How to use a trimmer for grass correctly. How to mow high grass?

What is a trimmer for shaving grass and how to use it

A trimmer for grass for an intimate zone is a device that allows you to get rid of unwanted vegetation and maintain the beauty of the body. The device is also used to create intimate haircuts. There are many trimmers for hair removal, characterized by their technical characteristics, size, moisture resistance. Because of this, the choice of a suitable device may drag on. To find out how to choose a trimmer for grass for depilation of the bikini area, you need to familiarize yourself with the advantages and types of modern devices.

What is a trimmer for grass for depilation. many men and women ask this question. A trimmer for grass for the inguinal zone is a small tool that is used to get rid of unwanted hairs. The algorithm for the operation of such devices is similar in principle with ordinary hair cutting machines that are used to obtain short haircuts. Their main difference in the more expanded functionality of the trimmer for grass. It allows you to cut the hairs closer to the skin and not injure it, do not lead to the development of irritations and dryness.

Gasoline braid device device

The weight of the entire device is about 8 kg, which is quite difficult to hold on the hands. Therefore, the unloading belt-rug belt with a protective pad and regulators is included with the scope of the scythe.

The grass braid is designed for mowing grass and small shrub in personal plots.

As you know, grass can be mowed in different ways. folding it in rolls or simply rolling it out. In addition, the grass is different. soft or rough, with thick stems, shrub.

How to fix a disk or a fishing line for a trimmer on a trimmer

The cutting mill is attached to the executive organ. The mounting location is called a gearbox. It is not difficult to cope with the task of installing a disk or coil. The principle of consolidating cutting discs on the trimmer is as follows:

  • The figured washer is originally fixed by using a hexagonal key
  • On the shaft set the disk
  • Then install the upper washer, and then tighten it by means of the fastener
  • It is necessary to rotate the nut through a special end key, which is usually equipped with each tool
  • The rotation of the nut is carried out in the direction counterclockwise
  • When rotating, it is necessary to jam the shaft with a hexagonal key

In the opposite sequence, the disk on the trimmer is removed and replaced. details on how to install a coil with a fishing line on a lawn mower is described in this material.

See also  How to wind the grass trimmer reel correctly

Eyebrow correction technique

Brows require regular and neat correction. Unlike tweezers or blades, a trimmer can trim the form or adjust the length of the hairs fast, safe, and most importantly. efficiently.

How To Have CLEAN EDGES in a LAWN. Trimmer SECRETS Revealed

To correct the eyebrows, you need to prepare all the necessary nozzles: to remove excess hairs and for cutting too long. All metal blades are treated with special oil. In addition to the trimmer for the grass, other eyebrow accessories will be needed:

  • Pinzet. with it, you need to remove all the hairs that cannot be captured by a trimmer;
  • Pencil. they identify the shape of the eyebrows so as not to work “blind”;
  • Brush-shaped eyebrow.

Before proceeding with correction, with a pencil draw the desired shape of the eyebrows. If the experience is not enough, it is recommended to make a small “stock” and increase the distance by 1-2 mm. After an inaccurate movement, the form can be fixed without harm to the appearance.

Eyebrow design is carried out in two stages: haircut and form correction. instructions, how to cut his eyebrows with a trimmer:

  • install a haircut nozzle;
  • Comb the hairs up and trim those that protrude beyond the upper fishing line for a growth trimmer;
  • Comb the hairs down and repeat the procedure. cut off all the hairs protruding behind the lower fishing line for a growth trimmer;
  • Comb the eyebrows along the line of natural growth and cut all the hairs that are selected for the designated area or spoil the shape. instructions on how to equal the shape of the eyebrows with a trimmer:

  • install a razor nozzle;
  • Draw the skin slightly and shake the hairs without going behind the outline outlined by the pencil;
  • All movements should be smooth and neat, the blade is moved against hair growth;
  • Cut hairs are removed with a brush, then, if unprocessed areas remain, the procedure should be repeated;
  • At the end, a nutritious cream or a forming gel is applied on the eyebrows to give the hairs the right direction.


Electric trimmer for grass. a good country option. In this category, two types of trimmers can be distinguished: network, battery. In terms of power, they are inferior to gasoline, but suitable for mowing a small household territory, cleaning paths, flower beds.

Network models are more productive and powerful. With their help, you can mow grass for several hours. At the same time, make sure that the device does not overheat, take breaks. The only drawback of a trimmer for grass is attachment to electricity.

Electric trimmer for grass

The people are called “Elektokos” this type of mowal. She also puts on her shoulder with a belt and is very easy to operate.

The device of the device

The electric mower differs from the motorcycles of the drive used in it, namely, the electric motor installed on it. Below is a scheme on which all the main components of the unit are clearly visible.

Such units differ in less weight than gasoline analogues, and one button (VKL/Off) is used to control, which can stop using the lock button if long.term operation of the unit is required.

See also  How to refill a trimmer line in a grass trimmer

Electric trimmers for grass can be produced with different engine location.

  • The motor is located in the upper part of the unit. This location of the drive is used in devices, the power of which can reach 1.4 kW. Thanks to this, high grass, including wet, as well as small shrubs with thin stems, are easily cut off. Typically, the Electric Clotes includes a fishing line for a trimmer and a metal knife.
  • Motor at the bottom of the unit. With this location of the motor, the mechanical part of the apparatus is significantly unloaded, since the use of the gearbox and shaft transmitting rotation from the engine is not required. The cutting node is installed directly on the spindle of the electric motor, which increases the reliability of this design.
trimmer, grass, high

But still, this structure of the unit with the absence of a gearbox affects the speed of the cutting tool. Due to insufficiently high speeds, such an unit can be mowed only young and not very thick grass.

There are also battery models of trimmers. But these devices are not able to work for a long time, and besides, they are low.power (used only for grass, not very thick and young). Since the battery needs a periodic recharge, you need to have a spare battery to more efficiently use the unit.

Battery trimmers are often used due to their noiselessness and mobility, in places where units that produce a lot of noise, for example, in hospitals, holiday houses and hotels, cannot be used. It is also very convenient to use them for haircuts of grass in places and when performing work on the ground with various obstacles. elements of landscape design, where an electric cable would interfere with movement.

Principle of operation

The principle of operation of an electric trimmer for grass is its simplicity:

  • The power cable is connected to a 220V outlet using an electric fork (it is very important that the outlet has grounding);
  • The “VCL” or “Start” button is pressed on the engine housing;
  • After the engine is launched, the rotational movement from its rotor is transmitted to the gearbox by means of a flexible or hard shaft built into the post (exceptions are units with the lower engine location);
  • The device is ready to work after reaching the maximum speed.

Electric trimmers for grass have some restrictions on the use of electric motor in them: you can not carry out work in raw weather, mow wet grass from dew or rain. This rule refers to the units with the lower engine location.

Preparation of the fuel mixture

To provide the tool with productive operation, it is important to learn how to prepare the fuel mixture. If your trimmer for grass is equipped with a 4-stroke engine, then with the preparation of combustible liquid you can not bother, since such units work on gasoline, and the oil is poured into a separate container. The fuel-oil mixture is used for flooding in trimmers for grass with 2-stroke engines. To prepare it, you need only 2 components:

Mix the liquids in the ratio specified in the operation manual. It also contains information about what fuel and oil are recommended to use.

See also  Which grass trimmers shave to zero

Important! In no case should you use a spent car oil. For gasoline trimmers, there are special lubricants of a special consistency and composition.

Prepare such an amount of fuel mixture so that you manage to develop in one cycle, because when stored the oil is precipitated, fuel loses its properties and becomes unsuitable for further use.

The duration of the mowing

An electric mower can work without a break for no more than 20 minutes, after which it will take the same amount of time to relax. The motor needs to cool so that the plastic parts do not melt.

trimmer, grass, high

Gasoline trimmers for grass allow longer operation. On average, you can work up to 40-60 minutes, or until the fuel ends. In any case, the break should not be less than ten minutes, but better if all twenty. The case here is in the engine itself, which is deprived of natural cooling system for the ICE using liquid. To avoid overheating and increased wear, it is better to give the device the ability to cool down, and at the same time restore your strength or collect already beveled grass.

How to Use a String Trimmer. 10 Skills to Master

How to extend the service life of a trimmer for grass?

First select a good tool. Trust the products of well.known brands, consider Комментарии и мнения владельцев and specialists’ advice. Companies such as Husqvarna, Huter, STIHL produce reliable equipment for the garden, cottage, personal plot (chainsaws, lawn mowers, blacksmiths, etc.). A wide range is presented on the website of the Technosades online store. In the telephone mode, you can get answers to all questions regarding the choice and ordering of equipment.

Trimmer for grass for grass will work for a long time if the user complies with the operating rules. Consider the main recommendations.

trimmer, grass, high
  • In front of each launch, inspect the working nodes, check their performance, reliability of fasteners.
  • Do not forget to use personal protective equipment. Close your ears with headphones, put your glasses.
  • At the first launch. a small load. Take a run in. The next time you can add speed.
  • Take breaks every 15-20 minutes, this will help protect the engine from overheating and premature failure.
  • Make sure that during the mowing the trimmer for the grass does not fall, does not hit hard objects.
  • Use a suitable trimmer fishing line. It can be ordinary, reinforced, twisted. Each variety has its own strengths and weaknesses.

Consider the features of the trimmer for the grass, select good consumables for it. For storing the tool, a room closed from moisture is suitable with an optimal level of humidity and a comfortable temperature. The harder you relate to garden technology, the more effective and longer it will mow your site.

Related Posts

| Denial of responsibility | Contacts |RSS