How to put wheels on a cultivator.

Wheels for a walk.behind tractor: viewing views, how to do it with your own hands

Choosing a single.shaped tractor for their personal economy, users pay attention to the technological characteristics of its mechanism, for example, power and weight. Few people are interested in which wheels are installed on it, because the quality of work and the duration of operation depend on the mechanism.

Standard wheels sold in the kit are good for working on soft soils. In difficult conditions, they quickly fail, and new ones are quite expensive. Our article will tell you how to make wheels for a walk.behind tractor with your own hands.

Additional designs

For the cultivator, it will be possible to build both transport elements and additional details of the frame. Thus, the unit “transforms” into a small tractor. In this form, a motor cultivator can be used as an all.terrain vehicle. At the same time, wheels with a standard type with low pressure are removed and changed to soil.spaces (large size).

Watch how to make soil.bending for a cultivator with your own hands, watch in the next video.

Why independently install wheels on a single tractor

Modernization can be associated with various reasons, among which it is worth noting the main ones:

  • Often the re.equipment requires a single.axle tractor when the wheel pressure on the walkover is low. In this case, the user wants to put new wheels on a single tractor to improve the quality of the earth’s arable.
  • Rubber tires that wear out quickly, and their replacement is expensive for plowing. Such products are suitable for work on soft soil, and for solid ground (virgin lands) it is recommended to use wheels from Lada on a single tractor, which are installed without the help of a master. They allow you to expand the capabilities of the chassis of the motor.cultivator.
  • It is necessary to increase the chassis, for which wide wheels are installed on a single.axle tractor or pneumatic, which are spaced.

Alteration of factory products for homemade products may be due to the fact that the owner of the equipment wants to expand the range of attachments used.

How to choose a running unit for a walk.behind tractor

Consider how to choose wheelchairs. It is necessary to take into account the conditions of operation of the equipment, which will allow you to correctly choose products from one or another machine. Rubber passes well along the soft ground and on a flat surface, and for complex soils it is recommended to use soil.

How to make a Cultivator Mini Tiller with 49cc 2-Stroke Engine

PLOW WARS! The Hoss Plow vs The Earthway Plow (WHO WINS?)

For diesel motor cultivators, metal wheels must be used that have an aggressive tread and a large discount of discs.

If Zhigulevsky products are not suitable, then the chassis for the walk.behind tractor must be selected according to the following parameters:

For rocky soil and soil that can damage the wheels, only a whole chassis should be used.

Be sure to put the support wheel, which helps optimize work on the field, especially during the plow.

Wheels that the master wants to put on their own must be of excellent quality.

See also  What oil to fill in the worm gear of a cultivator

To ensure a high level of work, it is necessary to take into account the power and productivity of the motor.cultivator.

How to choose

For the operation of equipment in winter, you can install paired wheels. They consist of two parts that have the same shapes and dimensions. Thanks to this design, the chassis provides the walk.behind tractor for uneven areas. On a flat surface, the speed of technology increases significantly. In the presence of such chassis, slipping is excluded.

When choosing wheels for a single tractor, it is also important to take into account their operating conditions. For example, for processing moist and clay soil, not pneumatic crusts are suitable, but iron with graftsers

In addition, if the equipment of the equipment includes paired wheels of rubber, it will not be able to show high performance in difficult conditions. Additionally, it is also worthwhile to turn to the size of the tires. it is best to choose large and wide wheels with a pattern on the tread. The best option would be, if you have two types of chassis, for example, pneumatic and iron with primers.

The choice of wheels depends on the intended use of the technique. So, to perform harvesting work, it is recommended to purchase pneumatic. Their radius can be 40 cm, they are adapted to work on normal soil. Experts recommend buying chassis with a deep tread to increase patency and maneuverability. If it is planned to process the soil containing stones or representing the virgin land, then cast wheels will be the right solution.

An important criterion in the choice is the weight of the walk.behind tractor and its attachment equipment. For heavy technology, it is recommended to select high cross.country skills with durable metal rims, and cargo can also be transported to them. Cannot be installed on the technique of low pressure tires. When leaving the dirt road or asphalt for heavy equipment, chamber wheels are well suited for 6.00-12 inches. They have extensors and fasteners in the configuration.

The tires of the F-122 model also proven themselves. They have increased cross.country ability, the depth of the tread pattern is 22 mm, the pressure in the chamber is 160/400 kPa

To make the right choice in favor of a particular type of tires, you should pay attention to their marking. It contains information about the type of tire design, its speed index and possible load

Deciphering these designations is usually provided manufacturers of products in the form of a table.

Additionally, the capabilities of the wheels can be expanded by installing extension cords. They are usually mounted on the unit when working on complex soil. These devices also increase the maneuverability of technology. Extension cords are sold in various sizes from 200 mm to 375 mm.

Summing up, we can say that each type of wheels has its own pros and cons of. Therefore, when purchasing chassis on a single tractor, you need to know what work will be done for them. If we compare iron and pneumatic wheels in terms of technical characteristics, the former have more advantages, since they additionally increase the power of the equipment and withstand any load. As for the pneumatic, they provide the motoblock stability, but are quickly damaged and require replacement.

How to make a cultivator for a walk.behind tractor with your own hands?

You will need the following tools and devices:

The source material from which the cultivator is made with your own hands:

  • square plates 15×15 cm from stainless steel,
  • rectangular plates 12×4 cm from the same material (for the manufacture of cutters of the cultivator),
  • steel pipe,
  • nuts and bolts.
  • Guided by the drawing, it is necessary to drill each square and cutter, and then connect the square on both sides with mills.
  • The resulting part should be attached to the base. It is better to do this with bolts, since welding does not give the compounds necessary for the cultivation of the soil of the soil.
  • In the same way you need to do with all the squares.
  • At the next stage of the assembly, when the working part is compiled, it is necessary to make a hole corresponding to the diameter of the steel pipe.
  • The pipe is cut in half, and to each of the parts formed, it is welded by the chassis with cutters.
See also  Which cultivator is better with electric or gasoline?

The resulting design must be connected with bolts or welding apparatus with a motor block shaft. After checking the reliability of the compounds, you can test the cultivator made with your own hands.

For greater clarity and accuracy of this instruction, it is recommended to watch video.

In the same way, you can make a cultivator for a mini.tractor with your own hands, changing the sizes of parts if necessary. The difference is a hook that can be made of stainless steel.

wheels, cultivator

How to make soil.bearing with your own hands for a cultivator?

So that the wheels of the cultivator do not stick in the damp and plowed ground, and also do not compact it, it is necessary to make soil.spaces that will help to additionally fall apart. Increasing the cross.country ability of a mini.vector or a walk.behind tractor, they additionally increase the efficiency of work.

A welding machine is needed to perform soil.spaces, which will also be needed if you need to repair the cultivator with your own hands, as well as metal corners and wheel wheels are needed. The sequence of work can be performed in two versions:

wheels, cultivator
  • The metal corner is cut and welded to the rim of the disk with segments, at a distance of 10 cm from each other. The resulting protrusions will play the role of the teeth of the soil.
  • The second option for the manufacture of home-made primerials is based on the rims from the chopped gas cylinder, 7-9 cm wide. This is the basis for the wheels of soil. With the help of a welding machine, corner hooks are cut and welded to the rims with an edge, at a 15-centimeter distance from one another. The square form of the plate is welded into the center of the rim, the diameter corresponding to it. The axis is welded to the center of the plate.

Such a cereal is applicable not only on the cultivator, but also on the mini.tractor and the walk.behind tractor.

How to choose a running unit for a walk.behind tractor

Consider how to choose wheelchairs. It is necessary to take into account the conditions of operation of the equipment, which will allow you to correctly choose products from one or another machine. Rubber passes well along the soft ground and on a flat surface, and for complex soils it is recommended to use soil.

For diesel motor cultivators, metal wheels must be used that have an aggressive tread and a large discount of discs.

If Zhigulevsky products are not suitable, then the chassis for the walk.behind tractor must be selected according to the following parameters:

  • diameter. at least 40 cm;
  • width. within 20 cm;
  • aggressive drawing;
  • whole cameras, the presence of sealed places or damage is not allowed. it will be quite unpleasant when during operation the car fails in the field where it will be difficult to carry out repairs.

For rocky soil and soil that can damage the wheels, only a whole chassis should be used.

Be sure to put the support wheel, which helps optimize work on the field, especially during the plow.

Wheels that the master wants to put on their own must be of excellent quality.

See also  How to put a hammer on the handle correctly

To ensure a high level of work, it is necessary to take into account the power and productivity of the motor.cultivator.

How to choose the right rubber of low pressure on a single tractor

Experienced owners of units give their advice and recommendations.

Adviсe

Choosing tires for a motor cultivator, it is necessary and strictly necessary:

  • to study the characteristics of the device, make measurements so that the chosen tire is fully suitable for. The correctly selected tire will be the key to the excellent work of the walk.behind tractor;
  • decide on the type of work that will be performed on the technique, based on this, make a choice of wheels, and, accordingly, rubber for them;
  • To determine the type of soil, based on this, you can already make a choice of type of tread. In some cases, tires from Lada or Oka cars may be suitable. With softer and viscous soils, tires with a more embossed tread and higher cross.country ability, for example, tires from Germany for Moto 140 80 15.

Recommendations

It is recommended first of all to pay attention to the following parameters when choosing rubber on a single tractor:

  • size, t. e. This is the figure that stands after the name of the wheel. The size of the rubber is customary to indicate in inches. For example, tire 6.00-12, where 6.00 is the width of the tire diagonal, and 12 is its planting diameter;

Rubber for a single tractor for 12

  • Purpose. a number of tires are intended only for motoblocks, a row only for transport, as well as for other purposes. This must be taken into account when choosing rubber, coordinating with the purpose of the cultivator;
  • quality or compliance with standards, quality of materials. It is recommended to purchase tires of well.known manufacturers, which are guaranteed to differ in durability, strength and resistance to environmental conditions.

Manufacturing homemade ceremonies

Sometimes pneumatic fires can slip (soft land, slurry after rain, ice) and your work may go around. For better adhesion to the soil, reliable devices are needed. These are ordinary ceremonies.

You can, of course, buy them in a store, but not everyone wants to spend money on what is easy to make yourself, and, from “catchy” materials. over, there are only two requirements for them, and both are necessary to ensure reliable adhesion:

There are many options for wheels with soil.made with your own hands. We will dwell on two of them. For their manufacture, the main tools are:

To perform the first option, you will need metal stripes (thickness of about 5 mm) and discs from the car. Their diameter depends on the size of the cultivator’s feet. Many take as an optimal version of the discs from the “Lada”.

Homemade soil to the cultivator.

The method of manufacturing soil hooks is very simple:

  • cut the corner grinding of the strip so that their length is about one and a half times larger than the width of the disks;
  • They are bent in a vice at an angle so that they are inserted between the two sides of the disk;
  • distribute the stripes evenly and weld to places;
  • strengthen the resulting soil.spaces on the axis.

The second option is more complicated. For him, take a sheet of thick metal, marked and cut something like a large stars of a bicycle or a template from a clock. Further, parts of the resulting rays are bent and metal plates are welded to them.

Related Posts

| Denial of responsibility | Contacts |RSS