How to dilute oil for grass trimmer

Fuel to oil ratio for two-stroke engines

Oil for these engines comes in different concentrations, so one part of the lubricating liquid is 20-50 parts of fuel, and the correct ratio is indicated on the packaging or oil container.

dilute, grass, trimmer

How to find oil gas mix ratio for string trimmer and how to mix fuel

To make the right mixture, use special containers (canisters), which show the volume of the contents at different levels.

First determine the optimum ratio of both liquids, then pour the required quantity of petrol (to be checked against the markings designed for it) and add oil to a special opening in the reservoir, also checking the oil level against the markings.

When the two liquids reach the correct marks, they are mixed together by shaking the canister thoroughly.

How to Dilute Gasoline and Oil for Grass Trimmer

Dilute gasoline for the grass trimmer must be in the correct proportion. Not enough oil can cause poor lubrication of the mower components, resulting in rapid wear and tear. If you add more oil than is permitted, the pistons and spark plugs will get soiled. The engine oil changes slowly, but the engine needs to be serviced as soon as possible.

How much gasoline is needed for a certain trimmer model can be found in the user manual. Most often for 2-stroke gasoline mower engines use a fuel mixture in the proportion 50:1, where 50 is part gasoline, 1 is part oil. That is, 20 ml of oil should be added to 1 liter of petrol. The table will help you find the right ratio.

To get the proportions right, use containers with a milliliter scale. A special double-neck canister is perfectly suited for these purposes, it is designed for mixing and storing oil and gasoline. For example, oil can be drawn in with a medical syringe without a needle. Before mixing the fluids, make sure that there is no water, dust, or particles of dirt in the container for the ready-to-use fuel mixture.

Do not mix petrol and lubricant directly in the fuel tank, moreover, the proportion of oil and petrol should be strictly observed. If you ignore this rule, then the work of the grass trimmer engine can be unstable, due to which it will quickly fail.

It is not recommended to use plastic bottles or canisters for this purpose. Due to the fact that gasoline tends to dissolve plastic, which means that some plastic can get into the fuel tank, which can lead to carburetor failure. Although there are special plastic canisters marked “flame”.

  • petrol;
  • Oil suitable for air-cooled two-stroke engines;
  • canister, preferably a metal canister;
  • A container for mixing, also better a metal one;
  • gloves;
  • respirator.
See also  The grass trimmer does not work what to do

In addition to protective equipment, do not forget about fire safety rules, because gasoline and motor oil are easily flammable:

  • It is better to work outdoors to avoid the accumulation of gasoline vapors in the room;
  • Do not smoke or create situations associated with the occurrence of sparks.

Make the mixture of petrol and oil as follows

  • Pour 1 liter of gasoline into a container, add half of the oil you need. Mix thoroughly, and do it very carefully away from open flame sources.
  • Add the rest of the oil to the gasoline for the weed trimmer and mix it well again. Fuel can now be poured into the fuel tank of the grass trimmer.

The mixture can be stored for up to three months, therefore it is better to dilute petrol to an amount sufficient for several uses.

Only quality oil can be used for dilution, and it is recommended to buy it only in trusted stores, such as specialized hypermarkets.

Grass trimmers and lawnmowers are powered by two-stroke engines, which have a simplified design. Rarely, but there are trimmer models with 4-stroke motors that run on pure gasoline. Power units of two-stroke type do not have a compartment for pouring engine oil (oil sump), due to which the weight of the tools is reduced and their cost is reduced. If the rotating parts of the motor will not be lubricated, then eventually they will quickly fail. To prevent this, the grass trimmer is not filled with pure gasoline, but with a mixture of oil. What oil to dilute with gasoline for grass trimmer?

To begin with, let’s remember or find out what types of oils by chemical composition are produced:

  • Mineral fluids. designed for low-power machinery with air cooling. It is the cheapest type of lubricant for motors
  • Semi-synthetic substances. they are used for equipment that has air and water cooling
  • Synthetic. suitable for all types of engines with different types of cooling. They do not require frequent changes, and this type of lubricant is several times more expensive than mineral and semi-synthetic

From the above it follows that the grass trimmer oil is suitable for any composition. mineral, synthetic and semi-synthetic. Oils with different chemical compositions differ in price, so rely on the recommendations of the tool manufacturer when buying. The instructions give recommended information on which types of oil are better to use. If it is a TC-W3 standard, then it is not so important what composition the substance should have. In this case, mineral, semi-synthetic and synthetic can be diluted with petrol.

How to thin grass trimmer oil

On average, one liter of gasoline is mixed with 20-50 ml of oil. STIHL and Husqvarna, for example, recommend 100 ml of oil for 4 liters of gasoline.

How to prepare a fuel mixture for boat engines

Add 1 liter of oil. 50L gasolinePetrol
100 ml 5 л
200 ml 10 л
0,4 л 20 л

Fuel mixture for two-stroke engines

Grass trimmers, which are equipped with a two-stroke motor, do not have a separate system designed to supply oil for the purpose of lubricating the rubbing parts. For this reason it is not necessary to fill such devices with pure petrol, but with a mixture of fuel and engine oil. Lubricants designed specifically for 2-stroke engines. The use of automotive engine fluid will lead to premature engine failure.

See also  Baltic grass scythe how to get from kaliningrad

Preparation of fuel mixture for two-roller engines

Gasoline for a two-stroke engine is AI-92. Using AI-95 may cause engine overheating and uneven engine performance. You should mix petrol with oil in the ratio 50:1, where 50 is fuel and 1 is oil. It turns out that you need 20 ml of oil per 1 liter of fuel.

Correct Way To Mix Gas and Oil For a ChainSaw, WeedEater etc.

If the engine is worn out or the tool is hard at work, the ratio is 25:1. If there is not enough lubricant, it will cause scoring on the cylinder walls and piston surface. The piston ring will then be destroyed, causing the engine to seize. Overpowering is not so critical, but it can lead to the formation of carbon deposits. The piston ring will get corked, which will reduce the power of the device.

RYOBI: How to mix and store 2 stroke fuel

Oil to petrol ratio for fuel mixture

Step-by-step instructions on how to dilute the fuel mixture

Check your trimmer instruction manual for optimal oil/gasoline ratio. as a rule, it is equal to 1:50, 1:40 or 1:25 (for heavily worn engines). Use a measuring jug with a milliliter scale or a large-volume syringe to check the proportions.

Dilute petrol with oil in a suitable container (preferably metal or thick plastic). Special canisters with double-neck for mixing are convenient in use. Wear a respirator and gloves when operating.

Do not pour oil into the fuel tank, because you will not mix the fuel in the proper manner. If this rule is ignored, the engine will malfunction and the tool will break down quickly.

  • Pour 1 liter of gasoline into the container
  • Add half of the required amount of oil
  • Mix fluids thoroughly and keep away from open flames
  • Pour the rest of the oil into the container and mix everything again

Mix the fuel in the correct proportions. Adding too much oil to the gasoline will cause pistons and spark plugs to get soiled. The lack of lubricant causes burrs on the cylinder walls and pistons, which destroys the piston rings and can lead to engine seizure.


The oil used in trimmers is special two-stroke oil with “2T” marking on the package. Automotive, and even more so, transmission oil is strictly forbidden to use. There are three types of two-stroke oil:

It all depends on which substances are in the oil base. Mineral oil is the cheapest and least reliable. Its use is justified only in household trimmers that work for 30 to 60 minutes a day with long pauses. Most manufacturers of this level of brushcutter indicate that TC-W3 class oil is suitable for the engine. This means you can use mineral, synthetic and semi-synthetic 2T.

For professional trimmers it is desirable to buy only the oil brands that the manufacturer recommends. Usually semi-synthetics and synthetics with special additives. Manufacturers label the oil with the letters:

dilute, grass, trimmer
  • TA. for two-stroke engines up to 50 cubic centimeters;
  • TV. for 50- to 200-cubic-inch engines;
  • RT. for motorcycle engines, snowmobile engines, etc.д.
See also  What makes up a gasoline trimmer for the grass

If the oil type is not specified in the manual, all three versions can be used in brushcutters. How much oil to add to the grass trimmer fuel depends on the brand of the tool and the quality of the gasoline. Also there may be letters FA, FB, FC etc. on the oil package.д. They show the level of smokiness. The closer the second letter is to the beginning of the alphabet, the more smoke is emitted during combustion. As a rule, high-quality oil has very little. The choice of oil is not affected by this indicator. important are the inscriptions “self mix” and “pre mix”. The first word means that the oil dissolves on its own, while the container with the second mixture must be shaken several times. The best oils on the market are STIHL, Husqvarna, Echo, Champion.

Gasoline to lawnmower oil ratio

Lawn mowers are a fairly common technique for controlling weeds in country, homestead, road, and residential areas. These devices have two other names. the grass trimmer and the lawnmower. These units differ in their engines. The more expensive models have four-stroke engines, all other models have two-stroke engines. Of course, the latter are the most popular among population, because they are simpler in construction, lighter in weight and much cheaper than their four-stroke competitors. However, two-stroke models are inconvenient by the fact that the fuel mixture for them must be prepared manually, maintaining a strict dosage between gasoline and oil. In four-stroke counterparts, mixing of these components is automatic, you only need to fill the gas tank and oil tank with the appropriate substances. Let’s consider the question of the correctness of refueling exactly two-stroke brushcuts, because it depends on this, how effective and long will be the work of such a unit.

Gasoline grass trimmers with a four-stroke engine

Grass trimmers, powered by a four-stroke engine, have a more complex device. Gasoline and oil are poured into different containers, from where they are then fed into the engine. Lubricants designed for two-stroke engines cannot be used in these models.Gasoline for grass trimmer with such an engine must be brand AI-92 or AI-95. Using fuel with a lower octane number is not recommended. it will lead to unstable engine operation.

Many trimmer manufacturers persistently advise to use fuel and lubricants produced under their own logo. They are often more expensive than their competitors that are sold under other names. Is it worth overpaying for brand name oil??The companies that make gasoline tools do not produce fuel and lubricants. They buy these products from companies engaged in the production of oils, and then packed lubricants in containers with their logo. That is why you can easily buy a suitable oil from any manufacturer. The main thing is that it corresponds to the parameters of the engine.

Related Posts

| Denial of responsibility | Contacts |RSS