a special element. a spool. But over time, the fishing line wears out and it becomes necessary to replace it. In this article we will talk about how to refill the line in the lawnmower.

How to wind the line on the grass trimmer reel

The head. the main part of the grass trimmer. It consists of a base with a spool, on which the filament is wound. There are three types of heads in total:

  • Manual. Allows the cord (fishing line) to be extended manually after the engine has completely stopped.
  • Semi-automatic. Using this head is simple and easy. It operates on the following principle: having waited until the grass trimmer reaches maximum revolutions, the user lightly knocks the head of the device on the ground, due to which the blocking of the line is removed. Thus, the cord is advanced due to centrifugal force, and the owner of the machine has only to cut it with a knife.
  • Automatic. The line is fed after the engine speed has been reduced. Such a head turns out to be convenient in cases where there is a need to carry out prolonged work. The disadvantage of the device, in turn, is the rapid wear and tear of the cord.
See also  How to make a mixture for a lawn mower. Features of the gas station

Now, to find out how to refill the grass trimmer spool, you should pay attention to the choice of cord.

wind, fishing, line, lawnmower

Types of spools

There are 3 types of the most popular trimmer heads:

Mechanical

Mechanical spool is a plastic or metal disk, in which in different ways fix one or more small pieces of fishing line, which makes it necessary to constantly manually change the line on it.

Here are the most popular models of such heads:

Semi-automatic (collapsible)

Despite the variety of models and differences in appearance, coils of this type are designed and work on the same principle.

The base connects the other elements of the trimmer head to the brushcutter or electric mower through a threaded bushing fused into it, so each reel fits only that trimmer, the diameter of the gearbox shaft or the lower motor corresponds to the diameter of the bushing.

There is a spring inside the base that supports the bobbin, pushing the pressure part outward through the removable housing.

How to fix a pull starter recoil spring and replace a stuck or limp pull cord

the bobbin and bobbin case have clamps that prevent the former from turning, but when the operator hits the ground with the pressure part, the bobbin is released from the clamps of the removable bobbin case and rotates freely.

There are holes in the removable body for the string, and they are located so that the line exit from the bobbin is noticeably higher, it ensures a reliable fixation of the line in the working condition.

When the operator hits the ground with the presser part, the bobbin enters the bobbin case and all the holes through which the line runs over the bobbin are aligned. Centrifugal force then pulls some of the wound string outward, and when pressure on the pressure part disappears, the bobbin comes out of the housing and takes up its working position again.

Automatic (non-detachable)

Regardless of the model or manufacturer, all automatic reels are designed and operate on the same principle.

They consist of the following parts:

A threaded sleeve is soldered into the body of the base, and there are ratchet retainers on the inside that allow the bobbin to rotate in one direction only. Inside the bobbin there is a through channel for the line. The cap is firmly attached to the bobbin, and the curved edges facilitate its rotation for winding the line.

Store-bought grass trimmer is ready to work in it is tucked standard kapron fishing line. It cuts grass, but it does the job poorly quickly fails and only mows young, thin plants. Old grass and weeds with woody stems it does not take at all or cuts with difficulty, quickly wearing down. It only lasts a short time, after which the line in the trimmer needs to be replaced.

See also  How to refill a trimmer line in a grass trimmer

It is not recommended to use fishing line, it is better to use special line with fiberglass core. It is sold in construction stores. Choose one with a square or triangular cross section, their sharp edges work like knives.

Consumption of lines for grass trimmer when using faceted and reinforced consumable material is reduced by 2-3 times, the same amount of productivity increases compared to the round section of the line and the line, not reinforced with fiberglass.

wind, fishing, line, lawnmower

Purchase the material with a diameter no smaller than that recommended by the manufacturer. If you don’t know the diameter, look at the size of the holes in the outer casing of the mowing head: the diameter of the working thread must be slightly smaller than the hole so that it can pass through freely.

Buy enough cutting thread (for 2-3 changes), try to buy different versions to compare which one will work best.

Once you know how much material you need for one winding, be guided in the length of the fishing line for the next purchases, so that there are no pieces too short for winding.

To replace the fishing line on a mechanical mower with your own hands, you need to disassemble the mowing head and take out the spool, on which the working thread is wound.

How to wind fishing line onto the grass trimmer reel correctly

Many people, having exhausted the factory line on a recently purchased trimmer, try to wind a new one, but can not, as they do not know how to correctly wind the line on the spool (bobbin) trimmer for grass. It seems that there are instructions, and still it does not work. In this article we will try to solve this problem.

So, to wind the fishing line, you need, first of all, to take off the spool from the grass trimmer so it will be more convenient. The method of removal will depend on the type of trimmer for grass.

What kind of line is better for grass trimmer?? How to wind fishing line on a brushcutter reel?

With the grass trimmer perform lawn mowing and clearing various areas of excess vegetation. The equipment is suitable for household and professional use. Electric grass trimmers work with a fishing line and a blade. Before buying a grass trimmer, all the components of the device are evaluated, including the choice of fishing line.

Wrapping up the instructions

Usually the process of replacing the fishing line on the trimmer of a particular model is popularly described by the accompanying documentation. Another issue is that this documentation often comes in a foreign language, as notorious lawnmowers are, for the most part, imported products.

Meanwhile, there is a much simpler, more economical and beneficial to human health and nature. tidying up the lawn with an ordinary peasant scythe. The blade of the grass trimmer:

which is further accompanied by abundantly growing greenery, and not the formation of dead wood as a result of the grass trimmer.

Related Posts

| Denial of responsibility | Contacts |RSS