How to drain gasoline from a grass trimmer

How to clean debris out of your gas tank, John Deere Lawn mower Tractor. ( Craftsman, Toro, etc. )

Prepare the grass trimmer and prepare the chainsaw for winter storage.

Mow / finish all that needs to be mowed / finished (and at the same time use the fuel so that it is not left for winter storage in the trimmer or for storage in the chainsaw).

Remove the tank cap, turn the grass trimmer (chainsaw) upside down and drain all the fuel from the tank into a container for maintenance use (canister or bottle with funnel for washing engine parts during maintenance). This is essential in preparing the grass trimmer and preparing the chainsaw for winter storage.

drain, gasoline, grass, trimmer

Start the trimmer for grass / chainsaw and exhaust the rest of the fuel from the carburetor until it stalls (if you leave the fuel in the system, after some time the fuel will separate and in the carburetor channels formed oxides and tar deposits, which will interfere with the normal operation of the engine after winter storage).

How to drain gas from your mower tank- siphonless

Be sure to wash everything on the handlebar, everything on the boom and both grass trimmer guards with warm water and a brush, and do a complete care of the trimmer. add grease to the gear, remove the blade, clean inside the lead chuck, inspect everything on the chain saw for cracks, bends, scuffs, misalignments, tears (in the same way you should do care of the chainsaw). Then, for storing the grass trimmer and storing the chainsaw, make t.о. air filter, partial disassembly of the motor, its washing and purging, lubrication of moving parts, inspect the condition of the clutch and make a fine adjustment of the grass trimmer carburetor.

Prepare the grass trimmer and prepare the chainsaw for winter storage. unscrew the spark plug, bring the piston to the top dead center (starter), pour 20 gr. The engine oil and slowly turn the crankshaft a few times to lubricate the cylinder and piston group. Reinstall the spark plug (do not tighten).

Care of the trimmer and care of the chainsaw during winter storage. once a month it is advisable to remove the plug and make a few crankshaft revolutions to refresh the lubrication in the cylinder.

Wrap the grass trimmer and chainsaw engine in a cloth or bag to prevent moisture from getting inside the lawnmower engine during winter temperature changes, when condensation forms. 6. It is better to store the grass trimmer and chain saw in winter in a hanging position (to save space), preferably in a warm and dry room or in a room with a constant temperature.

Get your notebook in the preparation of the grass trimmer and chainsaw for winter storage, analyze and summarize the income and expenses for the season, and draw conclusions for the next season (it may be worth raising the cost of their services or to buy some specialized tools).

General rules of machinery preservation

Any tool, regardless of species and purpose, before putting in storage should be washed, dried and look around for wear and tear parts. Nothing is worse than water getting into moving or vulnerable parts and machinery. Freezing in an unheated room will cause ice to form and damage parts. For fire safety reasons it is better to drain the gasoline from the tank. But different advice for the oil. the equipment can not be left “dry”, so the oil is not removed for the winter, and change.

When storing the machine, fold it as shown in the owner’s manual

Sharpen cutting edges (such as lawn mower blades) and lubricate swivel joints. Check the condition of the fasteners and power cord of power tools, if necessary, change them without leaving them until spring. Let us have a closer look at each type of equipment and its preservation requirements.

This is probably one of the few tools that can be used even when it’s cold. But the chainsaw’s working temperature range is usually limited, as it contains frost-resistant parts, gasoline and oil. If the manufacturer guarantees the tool to work at temperatures of.10°C. it’s a very good indicator, and such a saw can be used almost all year round. If you are leaving your garden for good, make sure it is properly preserved.

“The heart” of any chain saw is a single-cylinder two-stroke carburetor-type engine. The chain is another key element. Exactly the care of these 2 elements and is devoted to most of the tips on conservation:

drain, gasoline, grass, trimmer
  • first drain the remaining fuel from the tank, carburetor and chain oil. You can idle the chainsaw and wait for gasoline to run out in order to fully utilize the fuel. Then wipe the gas tank dry so it doesn’t start to rust. This is an option for long-term preservation, at least for 3 months. But there is a second option for those who cut down the forest or do other work in the winter. In this case it is recommended to fill the tank up to the brim with high-quality gasoline and leave it in that condition for storage. If you urgently need to cut down a tree, fine, you have quite a ready-made technique at your fingertips. But remember, gasoline, which in 2-3 frosty winter weeks will start to remind the mixture of sour milk, can put even a high-class engine out of operation;
  • with a wire dipstick or a home-made nozzle take out from the fuel and oil tank filter-nozzles. Wash them and put them back after drying or change them for new ones as needed. Do the same with the air filter;
  • Remove the chain and guide bar and clean them from sawdust, sawdust and dirt;
  • Remove the clutch cover, wash it thoroughly under running warm water and let it dry. Lubricate the worm gear and the screw of the side chain tensioning system;
  • Remove the spark plug and free it from carbon deposits and fuel residue. Pour 5-7 ml of engine oil into the spark plug hole and turn the engine crankshaft 3 to 4 turns to distribute the oil in the connecting rod mechanisms and the cylinder-piston group. Leave the piston at its highest point (in the raised position). Then put the spark plug in place, but do not put on the ignition terminal;
  • Coat the bar and chain with barrier oil and store them wrapped in a piece of paper or cloth that has been soaked in oil;
  • Pack the tool and store the removed parts in a dry, dark and dust-free place.
See also  Trimmer saw for home use. Saws for crosscutting

How to Store a Chainsaw in Winter

This is probably one of the few tools that also has work to do in the cold season. True, the operating temperature range of a chainsaw is usually low due to the fact that it contains non-freeze-resistant parts, gasoline and oil. If the manufacturer guarantees operation at.10°C, this is a very good indicator and such a saw can be used almost all year round. But if you are leaving your home for a long time, make sure you preserve it properly.

At the “heart” of every chainsaw is a carburetor-type, single-cylinder, two-stroke engine. The chain is another important element. It is the care of these two elements that most of the preservation recommendations are devoted to:

  • First drain the fuel, carburetor and chain oil from the tank. You can run the chainsaw at idle and wait for it to run out of gasoline in order to get a full load of fuel. Then wipe the gas tank dry so it does not rust. This is an option for long term storage, at least 3 months. But there is a second option for those who cut wood or do other work in the winter. In that case it is advised to fill the tank to the brim with quality gasoline and leave it in that condition for storage. If you have to cut down a tree in a hurry. great, you have all the machinery you need right at your fingertips. But remember, gasoline, which in 2-3 frosty winter weeks will start to resemble a sour cream in consistency, can put even a first-class engine out of operation;
  • using a wire dipstick or a homemade nozzle, remove the fuel and oil filters-tips from the fuel and oil tanks. Rinse and reinsert after drying or replace with new ones if necessary. Do the same with the air filter;
  • Remove saw chain and guide bar and free them of sawdust, wood dust and debris;
  • Remove the clutch cover, rinse thoroughly under warm water and allow to dry. Lubricate the worm gear and side chain tensioning screw;
  • take out the spark plugs and clean them of soot and fuel residue. Pour 5-7 ml of engine oil into the spark plug hole and turn the crankshaft 3 or 4 times to distribute the oil over the crankarms and cylinder-piston group. Leave the piston in its highest point (raised position). Then reinsert the spark plug, but do not put on the spark plug clamp;
  • Coat the bar and chain with protective oil and store them wrapped in a piece of paper or cloth soaked in oil;
  • Pack the tool and store the removed parts in a dry, dark, dust-free place.

About once a month, rotate the crankshaft to regrease the connecting rods, pistons, and cylinders.

If you have an electric lawn mower, all you need to preserve it for the winter is to lubricate the guide bar and the chain with a barrier fluid.

Gasoline lawnmower preservation for winter

Lawn mowers are seasonal machines, used only a few months a year and only for one task: cutting the grass. Some manufacturers still allow their use as a light garden vacuum cleaner for autumn cleaning and processing of fallen leaves (actually, any lawn mower with a grass catcher box is good for this purpose), but few point directly to this possibility. After one season is over, it makes sense to make preparations for the next. preservation. Although the process consists of a number of tasks, it does not take much time. Lawn mowers with gasoline engines need it most. Actually, and the main tasks on preservation refer to the motors.

The basic principles of conservation are the same for all engines. For any equipment, one of the first tasks is to clean the surfaces. But in the case of lawn mowers, it makes sense to clean them completely at the end. And it is necessary to begin with the engine. Most petrol lawnmowers are equipped with BriggsStratton engines, the exceptions are either the products of major companies that produce engines under their own brand name, or inexpensive equipment with engines of not very well-known (usually third-party) brands.

The first thing to do is to drain the fuel from the tank. Gasoline spoils when stored for a long time and small motors are very sensitive to its quality. The recommended period of use of regular gasoline is not more than one month. If you leave it in the tank for the winter, you may have problems with starting in the spring. In addition, gasoline residue in the fuel line and carburetor can lead to tar deposits that are difficult to remove later.

See also  How much oil to add in a gasoline trimmer

The easiest way here is to disconnect the tube from the tank to the carburetor and drain the tank “dry”. It is easier to get the residue out of the carburetor by starting the engine, and in a minute or two it will stop on its own. There is an alternative option. Some companies, including BriggsStratton, offer fuel stabilizing additives that allow the fuel to keep its quality for two or three years.

The next important point is oil change. Generally speaking, you should change oil in all motors according to the formula “after so many hours of operation or once a year”. If you have a BriggsStratton, you change the engine oil every 5 to 8 hours and every 50 hours thereafter. But lawn mowers, at least domestic ones, are rarely used with such intensity, so most likely you need to change the oil every year. You don’t need much oil: An ‘average’ lawnmower engine needs about 0.6 litre.

The question “what oil to use” is a favorite topic for lengthy debates on the Internet and applies to all appliances with internal combustion engines. There are many opinions and they are all different. What’s worse, salespeople in stores don’t know this information either and usually offer something more expensive. In fact, the answer is simple: you need to follow the manufacturer’s recommendations, which are in the instruction manual for the equipment or the engine. Buying “higher quality” oil than that specified by the manufacturer is not necessary, especially if you have to change it once a year anyway. Such purchase will be of little use: this oil simply will not have time to “prove” itself. Many manufacturers, including BriggsStratton, offer their own brand oils. That’s the best option.

Before you fill up the oil, it makes sense to divert your attention to the “first by the score” mentioned above. to fully clean the lawnmower itself. It is very simple. A petrol engine with a full fuel tank and oil sump should not be turned over. Exactly, any mower can be turned either sideways or backwards (with support on the handle). But it’s either/or. How exactly you can. it is usually written in the manual, if these data are not available, you need to look at the engine: it depends on the location of the oil filler, fuel tank lid, air filter and other elements. It is clear that if the fluids are drained out, there is nothing to leak. you can do a thorough cleaning of the underside of the deck of dirt and grass residue.

After cleaning the outside of the mower you can clean or replace the air filter (1). The filter can be a sheet of foam rubber, a flat or rounded corrugated paper element (sometimes with an additional foam insert). different engines have different. After you have removed the filter you should clean the inside of its body from dust (2). To prolong the lifetime of the filter it is necessary to blow it out with a compressor. It will not make things worse.

drain, gasoline, grass, trimmer

The last important operation is the preservation of the cylinder liner and piston rings. For this purpose take out the plug (and at the same time assess its condition) and pour some milliliters of engine oil (3) into the plug hole. After putting the plug in, without putting on the cap, turn the crankshaft a few times with the hand starter.

Next, if the mower will be stored “on wheels”, you can fill in new oil. If “for the sake of compactness” it needs to be stored or transported vertically, it is better to postpone the filling until the spring. It is best to attach an oil warning label or sticker to the engine. You should not rely on your memory, it will be forgotten after the winter and it is forbidden to start without oil. Probably can’t be done though. today’s engines are equipped with an oil level sensor. But if the sensor fails, the engine will fail after a few minutes of work. Such a breakdown, by the way, is not considered a warranty case.

Finally, after installing the mower in the place of “wintering” (dry, preferably heated room) it should be covered with some kind of cover, so that less dust settled on it. After these recommendations you won’t need to think about the mower until the next season.

How to get a grass trimmer ready for winter

The next important tool for every dacha user is a gasoline trimmer. Its proper storage is one of the main factors of its long service life to the owner.

A large number of parts and not full availability of all parts of this technique does not always allow for a full preparation for winter storage, but a few steps of preparation are necessary to do:

Serious machinery: storage of cultivators and power tillers

A large number of parts and not full availability of all parts of this equipment does not always allow for a complete preparation for winter storage, but a few steps in preparation should be done:

  • First of all it is necessary to prepare engine. After you have drained the fuel and the rests are exhausted, it is necessary to change the oil while the engine is still warm.
  • clean the filters: renew the paper filter and wash and dry the foam filter and soak in some machine oil. Clean fuel filter.
  • clean the spark plug, dip it in petrol. While it dries, we pour oil into the cylinder and distribute it by turning the shaft. After wrapping the candle back up.
  • Thoroughly clean the engine and muffler from dirt. Gearbox should not be cleaned with metal scrapers. they could damage the shield and cause rust. It is better to use wooden devices, flushing all the elements. After the parts have been in contact with water, they need to be dried;
See also  How to put on a grass trimmer strap

Lubricate piston group

If you store the scythe at the cottage in a barn or other frostable and defrostable room, we recommend to unscrew the candle and add a little oil to the cylinder, twist the starter to lubricate. Then put the piston in the upper dead center to close the intake and exhaust window, screw the spark plug back in. That way the cylinder, piston and rings will be lubricated, and that will prevent the rings from rusting and sticking. Try not to spoil the spark plug thread, it can also be lubricated.

Do you need to prepare gasoline-powered garden equipment for the winter period?

This question is controversial in many respects. Many gardeners are of the opinion that brand name garden equipment does not need any preparation for winter storage if high-quality fuel and lubricants are used. And in the spring, after refilling and pumping gasoline or fuel mixture, without any problems will continue its work.

However, the storage conditions for all garden equipment is completely different. Some people can afford to store it in a warm room, while others have it all winter in a wet and frosty shed. And the concept of “high-quality fuel and lubricants” we have a rather vague.

drain, gasoline, grass, trimmer

My opinion is that if you can avoid moisture (dew) when storing a gasoline engine, then the preservation of the cylinders and elements of the garden equipment for the winter is not necessary. It is sufficient to simply drain and drain the remaining gasoline or fuel mixture. The appearance of moisture can be avoided in several ways: store the engine at room temperature, or provide quality thermal insulation of the engine, for example, store it in a thick box, upholstered with mineral wool inside.

Lawn mower storage in winter. Goals and objectives.

Proper storage of the lawnmower in winter consists of several preparatory steps. The main one: preparing the engine of the brushcutter for a long winter storage. It will prevent the pressed rings in the piston, it will get rid of the consequences of oil hardening, condensation of moisture on the internal parts of the engine with subsequent corrosion.

  • Clean the gasoline train from the dirt.
  • Drain the gasoline or fuel mixture from the garden equipment and screw on the gas tank cap. I do not recommend, in the future, to use the drained mixture as fuel for machinery. How much fuel mixture for two-stroke engines can be stored read here.
  • Start the lawnmower and wait for the gasoline residue in the carburetor, primer and fuel line to come out at idle speed. There is not much residue and the garden equipment will not run for long, Before stopping, the engine will slightly increase revolutions, due to the depletion of the fuel mixture.

Preservation of the brushcutter. treatment of the engine cylinders.

  • Removing the spark plug.
  • Unscrew the spark plug. We check the gap and its general condition.
  • With the help of a syringe spray through the spark plug hole in the cylinder cavity 2-2.5 ml of oil, which is designed to make the fuel mixture of your garden equipment. You can use any antiscale, anticorrosive agent, ideally, a specialized agent for the internal preservation of the engine of motor vehicles.
  • Turn the piston several times with the manual starter with the ignition off.
  • Screw in glow plug.
  • Put the candlestick back on.

Attention. If you accidentally overflowed oil, and your garden equipment does not want to start in the spring. First unscrew and degrease the spark plug.

Lawnmower preservation. treatment of carburetor and filter cleaning.

  • Remove air filter cover and filter itself with metal mesh, if the lawn mower is equipped with one.
  • Open the throttle valve.
  • Squirt some corrosion protection agent into the carburettor.
  • Rinse and dry the air filter. Put it back in place.

Preparing the cutterbar for a longterm storage.

  • Removing the blade.
  • Clean the dirt off it.
  • Coat it and its seats with an anti-corrosion agent. To save money, you can use any inexpensive machine oil, including.ч. and used oil.

Preparing the mowing line reel for winter storage.

  • Remove mowing head from gardening equipment.
  • Dismantle and clean off grass and dirt.
  • Winding trimmer fishing line off the reel.
  • Keep trimmer fishing line in a humid place to prevent it from drying out and becoming brittle. For example, to wrap in a bag with water added.

Tip. If the trimmer line does become coarse and brittle in spring, place it in water for several hours. It will partially regain its qualities.

Warnings:

The weather is getting warmer and the mowing / sawing season is fast approaching. Remember that customers, children, spectators, helpers, animals, etc.д. For safety reasons, it is important to maintain a distance of at least 15 m from your lawn and the lawn in front of you. from a working grass trimmer or chain saw! (trimmer care and chainsaw care must be done in full).

Read the warnings from the manufacturer of your grass trimmer, which states that children (and adults) can be injured by debris, glass, debris, etc. flying out from under the blade.д., as well as an unexpectedly unfolded gasoline bar from the recoil of colliding with a stationary obstacle.

The Academy of Pediatrics recommends that children should be at least 16 years old to work with a trimmer or chainsaw. Make safety the main priority!

Related Posts

| Denial of responsibility | Contacts |RSS