How to remove the line from a grass trimmer

How to remove the grass trimmer spool; The grass trimmer’s mowing head

Before you start replacing the fishing line, you should detach the brushcutter’s mowing head, which houses the spool for the fishing line. This element is attached to the end of the stick of your grass trimmer and is removed by unscrewing it in the direction where the arrow on the spool points.

After removing the mowing head with the spool, you need to open it. The first thing to do is to find the locking mechanism on the spool. It is part of the spool and is like 2 clamps, by pressing which you can open the spool and get to the place where you want to wind the line.

Open the mowing head and take out the spool for winding the line

The reel can be opened either by hand or by using a screwdriver or other tools to pry open the locking elements.

How to remove the grass trimmer spool

On small electric trimmers with a lower motor position, the spool usually has two keys on each side. Click on them and disconnect one half of the coil body from the other half, which remains on the trimmer. Together with the first half, the inner part, on which the line is directly wound, is removed. Be careful when disassembling: there’s a spring inside that can come out and get lost.

On curved electric and gasoline powered trimmers, you need to grab the spool body with one hand and start rotating the reel on it with the other. It is he who attaches the spool to the trimmer. After unscrewing the thumbscrew, carefully remove the entire coil, taking care not to lose the spring inside.

remove, line, grass, trimmer

On electric and gasoline trimmers with a straight rod and reducer on the ends (besides the wire on such trimmers you can also install a knife), find the hole under the spool, insert a screwdriver into it, start slowly twisting until the screwdriver penetrates even deeper, and the spool will not lock. Now turn the entire spool clockwise and remove it from the grass trimmer. Then disassemble the spool. If the spool is on a latch, press on the sides of the latch base to bend it and release one half of the spool body from the other half.

How to replace, remove the head of the BlackDecker GL716 grass trimmer

No matter how well the electric grass trimmer we purchased worked on the summer cottage or country house. sooner or later the time will come when we need to remove the grass trimmer head for replacement or prevention. Let me say right away that you do not need to remove the trimmer head to change the line. Within this article, I will tell you how to remove or replace the entire mowing head, using the example of the BlackDecker GL716 electric grass trimmer.

How to wind the line on the grass trimmer correctly

Lawn trimmer for grass. a useful tool that greatly facilitates the life of any gardener or homeowner. The grass is great in summer, especially after the rains, so it’s impossible to do without it. But over time, sooner or later, the fishing line in it will run out, and there will be a need to insert a replacement coil of new fishing line. Some dacha owners find themselves in a deadlock. how to properly do it themselves? So our article will help them.

remove, line, grass, trimmer

Changing lines on a trimmer

This article will be able to tell you how to change the line on the trimmer. For some people this work may not be easy. But the step-by-step instruction, which is available here, will help you in this case.

So, the first thing to do is to remove the gear cover. Align the hole on the side of the shaped bottom washer and the axial notch, insert a screwdriver to secure the shaft from twisting. Now unscrew the nozzle. As a rule the threads on the shaft are counter threaded, take this into account when unscrewing.

Next, the disassembly of the nozzle follows. There the lid is fixed with clamps through the holes. So you just need to press these clips into the holes and the cover will come off. If the nozzle has an automatic / semi-automatic modes of filing a fishing line, it means that inside there is a spring, which when you open the lid can just fly out, be prepared for this. All removed parts lay out neatly in order.

Now it’s time to take the fishing line and uncoil 5 meters of it, cut off this piece. Pay attention to its thickness, you should not wind a fishing line of a greater thickness than specified in the instruction manual of the tool. Otherwise you get increased load on the engine and higher fuel consumption during operation. Bend the measured line in half to find the middle and make a loop.

In the middle of the spool there are a couple of notches, sometimes they are not notches, but holes opposite each other. We hook the hinge to one of the slots and wind the line counterclockwise. If a spool has 2 compartments, then wind each end of the line separately on them. Let the last 15-20 cm of the coil remain free and clamp it in the recesses of the coil for now.

Reassemble the device, we pull the free ends of the fishing line through the holes in the body. Put on cover by pushing clips in their slots. Now you can pull out these loose ends of the line.

It remains only to reattach the working assembly in place, as in the first point. Do not forget to turn it back when screwing it on.

Now you were able to find out how to coil the fishing line on the lawn trimmer. In fact, the entire process was detailed above. No time-consuming operations that require the presence of specialists. Your lawnmower is ready to go again.

See also  How to extend the line on a trimmer

What kinds of lines are available?

The most common type of line, suitable for nearly all types of spools is cord with a circular cross-section. It is an ordinary cord, suitable for cutting succulent grass, but it is much more difficult to cut the dead wood with it, and it certainly will not cope with bushes.

How to Replace String Trimmer, Brushcutter Line Honda HHT35s, HHT25s, UMK425U and UMK435U

as a rule, the diameter with which you can mow young grass does not exceed 1,6 mm. The thicker the thread, the coarser the grass it can cut.

There are lines with sharp facets in star or square shape, such version is more suitable for cutting dry grass just because of the sharp facets, but the disadvantage is the greater wear and tear and its durability is inferior to a round cord.

There are lines with improved aerodynamics with characteristic indentations, scales and notches, such a product makes less noise, but it is used only on gasoline mowers, because it is difficult to get such thread out of the spool, it is used most often with discs, in which pieces are inserted. The disadvantage of this product is its fragility.

Most often in gasoline trimmers with an engine more than 1.5 liters.с. cords with a metal cable inside are used.

Such thread is ideal for mowing dry grass and small bushes. The presence of a core, positively affects the durability of this material.

The disadvantage of such cord is its price, which is significantly higher than the above-mentioned opponents.

How to tuck the line into the grass trimmer reel

To replace the line in the trimmer, cut a piece of material of the right size, folding it in half. One half must be 5-10 cm longer than the other half.

To wind the line correctly on the reel, the middle of the line, folded in a loop, must be placed in the groove of the center divider. One half of the fishing line is tightly wound onto the top of the piece, the other half onto the bottom. The longer part is wound onto the lower one. Wind it in the opposite direction to the head’s rotation direction. On the cover or side of the head, an arrow should be drawn on it to show the direction of rotation. The line must be wound in the opposite direction to the arrow. Do the work carefully, firmly pressing the coil to the coil.

Insert the remaining 10-15 cm ends in the slots on the top edge of the reel, this will secure them. With the ends secure, the spool will not unwind.

How to Replace the Fuel Line in Your Grass Trimmer Video: Tool Repair Help from Sears Home Services

If you don’t have enough line of the right length, you can reel in two pieces of line instead of one. In this case, bend the end of the line with a hook and insert it into the slit in the center divider of the reel. Do the same with the second piece. Now wind first one end and then the other on your coil halves against the direction of rotation of the coil.

To tuck the fishing line into the grass trimmer, insert the ends into the holes in the mowing head and pull them out. Put the spool on the axle and push it down so that it sits in place, and again pull on the ends of the cutting thread to pull it out to its full length.

The thread should reach almost all the way to the protective cover. Cut off the excess. To do this, you can use the steel plate installed on the hood, acting as a knife and automatically trimming excessive line length when unwinding head.

The bobbin is closed with a protective cover. Always hold the reel in place and push it down until the latches click into place. Always check that the cover is in place on the grass trimmer and that the latches click into place, otherwise it could come off during operation. In this case, the bobbin will be thrown by the rotational force.

Do not try to reel in as much material as possible or the reel may not fit properly, causing problems with fitting and locking the cover. It is better if the spool is filled with wood so that it does not go beyond the dimensions of the part.

In addition to mechanical double-bladed scythes, there are also single-bladed models. They differ in that the cutting filament only comes out on one side. The spool in such braids variants may not have a central partition, instead of it, a slit in the lower edge is used to install the nonworking end of the thread, in the upper edge there is also a slit for fixing the working end.

With the replaced fishing line you can start working. Do not mow thick weeds or brush twigs, this is not a job for a grasshopper. To prevent injury and line breakage, do not allow stones and branches to get under the brush.

For mowing lawns one filling of a spool of reinforced line is sufficient for an area of 400-600 m2.

Once the cutting line has been worn out as a result of operation, turn off the mower and remove the cover on the mowing head. Pull the fishing line out of the slot by pulling it to the desired length and reinsert it in the slot. The amount of material wound on the spool is enough for 5-10 cycles depending on the model of the machine. When putting the cover back on, check carefully that the grooves where the clips are inserted are not blocked.

When the filament is worn out, disassemble the mowing head again, pull out the spool and rewind the working filament on it.

How to Remove the Reel from a Gas Mower

Since the choice of trimmer for grass we looked at in the previous article, now we will tell you how to correctly fill the trimmer for grass with line, and what is better to choose based on the criteria of work.

After you have purchased a trimmer for grass and began to use it intensively, at some point there will be a question of replacing the line, as it is the most wearing element in the tool, the intense use of trimmer for grass will lead to frequent substitution of expendable material.

What kind of lines are there?

A common type of fishing line that fits on virtually all types of reels is the circular cord. I can’t unscrew the lid. But how to remove the reel itself from the grass trimmer is nowhere to be found. This line is a common thread, suitable for mowing succulent grass, but to cut dead wood with it will be much harder, and much less she can not cope with the bushes.

Usually, the cross section, which can mow young grass, does not exceed 1.6 mm. How to remove a spool from a weed trimmer? The fishing line can be made of. The thicker the line, the more coarse grass it can overcome.

See also  How to wind a fishing line on a lawnmower

There are lines with the sharp edges in the form of a star or a square, such a version is more adapted to mow dry grass just by having a sharp edge, but the disadvantage is its greater wear and tear, and the strength of she concedes round cord.

There are lines with improved aerodynamics with appropriate indentations, scales and notches, similar product makes less noise, but use it only on benzokosa, since the output of such a thread from the spool is difficult, using it in most cases with discs, which are inserted segments. How to remove the spool from the grass trimmer? Fishing line on the spool to press the lock and. The disadvantage of such a product is its fragility.

In most cases, gasoline trimmers with an engine more than 1.5 liters of power.с. use a cord with an iron rope inside. What kind of line is used for grass trimmer? How to remove the spool from the trimmer for grass? Threading the spools of different types of bobbins. Such a cord is perfectly suited for mowing dry grass and small bushes. How to remove the spool from the grass trimmer, disassemble it, grass trimmer. How to remove the spool from the grass trimmer, how to finally assemble how to choose a pump for. The presence of the core, positively affects the durability of this material. The disadvantage of such cord is its price, which is significantly higher than the above listed opponents.

How to remove and put the spool on your lawnmower!

Subscribe to the channel!And we will teach you everything)))

Hand held lawn trimmer. How to Change a Filament in a Reel.

In this video I show you how easy it is to put the fishing line on the spool of your hand trimmer without any other help.

How to tuck the line into the grass trimmer spool

To wind up a fishing line, you need about 10-15 min. What is a grass trimmer reel?? Plastic body with the cassette inside, which has a special hook for comfortable winding line. Virtually all trimmer reels have a similar attachment principle, this is the central screw-button, by pressing which, it is possible to pull the line of the required length. How to remove the spool from a mowing head. Before the trimmer head. The photo below shows several examples of different trimmer reels.

Reels of trimmers, the motor of which is at the very ground, have a different attachment to the axis of rotation, they have two buttons on the spool, located at the edges, which must be pressed, otherwise, the change of thread is no different from other cassettes.

The principle of proper line winding is identical in all of the above cases, so let’s look at the standard version with 2 tendrils as an example.

To remove the spool with a fishing line to unscrew the screw, located in the center, but note the thread is left, because you have to twist in a clockwise direction, made this specially, so that during operation, it has not opened under the influence of centrifugal force.

Next, using a screwdriver, dismantle the head and pull out the spool, on which the line is wound. How to remove the spool from the grass trimmer, grass trimmer, how to finally assemble the nozzle. Measuring the desired length and folded in half, it is necessary to tuck the line into the spool, eventually bringing its ends opposite each other (for this there are special slots for fixing).

After that, you need to assemble the head in the reverse order, passing the ends of the cord in the two appropriate holes.

If there are any doubts or is not quite clear how to charge the line on the trimmer for grass, we advise to look at how to correctly wind the line in the lawnmower. How to remove the spool from the grass trimmer is to open the spool to make a simple trimmer. In this video clip, the instructor will carefully step-by-step unfold the trimmer head, measure out the right amount of fishing line, usually 2 to 4 meters, and demonstrate the assembly and installation on the grass trimmer.

How to remove the coil from the grass trimmer

In this article, we’ll tell you how to remove the spool from the grass trimmer. With electric and gasoline grass trimmers, the mower head is often removed to replenish the cutting thread, to install a spare disc with a different diameter or shape of line, as well as to install cutting blades.

Any lawn trimmer is designed for regular replacement of the mowing head, so its design provides, firstly, the simplicity of the operation, and secondly, the reliability of attachment. This is true for STIHL electric grass trimmers as well as for Chinese lawn mowers.

Stihl Trimmer Line Replacement

Online-store Benzo-Zip offers to buy spare parts for grass trimmer on favorable cost of all popular models, which are present at the Ukrainian market.

What is the line feed in a trimmer?

How great that the mower has been replaced by such a device as a grass trimmer, a versatile garden tool for cutting thickets. When it has a spool of fishing line, it can cope with any area of neglected grass, and when it has a disc. there is no equal trimmer.

Yes, this machine has long been rated highly by gardeners. Thanks to what the device was improved, adjusted to different tasks and scales of work. In addition to ergonomic handles and a variety of shapes, of course, not without additional functions. For example, the types of line feed are a big part of the. This feature is what we will talk about in our article.

The line is the fastest consumable material during mowing. And how frustrating it can be to have to frequently lengthen the cord or coil a new one in. In connection with this constant problem, additional types of coils were developed, each with its own “convenience”. At the moment, according to the method of filing the fishing line are three types of spools:

Manual line feed

Manual. from the name comes from the fact that the line will have to lengthen by hand every time. Let’s make the accent on the fact that the device must be turned off during the operation. Which, in principle, is logical. Pros: this type of reel is recognized as the most reliable. the line is consumed evenly, no unnecessary loads on the grass trimmer device, a budget version of the reel. Disadvantages: time-consuming manual cord extension.

Semi-automatic line feed

Semi-automatic. during the operation of the grass trimmer, if you need to lengthen the cord, you need to touch the ground with the spool. There is a button on it that opens the line release mechanism. Of course, the line will not unwind with every accidental contact with the ground. To do this, there is a start button on the handle of the grass trimmer, which must be pressed and simultaneously “hit” the grass trimmer. Pros: uncomplicated principle of operation, comfortable and fast feeding during grass trimmer operation. Disadvantages: more expensive than a manual reel, more complicated feed system (from a technical point of view).

See also  STIHL fs 55 does not start. If the grass trimmer does not start - check the serviceability of the filters

Automatic line feed

Automatic. you could say it’s the “last word in machinery” today. Now for the consumption of fishing line can not follow, t.к. The grass trimmer automatically lengthens the cords itself. This action occurs when the engine speed is reduced. Advantages: the filament is fed automatically during the operation of the trimmer for grass. Disadvantages: more expensive than a semi-automatic by several times, technically more complicated to arrange (probably the weakest side of such reels). Only a quality automatic spool will serve you well for a long time.

CONCLUSION: A manual reel is moderately line-consuming but less easy to feed. Semi-automatic. we can say that this is the best option, the main thing is to monitor the line and in time “hit” the grass trimmer. Automatic spool. does everything for the operator, but the only disadvantage: it does not spare the line. Why the high material consumption.

It is worth noting that the fishing line plays an important role in the efficiency of any reel, as well as the motor of the grass trimmer itself. It is worth taking into account the thickness and shape of the cord. And it is better to do it in accordance with the parameters specified in the passport of the tool. For example, if you install a line thicker than recommended by the manufacturer, then during operation, the cords will increase resistance, which will give additional pressure on the engine. And what such negligence leads to. it’s no secret.

As for the shape of the fishing line, here everything is also not simple. information can be found in a separate article “Grass trimmer fishing line: which is the best to buy”.

Grass trimmer modernization: how to change the fishing line on the saw blade

Receive one of the most read articles in your inbox once a day. Join us on and

So, in order to upgrade the grass trimmer, you need to find the right diamond saw blade from the TST series. These discs are designed for plywood and woodworking. The disc must have the following characteristics: outside diameter at the teeth tips: 216 mm, number of teeth: 48, insertion hole: 30 mm. There must be three rings with the same outer and different inner diameter in the package. They are needed to compensate for the difference between the fitting hole and the counter element on the clamping washer.

It is easy to install the diamond disc on the grass trimmer. This operation is no different from the installation of any other nozzle, except that extra attention and care must be taken. First remove the spool of fishing line by blocking the reducer shaft with a pin. The line container should be rotated counterclockwise. Before installation of the saw blade make sure that the hole is larger than the diameter of the seating belt on the washer.

After that it is necessary to try on compensating washers one by one and choose the one that not only fits the width, but also completely selects the gap between centering belt of the lower washer and the saw blade seat. First install the lower washer and the wear ring on the gearbox shaft one after the other, then the diamond disc and then the upper washer and only after that the protective cup. Don’t forget to tighten the whole package on the reducer shaft with the nut.

How to remove the spool and change the line

Trimmer owners, mainly beginners, get confused and almost panic-stricken when they need to change the cutting attachment or line in the filament spool. Very often when trying to unscrew the mowing head users simply cause it to fail, unaware that it unscrews in the opposite direction. To prevent this from happening if you need to replace the tool, it is recommended that you read the step-by-step instructions below.

  • Before you load the line into the spool, switch off the brushcutter engine or de-energize the electric grass trimmer to avoid injury from unintentional starting of the cutting attachment.
  • Unscrew the nozzle attached to the gearbox shaft. To do this, the shaft must be secured by aligning the holes on the washer and on the axle, and inserting a metal rod or screwdriver into them.
  • Unscrew the brush head. be aware that the thread on the shaft is left. That’s why you should turn the grass trimmer’s reel to the right, i.e. clockwise.
  • Disassemble the mowing head. Head cap is mostly secured with clips. To remove it, it is necessary to push these locks into the body, pushing the edges of the cover. If your trimmer has a semi-automatic mowing head that has a button at the bottom, then the disassembly of the head must be done carefully, because you can lose the spring, which sometimes flies out when you remove the cover.
  • Cut the required amount of fishing line. Usually its length is 5 meters. Use the cord of the diameter indicated in the instruction manual of the tool. Do not exceed the maximum line diameter, as this will strain the engine and increase gasoline consumption.
  • Find the center of the cord by folding it in half. You have a loop.
  • There are special grooves (there may be holes) cut into the inside of the coil. Insert the line loop into this groove.
  • Wind the line on the spool by turning it counterclockwise. The cord should be tucked in as evenly as possible, with no overlap and good tension. Once you’ve wound the line, leave about 20 cm of loose line, and secure the ends in the slots on the sides of the spool.
  • Assemble the mowing head. Do not forget to insert the spring and the washer (if present) before you finally reassemble the line. Insert the spool into the housing and thread the ends of the filament through the holes or eyelets.
  • Put on the cover and fasten it with the latches.
  • Screw the nozzle back onto the reducer shaft, also securing it with a screwdriver. Screw the grass trimmer reel to the left (counterclockwise). arrows).

How to replace a hair in the trimmer

Today’s trimmers or gazonokosarki actively vykoristoovuyutsya as gentlemen of private houses, and in upkeep for lawns, parks, garden objects. High efficiency of the tool allows for a short time to mow a large amount of grass without expending too much physical effort.

But the brushcutter has one problem. The capron hair which is the cutting element wears out with the time, as a result the tool will be out of order and it will not be possible to mow with it. That is why the problem of replacing the hair in the trimmer is relevant to those who use lawn mowers.

Related Posts

| Denial of responsibility | Contacts |RSS