How to store a gasoline trimmer for grass correctly. How to prepare a trimmer for the grass for winter

Is it possible to store a trimmer for the grass vertically

Autonomous gasoline trimmer for grass with a translucent fuel tank, allowing you to watch the amount of work water Snutri.

The model provides a comfortable handle, a reliable and powerful 2-stroke motor with a vibration dumping system, also a protective casing that protects against pebbles and garbage.

From special options, a gas trim lock, anti.vibration systems of a trimmer for grass and not poor equipment are released.

As fuel, AI-92 gasoline is used, which is mixed with oil in a ratio of 1 to 40.

  • bevel width, cm. 25.5;
  • rotation speed, rpm. up to 9500;
  • Motor volume, cube. cm. 52;
  • power, kW / l.C. 2.9/3.9;
  • Fuel tank, l. 1.2;
  • pen / bar-T-shaped / flat;
  • weight. 7 kg;
  • Producer Country-China (brand-Germany).

A protective casing, a coil with a fishing line, a cutting disk, a random belt, a set of keys and protective glasses come into a complete set with a trimmer. The price of the device is 11,000 r.

  • The highest quality of devices and assembly.
  • Good performance that is enough for home / cottage.
  • Ease of mowing grass at least some height.
  • The presence of a huge disk with winning tips included.
  • Compaurantly small dimensions.
  • Comfortable charging fishing line.
  • Undemanding and reliable engine engine.
  • Clear bar.
  • Visual control of the level of fuel.
  • Reliable security system.
  • Weak coil for fishing line.
  • Repeated difficulties with launching a cool.
  • Tangible vibration during operation.
  • Low quality of materials on certain nodes.

Huter GGT-2900S-a model with a reliable internal combustion engine, a comfortable folding handle and a thoughtful location of the motor.

The presence of a shoulder belt is comparable to small weight and the anti.vibration system allows you to work for a long time without lethargy in hands. It is not breathtaking that the model is in 13th place in our rating.

General rules for conservation of technology

Any tool, regardless of the type and purpose, before laying on storage, you need to wash, dry and inspect the details for wear and replacement. There is nothing worse than moisture that fell into mobile or vulnerable details and mechanisms. Freezing in an unheated room, it turns into ice and damages the elements of the system. It is also advisable to drain gas tank gasoline for fire safety reasons. But for the clock, other recommendations. the equipment cannot be left “dry”, so the oil is not removed for the winter, but they are changed.

When stored, fold the equipment as indicated in the operating manual

Preparation Motokos for the season

Fuel preparation. At the first refueling, motorcycles are recommended to add a stabilizing additive to gasoline. If the unit is equipped with a 2-stroke engine, carefully prepare the mixture in the specified proportions. The supply of finished fuel should not exceed the monthly need, otherwise the liquid will lose its properties.

Preparation of the engine. After conservation, it is necessary to replace the spark plug. Clean the air filter and adjust the carburetor. Motokosa service will call to reduce fuel consumption. If a 4-stroke engine is installed on the trimmer, check the level and condition of the engine oil. When replacing lubrication, change the oil filter at the same time.

If you have a gasoline trimmer for grass, then at the first launch, let it work without load for 3-5 minutes. During this time, the oil is evenly distributed in the system, the details will fit together, the motor will begin to work stably.

Electric network and batteries are checked only for lubrication. The battery must be charged, and the cord is lengthened if there is a need.

Preparation of fishing line. The materials from which the fishing line for the trimmer is made is poorly tolerate temperature and humidity drops, so it is recommended to store this element in a dense bag with the addition of water. In the process of preparing a trimmer for grass for the season, soak the part in the water for several days. This will make a fishing line for a trimmer more elastic, eliminate fragility.

Preparation of nozzles. Nozzles must be cleaned, lubricated, examined for the presence of cracks, other defects. The cutting organs are pulled.

How to store a lawn mower in winter

This unit is sent for “well.deserved rest” back in the fall, and is extracted closer to the end of spring. Due to such a long “downtime” the requirements for the conservation of lawn mowers are very high.

Gasoline lawn mower

The main elements have a benzogazonocoster. this is an engine and cutting parts. They should pay maximum attention:

  • The first condition for the correct storage is a room with a humidity of not more than 70%, as well as the absence of sharp temperature changes that increase humidity;
  • If you worked a lot of a mower, particles of grass, and with them moisture could get to the internal parts of the device. Therefore, be sure to wash, clean and dry the knives and other details in the reach. Remove the remaining grass from the body, exhaust pipe, engine cooling radiators, etc.D.;
  • Opinions were divided by the fuel. Some of the summer residents drain its remnants and wrapps the gas tank dry so that condensation does not form during the winter. The other half, on the contrary, fills the tank to the edges and leaves for the winter in this form. However, in this case, poor.quality gasoline can give a precipitate, which makes it difficult to launch the engine in the spring. It is still easier to remove the remaining fluids from the carburetor than to clean it from plaque and sediment, so we recommend the first option;
  • Inspect the cutting knife. does it require repair and sharpening. In any case, remove and imprison it for the winter. If necessary, consult a specialist;
  • The oil level should comply with the recommendations of the instructions for operating (for 4-stroke engines);
  • Keep the lawn mower so that its wheels do not contact with the floor, or in a suspended position, or on stands.
See also  What's the right oil for a gasoline trimmer?

Electric lawn mower

Before cleaning the unit for the winter, check the integrity of all contacts and inspect them for oxidation and rust. The rest of the electric motor does not require any special conservation measures. Rub the battery for the winter, clean the case, deck and knives from the grass and, if necessary, imprison them.

Sprayers

Hoses, pistols for irrigation, droppers and other inventory for irrigation must be free from water residues. Ordinary hoses should not be left on the street: at minus temperatures, water will turn into ice. so the hose can become unusable. To preserve sprayers for the winter, you need:

inspect all the mechanisms and check if there are tights of hoses, cliffs and damage to the spray houses;

Check the quality of the oil: it should not contain extraneous fluids and impurities;

Clean or replace all filters with new ones. in the houses of sprayers, pressure and absorbing.

For the winter, sprayers should be brought into a dry warm room.

How to store garden equipment in winter (infographics)

Before putting a garden and surgery for winter storage, you need to carefully prepare it-to preserve it. The more difficult the device, the more attention it will require. We have compiled you the optimal conservation algorithm for you.

At the end of the season, the “heavy” garden equipment goes for storage until the next spring. Often it is simply driven into the barn or closed in the house, slightly wiping with a rag. If you have not prepared the technique for wintering, in the spring it may not start, because it is simple in the conditions of a change in temperature and humidity modes. a serious test for mechanisms. This applies to a greater extent to the gas instrument, it must be treated especially carefully. And although comprehensive recommendations are usually given in the operation manual, we recall the basic rules for storing garden equipment.

General rules for conservation of technology

Any tool, regardless of the type and purpose, before laying on storage, you need to wash, dry and inspect the details for wear and replacement. There is nothing worse than moisture that fell into mobile or vulnerable details and mechanisms. Freezing in an unheated room, it turns into ice and damages the elements of the system. It is also advisable to drain gas tank gasoline for fire safety reasons. But for the clock, other recommendations. the equipment cannot be left “dry”, so the oil is not removed for the winter, but they are changed.

alt = “The lawn mower in the storage” width = “460 ″ Height =” 345 ″ /

When stored, fold the equipment as indicated in the operating manual

The cutting parts (such as lawnmand knives) should be sharpened, and hinged joints should be cleaned of dust and dirt and grease. Check the condition of the fasteners and power cord of the power tool, if necessary, replace them without leaving until spring. Next, we consider each type of technique and the requirements for its conservation in more detail.

How to store a chainsaw in winter

This is perhaps one of the few tools for which there is work in the cold season. True, the range of operating temperatures of the chainsaw is usually small due to the fact that it contains insistent parts, gas and oil. If the manufacturer guarantees the operation of the tool at a temperature of –10 ° C is a very good indicator, and such a saw can be used almost all year round. If you leave the summer cottage for a long time, then take care of proper conservation.

alt = »chainsaws how to store» width = “460 ″ Height =” 355 ″ /

The “heart” of any chainsaw is a single.cylinder two.stroke carburetor engine. Another important element is the chain. It is the care of these two elements that most of the recommendations for conservation are devoted to:

  • First of all, drain the remains of fuel from the tank, carburetor and oil for lubrication of the chain. For full production of fuel, you can start the chainsaw of an idle and wait until the gasoline is over. After that, wipe the gas tank dry so that it does not begin to rust. This is an option for prolonged conservation, at least 3 months. But there is a second option for those who are falling the forest or carrying out other works in winter. In this case, the tank is advised to fill with high.quality gasoline to the edges and leave for storage in this state. If you urgently need to cut down a tree. excellent, you have a completely finished technique at hand. But remember, gasoline, which after 2-3 frosty winter weeks in consistency will begin to resemble jelly, can even be disable; even a first-class motor;
  • Using a wire probe or homemade nozzle, remove filter-endor filters from the fuel and oil tanks. Rinse them and set them back after drying or, if necessary, replace with new. Do the same with an air filter;
  • Remove the saw chain and tire and clean them of the remains of sawdust, wood and dirt;
  • Remove the clutch cover, thoroughly rinse it under a stream of warm water and let it dry. Lubricate the worm gear and screw of the side tension system of the chain;
  • Remove the spark plug and clean it from soot and fuel residues. Pour 5-7 ml of motor oil into the candle hole and cranceize the engine for 3-4 revolutions so that the oil is distributed according to the connecting rod mechanisms and the cylinder-piston group. Leave the piston at the top (in the raised state). After that, set the candle in place, but do not put on the ignition terminal;
  • Cover the saw tire and chain with protective lubricant and store wrapped in a piece of paper or fabric impregnated with oil;
  • pack the tool and hide the removed parts into a dry, dark and nonsense place.
store, gasoline, trimmer, grass

About once a month, perform the crankshaft to update the lubricant on the connecting rods and in the cylinders with the pistons.

See also  How to make a starter motor on a trimmer

If you have an electric drain, then all you need to conservation is to lubricate the saw tire and chain with protective grease.

How to store a lawn mower in winter

This unit is sent for “well.deserved rest” in the fall, and is extracted closer to the end of spring. Due to such a long “downtime”, the requirements for the conservation of lawn mowers are very high.

alt = “Lawn mowed how to store” width = “460 ″ Height =” 322 ″ /

Gasoline lawn mower

store, gasoline, trimmer, grass

The main elements have a benzogazonocoster. this is an engine and cutting parts. They should pay maximum attention:

  • The first condition for the correct storage is a room with a humidity of not more than 70%, as well as the absence of sharp temperature changes that increase humidity;
  • If you worked a lot of a mower, particles of grass, and with them moisture could get to the internal parts of the device. Therefore, be sure to wash, clean and dry the knives and other details in the reach. Remove the remaining grass from the body, exhaust pipe, engine cooling radiators, etc.D.;
  • Opinions were divided by the fuel. Some of the summer residents drain its remnants and wrapps the gas tank dry so that condensation does not form during the winter. The other half, on the contrary, fills the tank to the edges and leaves for the winter in this form. However, in this case, poor.quality gasoline can give a precipitate, which makes it difficult to launch the engine in the spring. It is still easier to remove the remaining fluids from the carburetor than to clean it from plaque and sediment, so we recommend the first option;
  • Inspect the cutting knife. does it require repair and sharpening. In any case, remove and imprison it for the winter. If necessary, consult a specialist;
  • The oil level should comply with the recommendations of the instructions for operating (for 4-stroke engines);
  • Keep the lawn mower so that its wheels do not contact with the floor, or in a suspended position, or on stands.

How to store a cultivator and one.axic tractor in winter

Such “serious” agricultural machines such as cultivators and motoblocks need appropriate care. The abundance of details and a complex device does not always allow you to completely clean the cultivator, and even more so the same tractor from dirt, but try to do it still.

store, gasoline, trimmer, grass
  • The first stage is engine conservation. Drain the gasoline and develop its residues until the engine stops. Remove the oil and replace it with new until the motor has cooled;
  • update a paper air filter or rinse a foam filter with warm water with a detergent. When it dries, soak it with machine oil. Clean the fuel filter;
  • turn out the spark plug, clean it, moisten in gasoline and dry. Pour 15 ml of oil into the cylinder and slowly turn the shaft so that it is distributed in all details. Return the light of the ignition to its place;
  • During the inspection, clean all the nodes, details, elements, engine ribs and muffler from dirt, earth and oil spots. When removing pollution from the gearbox, cutters and other parts, do not use iron scrapers, otherwise damage the protective layer and provoke rust. It is better to take a wooden stick or scapula and rinse the parts under a stream of water. After “water procedures”, wipe everything with a napkin and dry;
  • With a rag moistened in machine oil, treat the mills and the outer surface of the gearbox. Additional nozzles and other metal parts also cover with a protective oil film, wrap in packaging paper and place them in a wooden or plastic box.
See also  Can I cut the acrylic bathtub?

If you use our tips, in the spring you will take out a technique absolutely ready to work from the household, which will greatly simplify the country labor and help to achieve high yields with minimal efforts.

In the case of winter storage of a benzo-tool, it is much more important than the place of placement of the correctly carried out conservation. Often, people leave fuel in the system, and in the spring they cannot start the engine and carry to the very peak of appeals to the service, which is overloaded in the spring. Further quote with Chainsaws-Portal.ru/

Preservation of a lawn mower and a chainsaw before winter storage:

How to Winterize Your Lawn Mower

Get off everything that you need to get a bit (at the same time, you use fuel so that it does not remain for the winter).

Remove the tank plug, turn the lawn mower (chainsaw) and drain all the fuel from the tank into the tank for technical use (a canister or a bottle with a funnel for washing engine parts for maintenance). Get the lawn mower / chainsaw and develop the remains of the fuel from the carburetor until it stalls (if you leave the fuel in the system, then after a while the fuel is delayed and oxides and tarry deposits are formed in the carburetor channels, which will further interfere with the normal operation of the engine).

How to preserve a chainsaw for the winter

Chainsaws. a tool that, unlike many, can be used in winter. At extremely low temperatures, it is not worth using it, but for high.quality chainsaws, the threshold is minus ten degrees.

If you do not plan to use the tool in winter, you should take care of its quality storage, because it has not stable elements for cold.

If in winter you plan to use a saw, then it should be stored with a tanger filled with gasoline (gasoline should be of high quality). The main thing is to remember that after a couple of weeks of persistent frosts, gasoline in the tank will thicken and the use of a saw in this state can disable it. Store the tool in this case is in a warm room.

If you leave a chainsaw for a long wintering, the steps of the preparation should be as follows:

  • It is necessary to clean the tank from fuel. This can be done by draining it, either by starting the work of the saw until full production. Next, to prevent the appearance of rust, the tank must be wiped dry.
  • Filters from fuel and oil tanks need to be removed, cleaned and dried or replaced with new ones, if necessary. A similar operation with an air filter.
  • The chain needs to be cleaned from the remaining waste of saw. After the chain, you need to lubricate and wrap the elements into the fabric, which was previously impregnated with oil. We store the details separately.
  • Store a saw in a dark room without dust and with low humidity.

The main details that need to be paid attention to in preparation for winter conservation. the engine and chain.

Where to store: options and necessary conditions

Sarai or equipped housekeeping block is on the house territory of almost every summer resident. These storage places are the most common. The main conditions for storage of gas technicics in sheds or utility rooms are low humidity and stable temperature without sharp jumps.If the room is insulated, it will be an additional plus.

Another place for storing benzotechnics is a garage. Do not place the equipment close to the car, and also, by suspending it, you need to make sure that in the event of a fall it will not touch the car.

How to Select the Right Trimmer or Brushcutter

This method is not very popular in Russia and the countries of the post.Soviet space. But if there are no other options, find the company that provides these services is possible.

What you should pay attention to:

Related Posts

| Denial of responsibility | Contacts |RSS