How to tuck the reel on a grass trimmer. Coil with one working bar

How to correctly wind the line for the trimmer on the grass trimmer: a step-by-step guide and video instructions

A beautiful lawn will only look truly well-maintained if the grass is regularly mowed. The grass trimmer is best suited for difficult terrain. Any owner of the unit sooner or later will face the problem of how to wind the line for the trimmer on the spool, because from the wrong actions can not only worsen the quality of mowing, but also to withdraw the equipment from failure. Today in the review Homius we will tell you about all the ways and nuances of replacing the fishing line and the peculiarities of the choice of consumable material.

The grass trimmer is suitable for mowing small or difficult areas, such as near hedges, between beds, and along paths. Today, manufacturers produce a large variety of gasoline, electric and battery-powered models, which can be selected according to any requirements of the owners.

As the cutting element of the grass trimmer, a line for the trimmer is used. In the process of work, sooner or later its length will end, and then the owner will face the question of how to properly replace and secure the thread, tucked into a removable spool.

How to wind a line for a trimmer on a grass trimmer

Types of trimmer heads

  • Automatic. The filament feed is performed after the user has lowered the engine speed. Although automatic line feeding is convenient, if you perform a large amount of work, but such bobbins have one drawback. a large consumption of thread.
  • Semi-automatic. This type of head does not require the user to perform complex manipulations. The way they work is that the filament is extended automatically while the machine is running at full speed. It is enough to slightly knock the grass trimmer head on the ground (this removes the cord lock), and the line for the trimmer thanks to the centrifugal force is pulled out of the bobbin, after which it is cut to the desired length by the knife, located on the protective guard.
  • Manual. The filament is lengthened by stopping the machine and pulling out the filament for the trimmer by hand.

Based on the above, semi-automatic bobbins are the best option. You should also take into account that grass trimmer reels can be one-string (used only for grass mowing) and two-string that are used for mowing high grass and small, with thin stems of bushes.

How to wind the line for the trimmer on the reel of the trimmer for grass Patriot?

Almost every beginner faces the problem of changing lines when using a grass trimmer. Despite the fact that changing the fishing line for a trimmer is very easy, you need to learn how to do it correctly. Changing a fishing line with the proper skill will not take more than five minutes. just practice it all the time. This article will review the replacement of fishing line on the example of trimmers Patriot.

See also  How many meters of line go into the reel of the grass trimmer

How to remove the reel from a grass trimmer and remove the line for the trimmer

Initially, before you tuck the line for the trimmer into the grass trimmer reel, you need to take it out of there. A reel or spool is a device inside a mowing head, spool or reel. There are different kinds of heads (depending on the manufacturers), but the principle of changing the line on the spool is the same in all. The first thing to understand is how to remove the head from the tool, as well as how to get the drum with the fishing line out of it.

This is interesting! Changing the tooling can be done directly on the tool, but if doing it for the first time, it is still recommended to remove the head, and learn the detailed process of winding. Once you have mastered the technology, you can do the replacement work on the trimmer trimmer or gasoline mower.

The instructions on how to unwind the manual head on the trimmer are as follows:

  • Turn the tool upside down, and if necessary, clean it of dirt. Grasp the cover catches (on the mowing head) symmetrically with two fingers of one hand. After gently pressing them in, remove the protective cap from the drum
  • Next, you should remove the fishing line spool from the drum shaft. The hedge trimmer has no mounts on the shaft, so you can remove it with one hand
  • The main part of the drum is fixed by means of a screw, which must be unscrewed with a screwdriver with a suitable tip or a bit
  • To unscrew, hold the base of the drum with one hand and unscrew in counterclockwise direction with the screwdriver with the other hand
  • After that you can proceed to the dismantling. To do this, do not pull it with all your might, but rocking it slightly sideways, slowly disengage it from the metal shaft on which the drum is seated
  • When reinstalling it, the head should fit into the slits of the square shape

This process is not difficult, and as you understand, there is no need to dismantle the entire head, if you know how to perform the replacement. Be aware of these nuances when disassembling:

  • Periodic removal of the head is recommended to prevent corrosion of the threaded joint. If the screw is never unscrewed, it can be difficult, if not impossible, to do so if necessary
  • If the screw has a tetrahedral boring of the head, then to unscrew it, you should pick up a screwdriver or bits of the appropriate size to avoid slipping edges on the head
  • When reassembling the unit, the threaded seating should be treated with a lubricant, such as solidol or machine oil
  • If the facets on the screw have slipped off, you can use special clamping pliers to unscrew it
  • There are reels that do not require prior disassembly. To disassemble them, you should take hold of it, and rotate it in the opposite direction of the clockwise direction

Knowing how to disassemble the drum, you should continue to figure out the process of replacing the grass trimmer line. The video below shows a detailed process of how to open the grass trimmer reel and disassemble it.

See also  What is a good trimmer line for grass trimmer

Block: 3/8 | characters: 2920

How to insert a line into a grass trimmer?

Filling the mowing reel with cutting filament for grass trimmer. an activity not difficult, but beginners gardeners will have to practice a little to be able to quickly insert the cord into the available household grass trimmer in the future.

In total, there are several ways of threading the grass trimmer mowing head. The first method is the easiest, and will work well for beginner gardeners.

In this case, the cord is inserted into the bobbin in this sequence:

  • First you will need to reel off the total spool of about 6 m of line for grass trimmer, then cut the resulting section in half. The result should be two strands, each 3 m long;
  • Then at one end of the first segment will need to make a kind of hook, and insert it into one of the through holes located at the top of the bobbin;
  • Next, you need to start winding the line on the bobbin in the direction indicated by the arrow. During winding, you need to make sure that the line for the trimmer lies evenly on the surface of the bobbin, and does not go beyond its upper section. It is not necessary to wind the segment to the end, about 15 cm of thread should remain in the hands;
  • The remaining loose end of the wound cord will need to be inserted into one of the notches located at the top of the bobbin;
  • Next, do the same procedure with the second piece of fishing line. This will be wound onto the lower section of the bobbin;
  • As in the first case, winding the line for the trimmer on the lower section to the end is not necessary. The remaining piece of fishing line will be inserted into the second notch on the bobbin.

After this operation, the reel will need to be installed on the grass trimmer and start it. To check the reliability of the thread attachment, you need to press the throttle lever all the way down, so that the engine reaches maximum revolutions. If the trimmer line doesn’t fly out of the head, it means the trimmer line is held securely and won’t fly out of the mowing reel while cutting the grass.

Advantages of trimmer head

In addition to the heads on the trimmers used metal discs. In comparison with them, cutting elements with a fishing line have a number of advantages:

  • no need to sharpen consumables
  • if stones or other hard objects hit the trimmer line will simply rip, not injure others or the mower
  • thread breaks do not adversely affect gears and motors of trimmers.
  • the machines with mowing heads clean the grass better than their metal counterparts.

Grass trimmer reel design

Mowing heads for trimmers come in a variety of designs, both simple and complex. The picture below shows a semi-automatic trimmer head from a Husqvarna brushcutter (Husqvarna) disassembled.

This type of head is included with most gasoline mowers and electric trimmers such as STIHL (STIHL), Patriot (Patriot), Champion (Champion), Bosch (Bosch), Huter (Huter) and others. The design of mowing head is simple enough. It consists of the following parts:

  • the base of the mowing head;
  • button for semi-automatic filing of the cord;
  • bobbin (spool), in which the line for the trimmer is threaded;
  • spring;
  • eyelets. through them the line for the trimmer goes out;
  • trimmer head cover;
  • line for trimmer (cord).
See also  How to sharpen a metal drill bit with a lathe

There are also simpler trimmer heads, shown in the following photo.

All these attachments do not allow you to change the length of the line in semi-automatic mode (after pressing the button). If the cord breaks, you have to stop the mower and change it manually.

Tips and recommendations on how to trimmer lines and what you need to know

There are some useful tips and recommendations that will be useful to learn not only for beginners, but also for the experienced masters of mowing. These tips will help prevent negative consequences in the form of injuries and malfunctioning of the mechanism. These recommendations state the following:

  • It is necessary to install the cover until it clicks. And it is 2 or more clicks, which depends on the number of clips. If one latch does not catch, the drum can jump out when you start the tool and injure a person
  • Do not wind the line for the trimmer with a strong retraction, as well as in an amount greater than you can put it in place. It is better not to wind up the fishing line than there is more of it, as this will lead to negative consequences in the form of the inability to unwind it if necessary
  • If you own the tool not with two line outputs, but with one (usually these are low-powered units), then the winding process is carried out in a similar sequence as described above, only with the difference in the absence of the middle curb between the extreme bases of the spool
  • After replacing the material, you must first check that the tool is working properly and then start mowing the grass. If you do not check it beforehand, the scaffolding could uncoil and injure a person

This is of interest!Choose the correct material to avoid injury when working with chain saws, trimmers and brushcutters. Small stones and other materials can fall under the rotating parts while mowing, and these materials can fly off over long distances. Therefore, even though a line for a trimmer is not a knife, you should wear special protective outfit when working with the tool. The result of the work done is the following. after the replacement of the new material carried out, the usual material is enough for an area of up to 600 square meters, but taking into account the presence of a reinforcing layer on the fishing line. Conventional nylon materials do not last as long, which is important to consider when working. Do not attempt to mow thick stemmed grass with a fishing line, as special metal discs or blades are available for this purpose.

Related Posts

| Denial of responsibility | Contacts |RSS