How to start a trimmer for grass with a gasoline. We refuel the fuel tank

What you need to know before using a new lawn mower

The question is how to start a trimmer for grass if a trimmer for grass does not start or does not start to arise if the engine of a gasoline trimmer for the grass is worn out, unresolved, or when a lot of fuel has got into the combustion chamber due to violation of the engine (when the engine was “sucked” ). To help the engine to start, you can pour a little fuel through the candle hole into the cylinder. To do this, it is better to use a special starting liquid, but you can also conventional fuel from the tank of the starting trimmer for grass or lawn mower.

Garden. Petrol Products Support Video

Checking the gearbox before starting a gasoline trimmer for grass must be created on a permanent base. The lack of lubricant or its small amount increases the friction of the gear transmission of a gearbox that works at fairly large speeds. The result is overheating and gears. Motokosa gearbox fails. To prevent the appearance of such a breakdown during use and is helped by constant inspection.

If, before the start of a gasoline braid for grass, the missing amount of lubrication in the gearbox or its absence, Litol is laid in the case. To do this, you need to unscrew the screw on the gear housing and pace the “lilest” in the amount of 1-2 ml.

Working with a gasoline trimmer for a long time, every 8-10 mothers add grease to the gearbox of the bar.

Prepare a gas station. fuel mixture

When starting the device after the winter season, or by staying in a cold room, you need to check the tank for the availability of the residues of the gas station. When finding residues, it is necessary to drain the mixture.

Features of the refueling procedure:

  • The gas station can be, both in finished form and a mixture for independent preparation.
  • When refueling four.stroke engines, you do not need to prepare the fuel mixture.
  • Devices interact better with oils that have the SAE-30 index.
  • It is not recommended to change synthetic oil with mineral and vice versa.
  • Chinese, Japanese, American gasoline lawn mower works better on A-92 fuel. European models perceive large octane numbers well.
  • Be sure to track the level of the mixture, the best option is 2-3 centimeters lower than the edge of the fuel tanks.

The reasons why the lawn mower may not start

No matter what technique asks for careful business and compliance with the rules of operation. As if working when checking in a store, a tool after delivery to a house or several days of operation did not start. Before contacting the service center, you can try to solve the case without the help of others. The prerequisites for the malfunction in gasoline and electronic lawn mowers are various.

A gasoline lawn mower may not start for subsequent reasons:

  • First, before starting the engine, you need to check the fuel in the tank. A small amount of its dummy will create a dummy of the system, but it is also impossible to fill the tank to the edges. When refueling, you need to adhere to the mark of the highest level of fuel. If the lawn mower sets up for winter storage, fuel must be drained, because gasoline has the ability to evaporate. Refueling fuel is done using a funnel. Before drying, the case of spilled gasoline on the parts of the mowing mowal cannot be started, in order to avoid ignition of combustible water.
  • Often the engine of the lawn mower does not start due to the fact that the user does not know how to start it correctly. Before launching the lever, maximum speed is set, and then the primer is pumped up with gasoline in the carburetor. The starter cord is smoothly pulled a little on themselves, and then dragged sharply.
  • After failed attempts to start the engine, you can try to change the spark plug. Often the reason lies in it. If there is no spare candle at hand, and the old one is covered with a strong soil, it must be cleaned with fine.grained sandpaper paper.
  • The clogging of the air filter leads to the preparation of a poor.quality fuel mixture, and the engine begins to stall or, in general, does not start. Fix the problem easily washing the extracted filter in pure gasoline, followed by its drying in the air. Air filters must be washed every 25 hours of work, even if the lawn mower does not stall.
  • Immediately after starting, the engine may stall due to a jerked piston or knee shaft. Having unscrewed the spark plug with the starter cord, you need to pump the engine several times. Perhaps moving details are developed, and the malfunction will be eliminated.
  • The low level of oil in the crankcase can cause the engine not starting.
See also  How to trim a tile on the wall. Manual tile cutter

Chainsaw devices and two.stroke engines

By design, all models of modern chainsaws are a mechanism launched by an internal combustion engine. This is usually a single.cylinder two.stroke option, in which there is no classic gearbox. Its function is performed using a single.stage chain transmission, which controls the vacuumber. The main components of the chainsaw structures:

  • Membrane carburetor;
  • Ignition;
  • Fuel system;
  • Starter;
  • Air purification unit;
  • Chain and tire;
  • Chain brake (contact and inertial);
  • Tension mechanism;
  • Lubrication system.

External chainsaw devices

The chainsaws are equipped with a centrifugal clutch, which automatically works depending on the engine speed. With sufficient power, special elements are pressed against the inside of the drum, moving the leading star. The advantage of this mechanism is that when the saw is stuck in the context, the clutch begins to slide, reducing the risk of failure of internal mechanisms.

How to choose a quality device

A large selection of modern models is offered today by the garden equipment market. Constructive and operational advantages of various models with mulching with a high rating can be evaluated by users. Which lawn mower is better. gasoline or electric? Professionals help to make a review of models. The service life of the equipment, the performance of the units largely depend on the brand, so it is better to study in advance the rating of manufacturers of such units.

It is especially important to pay attention to the engine. Its power and width should be chosen depending on how many lawns to be treated. When making your choice, it is necessary to make a review of the models in the market. The catalog of units of various types is presented in each salon. It is important to accurately assess the size of the site, the volume of work. The time of continuous operation depends on the power of the unit and the volume of the tank for the fuel mixture. The grass collector is easier to wash than mulching equipment. Such a device has a high rating, it will not rust in raw weather.

An important component of work with the unit is security. Increased maneuverability is characteristic of a gas mowing with mulching, which has a motor behind. You can significantly reduce the effects of vibrations on hand, making a choice of a model in which control handles are equipped with a soft coating. Homemade gasoline machine will help to solve the problem.

Directly about work

Now a few words about the process of operation of the lawn mowers, more precisely, about some of their features in this regard.

Depending on how the height of mowing grass is adjustable for each of the devices, they can be divided into several types:

Lawn mowers with a screw.shaped adjustment are cheaper; The indicated type of adjustment is presented in the form of several holes that are different in height, where the axis with the wheels is rearranged, for configuration of the height of the bevel;

Safety when working with a lawn mower

See also  The grass trimmer carburetor does not receive gasoline causes

All law mmores move in different ways, this is explained by the difference in drives

Thinking about how to choose a gasoline self.propelled gun, this nuance must be directed increased attention:

  • If the device is equipped with a front.wheel drive, it will be very maneuverable, but in the process of filling the container for beveled grass, a slip of the front wheels may appear, since the center of mass in this case will be shifted back.
  • The rear.wheel drive is more comfortable, here the main load falls on the rear wheels.

Another moment to which you should direct your attention if you decide on that,

The process of commissioning the lawn mower, no matter you bought it now or got it after winter storage, the rules listed below will allow you to avoid the main errors that may damage the tool. Suppose you just bought a gasoline trimmer for grass. Remove the instructions out of the box and see if all the parts of the lawn mowers that are indicated, you have

After that, you can start in the assembly

Remove the instructions out of the box and see if all the parts of the lawn mowers that are indicated, you have. After that, you can start in the assembly

Suppose you just bought a gasoline trimmer for grass. Remove the instructions out of the box and see if all the parts of the lawn mowers that are indicated, you have. After that, you can start in the assembly.

Preparation of the fuel mixture and refueling

For the convenience of making fuel mixture, it is better to have. where one part contains gasoline, and in the other 2 stroke oil. We recommend getting it like that, it is very convenient to use

Next, take a measured container, with a scale applied to it, with its help you can prepare the mixture as accurately and quickly as possible. Look in the instructions which brand of gasoline and 2-stroke oil are recommended by the manufacturer of your lawn mower model. Pour gasoline and oil into a container for the preparation of the fuel mixture, according to the proportions specified in the instructions. Then the finished mixture neatly, through the funnel, pour the trimmer for the grass into the fuel tank. The ratio of gasoline and oil should be just the same as indicated in the instructions. This is a very important point!

Launching a lawn mower with an unfinished engine

For the first launch of the lawn mower, find the air damper lever and put it in the “closed” position. Turn on the ignition on the handle. If your model has a manual fuel pump, the people are called a suction, then click on it 3-5 times until you see the fuel mixture inside the primer. Now the tool is ready to launch. Put a trimmer for grass on a flat surface to ensure a stable position. Smoothly stretch the trigger cable until you feel its resistance, and then pull the cord with a sharp movement 3-5 times.

If the engine started after 5 jerks, then open the air damper. If this does not happen, still open the air damper (with an open damper and continuation of attempts to start the engine, the fuel flows a candle and you will have to dry it, and this is extra waste).

If the engine does not start, with an open damper, then close it to continue to pull the cord. The first launch may be quite difficult and demand up to 15 jerks. After the engine has begun to work, click once on the gas lever, so you will use idle. Now let the engine work and warm up. After that, it can be stopped by pressing the “Stop” button.

Launch of a heated engine

It is very simple. Put the switch to the working position and pull the cord to the start. If you do everything according to the instructions, then problems with the launch of a good lawn mower should not arise.

Basic errors when starting

We list the main errors that beginners make when starting a gasoline trimmer for grass:

  • starting the engine when the ignition is turned off;
  • starting with a closed shutter with the number of jerks more than 5 times;
  • incorrect fuel mixture.
See also  How to cut duroplimer skirting boards

The result of proper run.in a gasoline trimmer for grass

After you have been running the lawn mower by the instructions, as a result, we get a tool ready to work. Of course, it is best not only to read the stages, but also to see the crowding on the video from specialists. The result of the correct actions will be obtained:

  • trouble.free operation of the benzo tool for a long time;
  • high.quality start of the device and stability of the submitted power;
  • lack of unforeseen repairs of a trimmer for grass after high.quality pounding;
  • Lack of overheating.

In this regard, the primary processing of the Chinese braid for grass is an integral part of the quality work of the device that can work flawlessly using benzos knives or cutting fishing lines of different diameters when processing territories available in the “braid for grass” special store.

Preparation for the first launch of the lawn mower

Before carrying out the first launch of the lawn mower, it is necessary to perform a number of consistent actions:

We recommend that they perform them not only when buying a new trimmer for grass, but also when preparing an old tool for the new season after storage.

Basic rules and techniques when working with a motorcycle

For the merit of not bad cat results, it is also fundamentally correct to operate and care for a motorcycle. Even if you have been holding a motorcycle for the first time, you will master the right Kosba technique rapidly. The device is simply rotated along the semicircle from right to left, with all this evenly moving forward.

Below we will show for you the main technique and certain techniques, with which you can rapidly mow even huge areas and achieve the best results as a kota.

The main technique of kosba is most often used.

Because the cutting tool is spinning counterclockwise, then in working practice the movement of mowing on the right to the left is more often found.The advantage of this method: mowed grass falls on an already mowed surface.

Large, even surfaces. the right reception.

Large even surfaces for you is most perfect to mow in a square way. The area is distributed in squares, then you always work along the outside to the center.

The main technique in the case of high grass.

With a very highest grass or stiff weed grass, it is recommended to mow in both directions of movement: at first you cut off the right part of the mowing weed in one movement, with the oncoming movement (on the left). the lower. Mowed grass and in this case it remains to lie on the left.

Gasoline trimmer. Elmos EPT 26 petrol pump. Unpacking, first look

Along the slope. mowing behind mowing.

You will advance perfectly in the way of direct mowing in particular on the slope: scrape one mowing parallel to the slope, and then return back in a beveled strip. Then mow the subsequent mowing. And then mowed grass always fits on an already mowed surface.

Masterfully bypass obstacles. to bump playlessly.

In order to squint at the trees or shrubs, I do not damage knots or trunks, the cutting thread is most ideal. If many plants are at a small distance from each other, then in front of the kosa is offered a harassment. To do this, use the protection of your motorcycles as a guideline. Always lead it specifically along a wood barrel or shrub, and move around them. The barrel remains protected, the territory around the barrel will be scorched.

How to get a lawn mower?

Start the lawn mower according to this algorithm:

It is not recommended to adjust the carburetor screws on their own, since in most cases they are already in the optimal position. If necessary, you can adjust the screw responsible for the idle course:

Related Posts

| Denial of responsibility | Contacts |RSS