How to secure a suspended ceiling to plasterboard

Bookmark under the stretch ceiling. methods of installation, photo

What is a cage for a stretch ceiling? This is a device that is necessary for the installation of lighting fixtures in this element of the decor. As the headlamps are made for different types of lamps, they can be different, too. There are, for example, universal embeddings for stretch ceilings, serving mainly for the installation of spotlights. There are also homemade devices that are suitable for chandeliers.

Fixing rules for stretch ceilings

Fixation of the canvases is carried out by performing a number of the following actions:

  • The first thing to do is to prepare the base surface.
  • On the walls it is necessary to make a quality marking of the horizon, because it is from it directly depends on the appearance of the future stretch ceiling.
  • Along the perimeter of the surface is required to perform the installation of special mounting profiles designed to fix these ceiling coverings, which can be metal or plastic. The pitch of their attachment reaches 15-20 cm. At the same time you should first make sure that the baguette is securely fastened, because it will have the main load from the structure.
  • In the following stage, the cloth should be suspended from the ceiling surface behind the corners and heated by using a heat gun. You should not resort to heating blades only when they consist of fabric.
  • After installation you need to stretch the cloth as it cools down. In this process you should smooth out any minor irregularities left on the surface.

The last step is to fix the decorative skirting boards around the perimeter of the ceiling.

Installation process

The basic steps in the installation of stretch coverings are simple. First mount a special mounting profile. Then the ceiling fabric is mounted in several places and heated. Heating it softens it begins to stretch. After that, the final fixing on the entire perimeter and cooling in a natural way. When the coating has cooled down, the installation can be considered finished.

If the installation is carried out directly to the walls, then everything is very simple. special profiles are attached, and in them the ceiling itself is mounted. But with plaster panels is a little more complicated. it will not withstand the load created by the tension of the blade. Therefore, before you carry out the installation, you need to understand how to attach a stretch ceiling to plasterboard. This is especially important when creating multi-level structures.

See also  How to cut baguettes without a jointer. Installing the ceiling plinth with their own hands

Tips from the professionals

The worst way to strengthen the supporting frame under a suspended ceiling is to use a package of two or three strips of plasterboard. This method is often resorted to by builders seeking to save money on the profile and bar. Vinyl film or fabric on such reinforcement is worth no more than 2 months. Then, under the action of tensile forces, the aluminum strips gradually begin to depart from the plasterboard finish, and over time the entire structure of the ceiling surface comes into disrepair.

Disadvantages of the material

The price for this building material is quite low, if compared to any natural products. But it is much higher than other options for ceiling covering, such as PPP boards. But this is far from being the main disadvantage of PVC ceilings. Considerably more serious disadvantage is considered too high sensitivity to temperatures. This material can not be used in unheated rooms. It is also forbidden to combine such a surface with conventional incandescent lamps, the power of which exceeds 60 watts.

Fluctuations in pressure is also very destructive to PVC-film. If you abruptly open a door or window in a heated room when it is cold outside, the pressure drop will be too fast. Because of this there is a risk that the ceiling simply collapses into two parts. It can also cause bubbles or dents.

This material does not tolerate exposure to sharp objects. It is very susceptible to mechanical damage. One puncture will be quite enough for the fabric to separate along the entire length.

Another disadvantage is the difficulty of cleaning. This is due to the specificity of the material. If the blade is very dirty, light pressure won’t remove the dirt quickly. But it is not possible to press the ceiling onto any hard surface.

Attaching a stretch ceiling to plasterboard: installation with your own hands

The combination of a soft ceiling finish and rigid plasterboard wall cladding, at first glance, seems unnatural. But only at first glance. In fact, about 2/3 of all stretch ceilings are assembled with sheets of pressed plaster. You just need to attach the material properly.

What gives the joint use of plasterboard and stretching canvas:

  • There is no need to put a heavy plaster sheet with a steel frame on the ceiling;
  • It is possible to perfectly close the joints at the intersection of the ceiling and wall finish.

And although many craftsmen claim that even on curved walls you can disguise a wildly uneven joint with decorative inserts, in practice this is far from. Even after the masking tape is installed between the frame of the suspended ceiling and the wall, the curvature is still clearly visible. So the combination of plasterboard and soft ceiling tiling today is still the most rational option, especially for new buildings.

See also  What is the best way to cut plexiglass at home

Tips from the professionals

The worst way to strengthen the supporting frame for a suspended ceiling is to use a package of two or three strips of plasterboard. This method is often resorted to by builders seeking to save money on the profile and beam. Vinyl film or fabric on such a reinforcement is worth no more than 2 months. After that, under the action of tensile forces, the aluminum strips gradually begin to depart from the plasterboard finish, and over time, the entire structure of the ceiling surface comes into disrepair.

Buy or order stretch ceilings in bulk and retail can now be very simple. Let me remind you, and for those who did not know, briefly tell you about stretch ceilings.

Stretch ceilings are a building construction, which belongs to the elements of finishing. Is a special framework, attached to the walls around the perimeter of the room, with a special blade stretched on it.

To disassemble the topic. stretch ceilings and plasterboard structures, it does not matter the type and texture of the fabric, it is more important to understand the methods of installation.

As you can see, all types of ceiling structures on their mountings suggest that the load-bearing structure of the ceiling is fastened to the wall (partition). Actually this fact determines how do stretch ceilings and plasterboard structures interact.

In places where the mounting frame of the stretch ceiling to the partition of plasterboard, it is necessary to lay additional supporting elements of the structure, especially for the stretch ceiling.

Most often such elements are made of wood bar, which is stacked and fastened in the metal profile of the partition structure.

Methods of fixing the stretch ceiling

In general, there are several technologies for attaching stretch ceilings:

Harpoon fastening of the stretch ceiling

How to install and MF plasterboard ceiling

Harpoon connection, by the way, it is also called the French method, the most complicated. When using it, the mounting bar is initially soldered to the stretched fabric, so the dimensions must be taken very accurately. And the fastening of the ceiling itself, should be carried out by experienced installers, because.к. errors cannot be corrected.

secure, suspended, ceiling, plasterboard

This method has these features:

  • Accurate initial calculations should be made, only 1% deviation of the tension cloth in size is allowed;
  • It is necessary to take into account the 7% expansion of the stretch fabric when heated;
  • The exact drawing of the room should be made. the fabric is made in the factory, so the shop is sent to the project with the final dimensions.
See also  Orbital sander which is better

Thus, to fix a stretched plastic ceiling by the harpoon method, it may not be a very easy task. Therefore, if possible, it is worth choosing another method.

Gunless connection

This method of fixing the ceiling, unequivocally simpler than the French. Т.к. Firstly, it does not require the prior fixing of the mounting batten, and secondly, during the installation it is possible to adjust the tension of the leaf.

Hookless fastening stretch ceiling allows you to adjust the tension of the leaf

secure, suspended, ceiling, plasterboard
  • The size of the leaf should take into account the expansion of the heat, so it is done to 15 cm less than the size of the base surface;
  • the fastening of the ceiling is done with the help of two slats, the first is fastened to the wall, into which the canvas is wound, and the second serves as a lock. It fixes the stretched PVC ceiling in the mounting baguette.

Another important point. any surplus fabric, which occurs during installation, can be cut with a regular knife. Thus, this method is much more practical, is not so demanding on the accuracy of measurements and allows you to adjust the final tension of the ceiling on the spot.

Cam connection

Quite simple and effective method of fixing for a PVC ceiling. The main feature of this system is its low height. It allows the fastening of the suspended ceiling only 1 cm from the base surface.

The installation process itself is not difficult. The canvas is simply pushed between two cams in the mounting baguette. The only disadvantage is that it is very difficult to adjust the tension of the finished canvas.

The cam mount can be mounted on the ceiling or wall

Related Posts

| Denial of responsibility | Contacts |RSS