How to cut triplex glass with an angle grinder

Cutting a mirror at home with your own hands

In order to obtain a high quality piece of glass for framing, it is recommended that you prepare carefully. Cutting glass is more successful if quality material is chosen.

One of the signs of high-quality glass is a green or blue shade of the edges. When making glass, sometimes technological inaccuracies are allowed. as a result, you get sheets with stripes on them. Do not use such sheets to paste into a window, they noticeably distort the image. Do not take glass plates with scratches.

As for the thickness of the glass to be cut, it must depend on the size of the frame. If the height and width is less than 600 mm, a sheet of 2.5 mm thick is enough. If the height or width exceeds this value, the glass plate must be about 4 mm thick.

When glazing at home, a piece of glass should be cut so that it is 3-5 mm smaller than the size of the frame intended for its insertion. Even the smallest misalignment will make it impossible to place the glass in the frame.

Before you start cutting, it is necessary to prepare the glass properly. If it is new, wipe the plate with a damp cloth, then a dry newspaper. Wiping with a dry cloth is not recommended. it can leave particles of lint on the surface that can hinder the movement of the tool when cutting.

Cut the glass with an angle grinder and drill

If you choose used glass, you should know that it looks considerably worse and requires more careful preparation. It is necessary to wash the surfaces, adding special detergents. Then everything must be dried and degreased using kerosene or turpentine to wipe it down. Do not expose the sheet of glass to dust as it dries.

Choosing a quality material for cutting

To get a quality piece of glass for framing, it is advisable to prepare carefully. Cutting glass is more successful if you choose high quality material.

One of the signs of high-quality glass is a green or blue shade. In the manufacture of glass, technological inaccuracies are sometimes allowed. as a result, you get sheets with stripes on them. Do not use such sheets for your window, they will noticeably distort the picture. You should not take glass plates with scratches.

As for the thickness of the glass for cutting, it must depend on the size of the frame. If the height and width is less than 600 mm, a sheet of 2.5 mm thick is sufficient. If the height or width exceeds this value, the glass plate must be about 4 mm thick.

When glazing at home, a piece of glass must be cut so that it is 3-5 mm smaller than the size of the frame you want to install it in. If the glass is even slightly misaligned, it cannot be inserted in the frame.

Before starting to cut, it is necessary to prepare the glass properly. If it is new, wipe the plate with a damp cloth, then with a dry newspaper. Wiping with a dry cloth is not recommended. it can leave particles of lint on the surface, which can interfere with the movement of the tool when cutting.

RODEX ELECTROPLATED GLASS CUTTER DISC

Cut the glass with an angle grinder and drill

If you choose used glass, you should know that it looks much worse and requires more thorough preparation. It is necessary to wash the surfaces, adding special detergents. Then everything must be dried and degreased using kerosene or turpentine to wipe it down. It is necessary to avoid dust on the sheet of glass when it dries.

Choosing the right material for the cut

To get a quality piece of glass for the frame insertion, it is recommended to prepare carefully. Cutting glass is more successful if you choose a quality material.

See also  How to put a disk on an angle grinder

One of the signs of high-quality glass is a green or blue shade of the ends. When making glass, sometimes technological inaccuracies are allowed. as a result you get sheets with stripes on them. Do not use such sheets to insert them into windows, they distort images noticeably. Do not take glass plates with scratches.

As for the thickness of the glass to be cut, it must depend on the size of the frame. For heights and widths less than 600 mm, a sheet with a thickness of 2.5 mm is sufficient. If the height or width exceeds this value, the glass plate must be about 4 mm thick.

When performing glazing in the home, a piece of glass should be cut so that it is 3-5 mm smaller than the size of the frame intended for its insertion. Even the smallest misalignment will make it impossible to insert the glass into the frame.

Before you start cutting, it is important to properly prepare the glass. If it is new, wipe the plate with a damp cloth and then with a dry newspaper. Wiping with a dry cloth is not recommended because it can leave particles of lint on the surface that can hinder the movement of the tool when cutting.

If used glass is selected, you need to know: it looks much worse and requires more careful preparation. It is necessary to wash the surfaces, adding special detergents. Then everything must be dried and degreased, using kerosene or turpentine to wipe. When drying a sheet of glass, you must avoid getting dust on it.

Three-toothed disc

When it is necessary to make processing of large numbers of sheets, you need more effective tools. To mechanize this process at home, use a three-toothed disc for plexiglass and wood. This is an effective tool to figure out how to evenly cut plexiglass.

In fact, this is an advanced angle grinder. Among the materials with which it is recommended to work with the three-toothed disc, not only plexiglass, but also wood is mentioned. This is a great way to cut plexiglass at home in a straight line.

It is important that the temperature of the acrylic does not rise, it does not begin to melt and stick to the disk. It can be used to cut sheets up to 10 mm. When deciding how to cut plexiglass, take a three-toothed disc.

Can an angle grinder cut glass?

In any apartment, you may be faced with the need to replace the glass in a window, door or cabinet. It is very rare to find a ready-made glass of the right size. Of course, you can ask for help from a specialist, but it takes time and money. All the necessary work is quite possible to perform with your own hands at home, if you know how to cut glass correctly.

triplex, glass, angle, grinder

How to cut a mirror without a glass cutter

All around us mirrors: in the car, bathroom or lady’s cosmetic bag are regular glass with a layer of metal on the back surface. Cutting glass with a mirror coating, almost no different from the usual and can be done with a regular glass cutter or the methods above. When there are no special tools at hand, the most effective cutting tool is a file or a diamond disc. Let’s take a closer look at how to cut a mirror at home without a glass cutter, using improvised means.

The first thing to do is to prepare the surface to be trimmed: wash, degrease and dry. The mirror must be clean, without stains and strong streaks. Otherwise the line for the trimmer can get twisted, and the bevel will be uneven. The working surface where the cutting will be done must be flat and not very hard. You can put a thick cloth or a piece of linoleum on the table.

Having prepared the material and the working place, we mark on the mirror the line for the future cut of the trimmer. It is better to lead straight lines with a ruler or rail with a height of at least 5 mm. To prevent the stop from slipping, you can glue a strip of duct tape to its lower part. Then you should take a file, an angle grinder or other tool, and make a cut by the marked line. A more detailed process of the different cutting methods is described above.

See also  How to make a stationary circular saw from an angle grinder

When you are ready to cut the glass, all you have to do is break it in the right place. You can do this by placing a small object (match, pencil, nail) under the cutting line for the trimmer and pressing lightly on both sides. You can chip the glass against the edge of the table or gently tap the bottom with a small metal object (drill or spoon). If the glass does not break, there is no need to press very hard. It is better to make the second cut within a couple of centimeters of the first one.

Why order from us

We perform quality glass cutting of any degree of complexity and offer:

Rectilinear and curved cutting of common and laminated glass

High cutting accuracy with minimal errors

Fair for materials and services. Free cutting of our material to your size

Features and limitations

The equipment imposes some restrictions on the size and shape of the cut pieces:

Minimum dimensions from 50 mm for a straight cut

The maximum size is a full sheet of glass

Mirror and glass shape cutting on a template or blueprints

It is often necessary to cut a product of complex, non-rectangular shape, for example, in the manufacture of table tops on antique or custom-made tables.

For such products requires a drawing in autocad, the creation of which in itself presents certain difficulties. In this case the easiest way to cut the product is to use the template.

You need to cut the template out of any solid material (organicite, plywood, plexiglass, plastic, etc.).п.) and give it to us. Our equipment allows you to cut out the glass or mirror by the template with a very high precision.

Shape cutting is in demand in many projects.

If you can not make the template yourself, our specialists can come to your object and cut out the template for you. This service must be paid for separately. Its cost is equal to the price of the measurement (2500 p.m.). within MKAD) 500 р. for each template made (template material is included in the price).

Also, our specialists can measure and prepare drawings of your product. According to these drawings the product will be cut on a CNC machine with very high precision.

Laminated Glass Cutting and Waterjet Cutting

Cutting laminated glass is specific, it has its own problems and “sharp corners”. You actually need to cut 2 sheets of material and film.

Products of PVB factory-made laminated glass of any size and form can be ordered here, including curvilinear. We work on professional automated cutting tables that’s why we guarantee high precision of cutting, including triplex.

triplex, glass, angle, grinder

When it is necessary to cut out glass of very complex shape, with lots of complex areas, the most progressive method is used. waterjet cutting, or water sawing.

In this method, a special machine feeds water and abrasive compound under very high pressure, as a result of which the water cuts the material like a laser. This method of processing is very accurate and allows you to get almost a smooth edge.

But it is also very expensive because it uses a lot of water and consumables, one of which is a high pressure nozzle. The method of processing described above should be used for very complex products, where other ways. are impossible.

Is it possible to cut glass with an angle grinder?

Pobedite bit

If you know what glass cutting is all about, here is another way to cut glass without a glass cutter. With some experience, a single bit with a pobedite tip can be sufficient for this operation. The main thing is that the drill should be more or less new, with sharp angles on the head.

READ How to choose an angle grinder to cut concrete

The process itself of cutting glass with a borer is much the same as with a regular roller glass cutter. Of the differences, you can distinguish a higher force of pressure, but otherwise all the actions are standard. We lay the glass on a flat surface, mark the trimmer line of the cut, attach the bar, and guide the trimmer line from top to bottom. Before cutting, turn the tip so that the glass is in contact with the sharpest corner. After obtaining a clear line for the trimmer, we break the glass on the mowing line of the cutter.

The method of cutting glass with a pobedite drill, requires skill and practical experience in handling this material. Beginner masters have very little chance to make an accurate cut this way, but with patience and straight hands the necessary result can be achieved.

See also  How to put a blade on a metal hacksaw

glass cutter

The technology of cutting glass with a glass cutter is quite simple. To do this, you must follow certain conditions and choose the right glass cutter. Nowadays there is a wide enough range of this tool to make your work a pleasure.

  • Diamond glass cutter, time-tested and remains a leader in its field to this day. Glass cutters with beveled cutting edges are best for home use. Such a tool is designed to cut glass up to ten kilometers and is suitable for any thickness of material used. From time to time this glass cutter needs to be sharpened on a special stone.
  • Roller. According to the name, the cutting part of such a glass cutter is made in the form of a roller made of a strong cobalt-tungsten alloy. The number of rollers can be one to six.
  • Oiled. This tool works on the principle of a roller glass cutter, with the difference that its handle has a built-in reservoir of oil, which is fed automatically to the roller. Suitable for cutting thick glass.

For how to choose a good glass cutter, see

triplex, glass, angle, grinder

So, once you have sorted out the glass cutter, place the glass on a flat surface. Mark the glass and get to work. You can use a ruler to make it easier. It is worth taking into account the fact that a line for a trimmer should be used the first time, otherwise a second attempt will lead to cracking of the surface. It is necessary to cut glass with a glass cutter using equal efforts along all the length of the mowing line.

how to cut glass with a grinder

Peculiarities of work with different kinds of glass

If you work with ordinary glass, then cutting it will not cause any difficulties. For this purpose, both glass cutter and simple scissors will work well. And if for the manufacture of products you use glass with a complex configuration, then the matter is more complicated. Peculiarities of work will largely depend on the properties of materials:

  • Tempered glass. in general, at home, this material is better not to cut, otherwise it will simply lose its properties. But if you need a product with elements of such material, and you will need to make it your own hands, it is better to cut in advance. And remember, it is better to leave the work to the experts, because the hardening process takes place only under a number of conditions;
  • Ribbed glass, or patterned glass cloths are often used for glazing doors or for decorative interior design. But unlike tempered glass it can also be cut at home. The process of work does not differ much from cutting ordinary glass, but, as mentioned earlier, you should cut only from the smooth side and preferably with a roller glass cutter;
  • Acrylic or organic material. it is a transparent plastic made of synthetic resins, but is still called glass. No special tools are needed to cut this material. You can use a cutter, metal saw, and other edging tools at home for this purpose. And if the thickness of the material is 2 mm or less, you can cut it with a simple office knife.
triplex, glass, angle, grinder

Working with tempered glass

Often a question on forums: how to cut tempered glass? The answer is simple: tempered glass cannot be cut or drilled. At any attempt to do this, it loses all its properties and simply breaks into small pieces. Tempered glass was used in cars before triplex was invented. In an accident, glass shards must not have injured passengers. So it is not worth trying to cut tougher tempered glass with any tool.

To understand how to cut glass with your own hands, you just need to take it and try it. The choice of method depends on individual skills and the availability of the necessary tools. But all these options are quite feasible at home.

Related Posts

| Denial of responsibility | Contacts |RSS