How to cut linoleum at home

How to trim the bedded linoleum around the perimeter of the room perfectly flat

During the repair process, some very small nuances come up that are very important in the job. Linoleum must be cut by a special technology, it is cut at right angles, strictly on the ruler or template.

The template can be cut from plywood or thick cardboard, it can be used in niches and bay windows for convenience.

At the joints, it is better to cut the material at an acute angle. In any case, the sharp edge will be cut. after the final fitting of the panels to each other.

Many are wondering how to properly trim the linoleum around the perimeter of the room. To do this, it is better to put something solid under it before cutting, and then it will not go in waves after a year, and will delight the owner with its strength and beauty for a long time.

laying stage

How to cut linoleum at home

To cut linoleum, it is not enough to take only a knife, you will also have to prepare a tape measure, an angle, a long ruler. In addition, for the template will need a sheet of paper or thick cardboard. Given that the linoleum canvas “does not forgive” mistakes, all measurements are better not one but several times to check for accuracy. The movements when cutting should be confident, with force.

How to cut linoleum evenly

To cut linoleum according to the size of the room passed without any difficulty, and the cut turned out even, you should familiarize yourself with some of the subtleties of this class of floor coverings. PVC is a fairly robust product, but if the edge of the sheet of sharp depressions or small cuts in the direction of the main part, there is a high probability of rapid damage to the material. Therefore, it is necessary to work very carefully, making an even cutting of the cloth.

Given that the linoleum of polyvinyl chloride is easy to cut with a well-sharpened tool, all accidental movements should be excluded. Otherwise it can provoke a deviation from the specified direction. Avoid such troubles by using a template or a long ruler for cutting.

Canvases with uneven edges do not allow the seam to make invisible

Since the method of cold chemical welding is used to join the two canvases, they must be cut with maximum precision. Thanks to this it will be possible to avoid pronounced seams, which strongly spoil the appearance of the entire floor. Before you start cutting linoleum cloth, be sure to check all measurements, the quality of the sharpness of the cutting element.

Important! Begin to cut the floor covering only after its adaptation to the microclimate in a particular room, the material should take two days to get used to the temperature and humidity level in the room. This is the only way to achieve a stable stiffness from the linoleum.

The work algorithm for cutting the entire length or width of the coating involves the following steps:

    Mark on the inside or outside of the cloth a fishing line, which will serve as a guide for cutting.

How to trim linoleum along the walls

There are several ways to trim the flooring near the wall: with a trowel and knife, and by using only a sharp tool. The second option is considered to be faster and more effective, you can also cut felt-based linoleum in this way. To do this, you need:

How to cut linoleum under the baseboard

The technology of trimming the floor covering is similar to the previous one, it involves the following actions:

If the coating is cut close to the wall, then in the summer at high temperatures near the baseboards there will be a roll, which will be very noticeable.

How to cut the linoleum under the toilet

Instructions for trimming the finish covering laid on the floor under the toilet:

    Put the toilet bowl (without cistern) on the floor, but without the cuff and sealant. This is necessary to make a marking on the linoleum. Using a marker, outline the outline of the bottom of the toilet, then remove it.

How to cut linoleum under the pipe

Laying flooring around pipes. the process is not easy, it requires a special approach:

linoleum, home

How to trim linoleum in the corners

Their own difficulties arise and when fitting the size of the sheet in the corners. Here you need to adhere to the following rules:

    Press the linoleum, make a cut perpendicular to the floor, in the place where it “finds” the wall.

How to cut linoleum in a roll

To cut the floor covering in a roll, you must:

To avoid mistakes before starting work on cutting the material, you should measure the width of the room in several places, preferably in 3-5. The largest figure is taken as the basis. The tool must necessarily be with a well-sharpened blade.

How to cut linoleum in the apartment: on the walls, under the skirting, under the pipe and in the corners

To properly trim linoleum when laying, you need to use a special tool that allows you to make a precise and accurate cut. An ordinary kitchen knife will not work here. The best option is to use a tool for the specific type of flooring. Choose a special device should take into account the thickness of the linoleum, the indicators of density. For these purposes, it is effective to use a clerical or construction retractable knife, or one that is designed for work with floor coverings.

See also  How to disassemble the Huter grass trimmer spool

When cutting linoleum, it is important to follow the technology and use a sharp knife

If you need to cut linoleum at home, then for a positive result, you need to follow certain recommendations:

  • When cutting a floor covering move gradually, making small cuts. But first you need to make a mark on the inside.
  • For work with internal corners of the linoleum V-shaped cut.
  • When laying linoleum with a pattern material should be laid with the front side up to make a mark without distorting the picture. If mistakes are made when cutting linoleum, you can not correct them.

For a proper fit, two strips of flooring overlap each other to make an overlap. It is recommended to cut them together. This method is effective, but requires the application of certain efforts and the presence of a sharp knife.

The final trimming of linoleum should be done with a hook-shaped blade, and the marking. trapezoidal. Fit the floor covering to the wall only after the completion of basic work with him. To properly cut linoleum on the floor and not allow a gap between it and the wall, you must use a wall marker, a metal ruler.

How to cut linoleum correctly

The variety of linoleum patterns can choose it for any interior. Linoleum. a practical and easy material that does not require high skills to work. Proper cutting of linoleum before laying. one of the important conditions for the aesthetic appearance of the floor covering. Consider in detail how to properly trim linoleum and what you need to do.

To properly cut linoleum you will need:

  • Prepare the linoleum for cutting. Let the rolls stand in a warm place for at least 2 weeks to stabilize measurements. Unpack, roll out and cut the linoleum in strips of the required length, taking into account the allowance for trimming and shrinkage. The longer the panel, the more you make an allowance. If the length of the linoleum over 10 m leave a margin of 50-60 mm, up to 10 m. 30-40 mm. For a small room up to 6 meters long leave a margin of no more than 20mm. Lay the cut sheets on a pile for up to 4-5 days to completely straighten.
  • Spread the prepared linoleum on the floor and mark the wall contours on it. Firmly press the linoleum to the floor with a ruler. Use a sharp knife to make a puncture and a small cut. Continuing to press the linoleum on both sides of the cut, carry out the cut on the ruler all around the perimeter. When you reach the corner, make a V-shaped notch in the linoleum. If the room has a complex contour of the floor (pipes, columns, bay window, etc.), you can cut the linoleum.д.), prepare the protruding pieces in advance. First make a mark on thin paper or newspaper, and then transfer it to the cardboard. Trim the linoleum in difficult areas with small strips and exactly according to the cutting pattern.
  • Cut the linoleum with a colored pattern. Pre-lay the material with the pattern upwards. Lay the linoleum parallel to the wall, press it with a long ruler and cut it off. Where one sheet ends, you need to put the next. Carefully select the pattern of adjacent pieces, and at the junction, lay them overlap. Mark the future seam. Lay a heavy object on the linoleum to prevent it from moving when you cut it. Slowly cut through the two layers on the ruler and collect the scraps. In rooms with large areas you have to cut several pieces of linoleum and match the patterns to the border of the linoleum. In this case, cut the joining borders with a ruler and knife, remembering to accurately align the pattern.

How to cut linoleum?

Important! Do not try to level the rolled product by your own efforts (namely by putting a weight) quality material should become smooth on its own.

Important! You have to make an allowance so that if the material dries, it won’t be smaller than the area of the room.

  • In order to cut the linoleum evenly it is necessary to put a heavy metal ruler to the place of the cut and use a cutting tool to make a sharp cut in one movement.
  • Once the flooring has been cut, it is better to leave it for several days until it is completely level.

Important! If it is necessary to combine two pieces of flooring, then one layer is tightly overlapping the other and a quick precise cut is made with a sharp cutter. In such a joint should be perfectly flat. If it has a pattern, then before cutting it must be perfectly flat, so that there is no visible difference in the docking.

How to install and cut in sheet vinyl floors carpettoolz.com

Cut the cover in a different way

There are two other ways to trim linoleum evenly:

  • Drawing an even line with a pencil or other writing instrument and making the cut along the marked scythe line.
  • Putting the material close to the wall and running the knife right along the fold.

Cut curved shapes

It is good when the room is square or rectangular in shape, then you only need to cut a piece of the right shape and size from the roll cover, which can be done even with an ordinary knife. But if the room has decorative elements that can not be removed or pipes, you will have to try.

To cut the material indirect shape will need thick cardboard, which will be used as a pattern, and scissors.

In order to cut the linoleum for a pipe or other object that can not be removed from the room, it is necessary to make the shape of the pipe on cardboard, cut out, fit to it, trim, if necessary. Next, you need to make accurate measurements of the location of the pipe on the linoleum, attach the template to it and cut out.

Important! Linoleum is much easier to cut than other floor coverings such as laminate, parquet or tile. It’s also easy to install, so anyone can lay it themselves.

How to cut linoleum at home

To cut linoleum, it is not enough to take only a knife, you will also have to prepare a tape measure, an angle, a long ruler. In addition, for the template will need a sheet of paper or thick cardboard. Given that the linoleum canvas “does not forgive” mistakes, it is better to check all measurements not once, but several times for accuracy. The movements when cutting should be confident, with force.

See also  How to cut a trimmer without a jig saw. Metal

How to cut linoleum smoothly

To cut linoleum according to the size of the room was without any difficulty, and the cut was straight, you should familiarize yourself with some of the subtleties of this class of flooring. PVC is a fairly durable product, but if the edge of the sheet of sharp depressions or small cuts in the direction of the main part, there is a high probability of rapid damage to the material. Therefore, it is necessary to work very carefully, making an even cutting of the cloth.

Given that the linoleum of PVC is easy to cut a well-sharpened tool, all accidental movements should be excluded. Otherwise it may cause a deviation from the specified direction. You can avoid this by using a template or a long ruler for cutting.

Blades with uneven edges do not make the seam imperceptible

Since the method of cold chemical welding is used to join the two blades, they need to be cut with maximum precision. Thanks to this you can avoid pronounced seams, which strongly spoil the appearance of the entire floor. Before you start cutting linoleum cloth, be sure to check all measurements, the quality of sharpness of the cutting element.

Important! Begin to cut the flooring should only begin after its adaptation to the microclimate in a particular room, the material should take two days to get used to the temperature and humidity levels in the room. This is the only way to achieve a stable stiffness from the linoleum.

The work algorithm for cutting the entire length or width of the coating involves the following steps:

  • To mark on the inside or outside of the cloth fishing line, which will serve as a guide for cutting.
  • Apply a long ruler to this mowing line.
  • Cutting a sheet with a sharp knife.

How to trim linoleum on the walls

There are several ways to cut a floor covering close to a wall: with a trowel and knife, and by using only a sharp tool. The second option is considered faster and more effective, to cut in such a way you can and linoleum on the felted basis. To do this, you need:

  • Spread the linoleum in the room and let it “lie out”.
  • Press the material with your fingers and, step up from the crease 1.2 cm, start cutting at a 45-degree angle.

How to cut the linoleum under the baseboard

The technology of trimming the floor covering is similar to the previous one, it involves the following steps:

  • Install linoleum in the room.
  • Press it firmly to the floor, and 1 cm from the wall, cut off the excess.

How to measure, cut and install Linoleum floors Part 1 of 3

If the coating is cut close to the wall, then in the summer at high temperatures near the baseboards there will be a roll, which will be very noticeable.

How to cut the linoleum under the toilet

Instructions for trimming the finish covering laid on the floor under the toilet:

How to lay sheet vinyl flooring

  • Put the toilet bowl (without cistern) on the floor, but without the cuff and sealant. This is necessary to make a mark on the linoleum. Using a marker to outline the outline of the sole of the toilet, and then remove it.
  • Use a construction knife to cut the linoleum according to the markings. Install the toilet bowl in place and secure it with fasteners.

How to cut the linoleum under the pipe

Laying flooring around pipes. the process is not easy, here you need a special approach:

  • Undo the material with the wrong side on the pipe. Make a mark in the center of it. You will also need to measure the space from the wall to the pipe.
  • Using a compass or a pipe of similar diameter, draw a circle. Having put a piece of plywood under the material, you should make a straight cut with a sharp tool along the ruler.
  • Lay out the flooring and determine where the hole for the pipe will be located. It should be cut first a smaller size, and then on the spot to adjust.

How to trim the linoleum in the corners

There are their own difficulties in adjusting the size of the sheet in the corners. Here it is necessary to adhere to the following rules:

  • Press the linoleum, make a cut perpendicular to the floor, in the place where it “finds” the wall.
  • From it you need to make two cuts along the wall, but parallel to the base.

How to cut linoleum in a roll

To cut the flooring in a roll, you must:

  • Lay the material lengthwise to the room.
  • Cut off the excess part, gradually unrolling the roll, but at the same time need to twist the cut off part.

In order to avoid mistakes before starting work on the cutting of the material, you should measure the width of the room in several places, preferably in 3-5. As a basis take the largest figure. The tool must necessarily be with a well-sharpened blade.

Naturally, before trimming linoleum on the walls, it must be properly laid. This is not particularly difficult to do. It is important not to skip any of the steps to get a smooth and beautiful coating, which will serve you long. The order of laying is as follows:

  • Make sure the base is dry and clean.
  • Irregularities are removed. bumps need to be scraped, and pits and depressions should preferably be sealed with putty or plaster mixes. You need to lay sheets of plywood on your plank floors, which will create an even plane.
  • After the base is subjected to additional treatment, which usually no one wants to do. priming. It is better to do this, as it will save you from concrete dust and improve adhesion in cases where the flooring is laid by glue method.
  • Purchased linoleum unroll in the room where it will lie and leave in this form for a while to straighten the material and disappear corrugations left after unrolling the roll.

Next, the pieces are fitted to the substrate. If the area of the room does not exceed twenty-five square meters, the cloth can not fix anything. This works if there will be no more than two pieces. In other cases it is necessary to glue. In both cases, it is better to roll the cloths so that they slightly overlap the walls. This will allow you to more accurately align the pieces butt to butt and, if necessary, shift the cloths by a few millimeters. Do not increase the gap near the walls.

See also  How to remove the gear with an electric screwdriver motor

What to cut linoleum

If you decide to start making changes in your apartment, starting with the kitchen, you will definitely need to change or lay linoleum. The modern quality of materials allows the use of linoleum in the hallway or hall.

After taking the necessary measurements, you will be faced with the task of correctly cutting the material. It is on the quality and accuracy of the cut will depend on the appearance of the final work on the improvement of the floor of your room.

often than not, linoleum dealers suggest that you buy a special knife when you buy the material. Those who are not faced with the specifics of cutting this finishing material, mistakenly suggest that you can perform this operation with the help of improvised tools, which include knives (kitchen, pen, office), scissors (garden, tailor) and more.

Of course, there are specialized tools for such operations, the use of which guarantees you a high quality joints between the parts of the linoleum prepared for flooring.

The cutting technique of the linoleum itself also affects the quality of the connection of its individual parts. The easiest and most common way to cut the material equally, to eliminate gaps in the joints is to put the cutting edge of one piece of linoleum on the other “overlap. Make the cut at the same time both pieces of material, then you can avoid slots width of 1 mm or more.

Inaccurate joints between pieces of linoleum will lead to the accumulation of dirt in the gaps, which will lead to rapid wear and tear and damage the integrity of the entire coating. This cutting technique requires increased attention to the quality of the cutting surface, as any error made during this process will lead to damage to both pieces of material, and as a consequence, increased labor or financial costs.

How to cut linoleum?

The main types of cutting tools successfully used in linoleum cutting are of three types: retractable construction knife, flooring knife and linoleum cutting knife. Sometimes, in the absence of the above tools, a stationery knife may be used, provided a stock of interchangeable blades is used.

However, such a knife may only be suitable for cutting thin linoleum. It is necessary to try to keep the cutting angle with such a knife. Otherwise it is very likely that the knife will “run” sideways, and instead of even edge of the linoleum you are guaranteed to get the “fringe” effect on the edge of the material being cut.

The choice of tool for cutting linoleum depends very much on the thickness, density of the covering and the complexity of the shape to be given to the various parts of the material used.

A pull-out construction knife is better suited for cutting thicker types of linoleum, as it has a stronger construction than a stationary knife. Though the principle of construction at this knife is similar, however, thickness of a blade and directing elements are executed taking into account bigger load on a cutting surface.

This knife can cut linoleum of any thickness. The tool itself can be used for other functional tasks when renovating your apartment, but it won’t always cut accurately for the pieces of material that are butted together. Uneven seams can be very noticeable.

Knife for flooring is a very durable and easy-to-use tool that allows you to cut any type of coverings used in flooring. However, its technical execution will allow you to make a quality cut of the material only in a straight line.

Knife for cutting linoleum is a specialized tool with a fixed curved blade, designed to cut linoleum of any manufactured density. If it is on sale, it is better to opt for it. Represents a knife equipped with a front-loading retractable blade with several working positions.

How to properly cut linoleum?

When cutting linoleum, we will also need other tools: an angle, rulers of different lengths, a spatula with teeth. Order of cutting and laying linoleum:

To level the coating, the linoleum should roll out and leave to level for a while.

Cut blanks of material should take into account the allowance for cutting and shrinkage coverage (from 2 to 6 cm, depending on the length of the material).

After cutting the linoleum in finished pieces, they should be left for 4-5 days in the form of a pile of sheets, for complete straightening.

After straightening it is necessary to arrange pieces of linoleum on the floor and where necessary to fit, cutting small pieces of coating in places where there are protrusions, pipes and other utilities, pre-producing a marking on heavy paper, which will be used when cutting coverage as a molding.

You can resize the flooring directly on the floor if there are no additional protrusions in the room and the room has a regular shape.

Cut linoleum at the base of the corners should be “V-shaped”, pressing the floor with a ruler or corner, cut on the ruler.

If you use linoleum with a complicated visible pattern, perform the operation of cutting the material face up in order to assess the quality of the connection pattern of the overlapping coverage.

Linoleum should start cutting along the long ruler, starting on one side at the wall.

After cutting the first piece, secure the edge of the cut material with any heavy object. Over the finished piece, mark the jointing line. Place the next piece on top of the finished piece, cut through both along the planned mowing line, butt the new piece against the previous one.

A quality source material, the right tool, a precise cut, butt laying and a good fit for shrinkage will give you maximum satisfaction, and the room will fill with new colors. Your new floor covering also depends not only on the tool you choose, but also on your patience when cutting linoleum.

Related Posts

| Denial of responsibility | Contacts |RSS