How to get the line out of a grass trimmer reel

How to get the line out of the trimmer for grass Video

Since the choice of trimmer for grass, we looked in the previous article, now we will talk about how to correctly fill the trimmer for grass fishing line, and what the best option would be to choose from the parameters of the criteria of work.

How To Tips for Easy Restring of Weed Eater with 2 strings

When you bought a trimmer for grass and began to use them intensively, at some point will raise the question of replacing the line, as it is the most wearing element in the tool, the intense use of trimmer for grass will lead to an infrequent replacement of consumables.

A commonly used type of line that fits on virtually all reel types is cord of round section. This ordinary line is suitable for mowing succulent grass, but to mow dead wood with her it will be much harder, and the more it can not cope with shrubs.

line, grass, trimmer, reel

You, the cross section with which you can mow young grass does not exceed 1.6 mm. The thicker the thread, the coarser the grass it can overcome.

There are lines with sharpened facets in the form of a star or a square, this option is not simply adapted to mow dry grass at this time by using the available sharp edges, but the disadvantage is its greater wear and tear and on the strength of it inferior round cord.

See also  How to put the fishing line on the mower spool

There are lines with improved aerodynamics with appropriate dents, scales and notches, a similar product makes less noise, but use it only on benzokosa, as the output of such thread from the spool is difficult, using it in most cases with disks, which are inserted segments. The disadvantage of this product is its fragility.

In most cases, gasoline trimmers with an engine capacity of more than 1.5 liters are equipped with a power tool.с. use a cord with an iron rope inside. Such thread is perfectly suitable for mowing dry grass and small bushes. The presence of the core, positively affects the durability of this material. The disadvantage of such a cord is its cost, which is much more than just available opponents.

Types of line for grass trimmer/mower cutter

If you set a goal to wind a fishing line, it will need about 10-15 minutes. What is a grass trimmer spool? Plastic body with a cassette inside, which of course requires a special hook to wind the line comfortably. Almost all trimmer reels have a similar fastening principle, this is the central screw-button, by pressing which, you can pull the line of the desired length. The photo below shows several examples of different spools for trimmers.

line, grass, trimmer, reel

Reels of trimmers, the motor of which is near the ground, have a different attachment to the axis of rotation, they have two buttons on the reel, located at the edges, which should be pressed, otherwise the change of thread in the same way is not characteristic of cassettes.

The principle of proper line winding is identical in many of the available cases, for example let’s look at the standard version with 2 tendrils.

To remove the spool with a fishing line to unscrew the screw, located in the center, remember, the thread is left, so you have to twist clockwise, it is made on purpose, so that at one time of work it has not opened under the influence of centrifugal force.

See also  How much fishing line is needed for the grass trimmer?

How to replace string trimmer edger line

Next, using a screwdriver, dismantle the head and remove the spool, which is actually coiled line. Measuring the required length and folded in half, you need to tuck the line into the spool, eventually bringing its ends opposite each other (for this purpose you have special slots for fixing).

After that, you need to assemble the head in reverse order, passing the ends of the cord in the two respective holes.

If in doubt, otherwise not clear how to charge the line on the grass trimmer, we suggest to look at how to correctly wind the line into the lawnmower. This video clip carefully step by step instructor will open trimmer head, measure the required amount of line, usually this is from 2-to-4 meters, and demonstrate the assembly and installation of the trimmer for grass.

Operational features of garden trimmers

Once you have decided to buy a trimmer for grass, you should familiarize yourself with the technical characteristics of trimmers, how to operate and service equipment.

EASIEST WAY TO STRING YOUR WEED EATER

As a rule, more expensive grass trimmers are considered more reliable and more powerful units. Unlike a grass trimmer with an electric engine, the gasoline version periodically requires the replacement of some elements. Spark plugs, fuel and air filters must be changed according to the recommendations of the manufacturer who produced the grass trimmer. The price of four-stroke engines is usually higher than for two-stroke variants. At the same time, the four-stroke engine produces significantly less toxins and is more economical.

See also  What is better lawnmower or electric mower

Many gardeners who already have a lawn mower in their inventory, want a Rostech lawn mower to cut the grass in hard-to-reach places. Working on difficult terrain, under bushes, near curbs is a distinctive feature of the grass trimmer from the lawnmower.

powerful grass trimmers, such as gasoline trimmers, are great for mowing tall grass, shrubs and thin trees. And for grass are quite suitable electric options. Gasoline grass trimmers are quite often used in the professional field and on large areas of the lawn.

Depending on the condition of the lawn, you choose a special harness. If you need to clear an area with shrubs and thin trees, it is better to opt for a metal disc with teeth. A plastic knife or a spool of fishing line is great for grass.

If you have decided to buy a trimmer for the grass, you need to know how to change the cutting part. In the case of the metal disc and plastic blade, everything is much easier and the equipment changes completely. Regarding the fishing line, the line will wear out or break off over time if it hits a hard object. In this case the effect of the grass trimmer is less and it is necessary to take the line out of the spool. This is done as follows:

I hope all of this information has played an important role for you after you decided on a Centaur lawnmower.

Related Posts

| Denial of responsibility | Contacts |RSS