Sawing a tree. What is better: with your own hands or hire a crew?
The first thing that comes to mind is to call specially trained people who will not just come and cut the plant, pick the stump and roots of the tree, but also take them away, so it is no longer a problem for you But such services can be quite expensive, especially if your site is far from large settlements and gardens.
But you can save on sawing trees and do it yourself. If the tree is large, it is best to take a chainsaw or an electric saw. the tool does not have to be bought at all, it is given out at special points for rent. It will reduce your manual, hard physical labor and save time. But you can also get by with normal, hand-held “pull-pull” saws.
How to correctly cut a tree in parts?
Lumberjacks ” How to cut a tree in parts?
Before we explain how to cut a tree in parts correctly, let us first clarify when it is dangerous to fell a tree completely at the root. According to the “Health and Safety at Work Regulations for Woodcutters and Lumberjacks,” a zone within 50 meters of a tree is a danger zone. That’s because when you’re felling a tree from the root, even a skilled tree feller can make the felled trunk fall in either direction. For example, because of a sudden gust of wind or, however small, rot inside it.
Fibers weakened by rot in the hollow-cut. the part of the cut left untouched by the chainsaw. tear before the healthy ones do, thus changing the fall path of the tree regardless of the operator’s calculation. It can happen that when a tree falls all together it pulls down another one, and the affected area radius is larger than the height of the felled tree. Felling a tree in parts reduces the risk of injury to a minimum.
There are many ways to remove trees gently, one at a time. And the more options the arborist knows, the easier it is to adapt the technology to the situation. However, the simplest and most common method is as follows.
With the help of special equipment (safety harness, steel leg spurs (gaffs in professional jargon), rope grip, carbines, trigger device and rope) the arborist climbs along the trunk. As it is lifted, it cuts off limbs and branches. Depending on the situation, the sawn wood either falls free (if there is nothing underneath) or is gently lowered with a rope. In the second case, a teammate helps the arborist work under the tree. And in general, it’s safer to work in pairs.
The main elements of an arborist’s equipment: harness, gaffes (on the legs), girth (around the trunk), rope, and a petrol-powered saw.
An arborist can climb quite high up the trunk: it depends on the strength of the tree. It’s better to let the sawn top down on a rope. Otherwise the slightest breeze will drift it to the wrong place during the fall.
The remaining tree trunk is sawn in pieces measuring 30 to 40 centimeters up to several meters in length. Size depends:
- From the amount of space under the tree.
- On the specific weight of the wood: the greater it is, the billets should be shorter. So it’s easier to throw them off.
From a height of 18-20 m an experienced arborist safely gets under the tree only one meter by one meter. But in this case the fallen logs should be put aside by your partner. Then the next ones won’t ricochet off the previous ones. And if the logs are thrown on a bed of sawn-off branches, not a single dent will be left on the ground, paving stones or lawn!
The shallower the arborist has to cut at the top, the slower the working speed. Sometimes when sawing off a very thick or heavy tree in several parts you have to cut off thin “pancakes” or to saw the wood along the grain right on the trunk.
Nothing heavy can be thrown on the paving stones under an oak tree. The arborist had to saw along the grain almost “by weight”.
The only way to safely cut down this poplar was to “pancake” it.
Before you start, you need to assess the following factors.
- State of the tree. Dry or alive? You can see if there are any signs of damage: slopes, rotting, cavities and so on.д.? On the one hand, dry wood is lighter. On the other hand, the wood must be strong enough. It should be able to withstand not only the weight of the arborist. an error, compared to the weight of the tree. but also the dynamic loads arising from lifting and sawing off at least the top.
- The diameter of the trunk. The thicker it is, the shorter the billets will be.
- Tree species. For example, the dense wood of oak or birch is much heavier than the same volume of pine or lime. And dry birch is more dangerous than dry pine. Birch bark is impervious to water. The tree stands as if wrapped in polyethylene, so the dried birch quickly becomes musty and brittle. By the way, for the same reason, to save the birch for firewood, “stumps” are better to chop at once, at least in half.
- Season. In winter, live trees shed water, the wood becomes lighter. The ground beneath them freezes, and therefore can withstand a heavy load.
But it is better to see once than to hear a hundred times! For example, after watching a two-minute video: “The profession of arborist”. filmed about our work on the First Channel for the TV show “Good Morning”.
Now you can imagine the process of felling trees in parts. Never try to saw a tree yourself if you have not first mastered the specialties of an industrial climber and a forestry worker! It is easier, safer and, in the end, cheaper to apply to the professionals. See for this service here.
How to cut a tree
It is not so easy to remove an old tree from the territory. You must have knowledge of how to cut a large tree, what tools to use, which safety precautions to adhere to.
Ways to cut down
There are several ways to cut a high tree. These include the following techniques for removing the old plant from the living area:
- A safe method of removing a tree that is in an emergency condition. This includes the removal of any sawdust that will be generated during the sawing process.
- Felling the whole tree at its natural growth angle. Work only on the ground. On the tree itself, first a wedge is made. It saws exactly the side where the plant will fall. Once the wedge is done, a base is made and the tree is pushed in the direction of its fall.
- Felling a whole tree using a pullback. The first thing the foreman, whose profession is called an arborist, climbs to the top of the tree and secures the pull there. Then all the work is done exactly as in the previous method. Only the angle of incidence is set artificially. It helps to do it with a pre-tensioned cord.
- Eliminating the tree piece by piece. This method involves the separate removal of branches. Then the trunk itself is cut down in parts. Pieces fall only with the support of a tuck in the right direction.
- Eliminating a tree in parts with the use of heavy equipment (truck hoist, truck crane).
- Felling a tree with the hanging of its individual pieces. After they are carefully lowered to the ground.
To choose the right method, you need to know the working conditions. There are different answers to the question of how to cut down a tree near the house, on the dacha or on the property. Does not always allow space to use technique in the work. Whole tree felling can be used if it is a question of how to cut down a tree on your property. However, there are limitations here as well. The area must be large enough in size. Nearby residential buildings should not be built.
If there is difficulty in choosing the right way to remove an old tree, it is better to use the opinion of an expert. The first thing to do is to get an appraiser. It will help to decide how to cut down a tall tree in parts or whole, what to use for this, how to most economically carry out all the proper work. Only then is the work crew invited and the work begins.
What tools you need for the job?
Once it has been decided how to cut a tree, you need to prepare all the proper tools. Every worker involved in a project should have them.
- Work uniforms;
- Reinforced boots;
- A helmet that is equipped with a protective shield;
- String or twine for pulling, cutting branches;
- A plastic or wooden wedge.
Deciding how to cut down a tree in your yard is not enough; you need to know all the safety rules for such work.
- Never operate a chainsaw with one hand. Always hold on to it with both hands. And, the thumb of the main hand should always be under the handle of the tool.
- Don’t saw the tree with the end of the cutting blade. This will cause a lot of vibration and increase the risk of serious injury.
- Smoking while working with tools is strictly prohibited.
- You should not leave a chainsaw where there are animals or children around.
Big Oak Rigging Over a House
How to cut down a tree on your property, you can learn from special literature. In practice, however, theory often does not work. Only experienced craftsmen can tell you the secrets of how to cut down a tree with a saw in the shortest possible time, with the least amount of effort and time.
Is it possible to saw trees on the site and how not to earn a fine for it
If you have recently become the owner of a plot of land, you probably now plan to begin to equip your country estate to your liking as soon as possible. But on the way to the dream can meet barriers, overshadowing the joy of creating a “new world”. This happens when a land plot is overgrown with trees and bushes. In this case, do not immediately grab the saw and axe: it can be fraught with unpleasant consequences.
How to clear your land from woody vegetation?
Where and when is it necessary to remove?
In itself, such a tree is not a problem. But if it is an emergency tree, it can do a lot of damage if it falls. A fallen tree can easily tear down wires and poles, ram roofs and building walls, break traffic and block roadways. Not to mention the threat to human health and life! Therefore, in the city such plants should be removed if they grow:
In the countryside you can often see large and dry trees. Sometimes they overhang the house, risking falling at the slightest breeze. On top of everything else, dry trees are a fire hazard. Solitary tall plants, not necessarily dry, can also pose a threat.
If a neighbor’s tree is in the way, can I cut it down??
Sometimes trees behind a neighbor’s fence are a potential hazard or nuisance. If they are closer to the fence than established by SNIP regulations, they can severely shade your area or, if broken, even threaten to fall on your property.
Unfortunately, you cannot get permission to cut down an obstructing tree on your neighbor’s property. In any case, the issue will have to resolve with the neighbor.
It is not always possible to reach a compromise. If the agreement in the neighborhood did not work, you can act officially:
- Write a letter to the owner of the neighboring plot, where you describe the problem in detail and your request to remove the tree. It is advisable to send it by registered mail, keeping a copy;
- If your neighbor refuses, the next step is to contact the board of the HOA (if the land is in a dacha community) or the Department of Landscaping (for areas with the status of a residential property).
If this does not produce results either, you can contact the prosecutor’s office.
Cutting down trees: step-by-step instructions
Cutting down trees on the plot is a hot topic for any gardener. The need to remove a tree may arise for a variety of reasons: too large and close to the house, danger of the dried out trunk falling, excessive shading, etc.д. Regardless of the reason, it is necessary to know the rules of cutting down trees and follow safety procedures.
- Machinery and tools
- Chainsaw work
- Sawing technique
- The size of the tree
- Uprooting techniques
- Uprooting difficult trees
- Chemical removal
Cut down a dry tree
I have a 50 year old larch tree in my yard, do large dry knots fall from the tree, can I cut it down?
If you saw a dry tree in the forest, what would happen??
What company can help cut down a dry tree behind a neighbor’s fence. I own the land. A dry tree can fall on a declared building (a bathhouse)
How to cut down a dry tree if it is in the territory of a kindergarten.
There is a dry tree in the yard, it may soon collapse on cars and power lines. Who should cut down the tree and to whom to apply??
Does the building superintendent have the right to unilaterally decide to cut down the tree? Of the three old trees (dry, semi-dry and green) it is the green tree was cut down to the second floor level at the request of the building manager.к. The branches were in the way on the balconies. These branches were removed, then someone decided to cut down the tree completely. The tree is 40 years old, it grows close to the wall (the distance between the neighboring houses 10 meters).
I want to cut down a separately growing dry tree on the municipal territory. I can be punished.? And how can they punish?
How can I cut down a dry tree? What documents do I need and where can I get them?
Who needs to cut down an emergency tree in front of the house Dried branches of a huge size are falling down.
How to cut tree near house without chainsaw. Pt 1
Do I have the right to cut down a dry tree on my private property (Rostov region)? Give me a link to the article. Thank you.
I live in a block of apartments. Who has to cut down a dry tree behind my property? Me or the Village Hall.
We have created an HOA in an apartment building. There is a dry tree in the yard. Where to go to get permission to cut it down?
We have an apartment building with a dry tree near it which needs to be cut down. The head of the local administration told us to prepare a deed to cut the tree with the signatures of the residents and the deputies living there and we can cut it down. I would like to know how to make it correctly so that then did not have to pay the fine.
We are a budgetary institution, on our ground area it is necessary to cut down a dry tree. We have an unlimited use of the land. Of course we will ask our city administration for permission to cut it down. Are we obliged to cut down the tree at our expense or will it be at the expense of the city administration?
Who is obligated to cut down a dry very emergency tree that grows behind a grave fence, the roots have already emerged from the ground, the tree is bent over and is only held by a nearby living tree. It is impossible to approach the grave, t.к. at any moment the tree can fall down and crush. If it falls, several monuments and fences will be destroyed. What law should be referred to when writing an application to the city administration?
How to cut a Tree down close to a house
We want to cut down a dry tree (growing at a slope) in our cemetery plot bypassing the administration (a private company takes three times cheaper). How to do it?
I want to know if I bought a house with a plot of land in front of the house is a large dry tree, can I cut it down or where do I have to ask for permission?
The tree is right up against the wall of my garage is a dry tree, the height of 20-25 meters. Could fall at any moment. I can’t cut it down myself. The area where the tree is located. It is a school or a boiler house on my property. I do not know exactly. The garage and the land under it are privatized. Who must remove the tree??
Our company “Clean City” LLC deals with cleaning of such trees.
Can not the local administration oblige me to remove the tree (or rather, to pay to remove the tree) on the grounds that this tree is close to my garage?
There is a dry tree right up against my garage wall and it is about 20-25 meters high. It could fall at any moment. I can not cut it down myself. The area where the tree is located. It’s a schoolyard or a boiler plant nearby. I don’t know exactly. The garage and the land under it are privatized. Who has to remove the tree??
We have the cleaning of such trees engaged in LLC “Clean City”.
Can’t the local government require me to remove this tree (or rather, require me to pay to remove this tree) on the grounds that this tree is right up against my garage?
I went to the woods to cut down a dry tree. Someone saw, called the police. Cut down, downloaded. A policeman came and said that it is a criminal offense. What will happen now?
The branches from the tree on my neighbor’s property are on my roof. The branches are dry, there is a danger of damage to the slate. Tree cutting services are expensive, and I am a pensioner, how can I get my neighbor to cut down the branches? The tree is a fruit tree. mulberry. You don’t need a special permit to cut it down, and the tree is right above the gas line, so you can complain to the gas company and let them fight with your neighbor?
There’s a dry tree right up against my garage wall, it’s 20-25 meters tall. Can fall off at any time. Can’t cut it down myself. The area where the tree is located. Is it a schoolyard or a boiler plant nearby? I do not know exactly. The garage and the land under it are privatized. Who should remove the tree??
There is a dry tree standing five or seven meters from my shopping center (between the shopping center and the road) It is not my property. Who should cut it down?? The township administration refuses to.
Please I live in a private house I Walk along the Asphalt driveway behind the fence and there is a playground behind the driveway a Walnut Tree is growing I want to cut it down I have the right or I need a permission to cut it down? The tree is not dry! Thanks in advance!
I have this question. My mom has a private house in the village with two owners. There is a large dry tree on the neighbor’s side, which at any time from the wind could fall to her side, as well as on ours. Please advise how to get the neighbors to cut down the tree? After all, if a tree falls on our roof, it will break it.Thanks.
A neighbor has an emergency dry pine tree 30 meters high on his garden plot. We were asked to cut it down, t.к. in case the tree falls on our property. My neighbor has asked him to do it more than once. He says he won’t be responsible for anything.к. It is not his fault that it is dry. In fact, you need a permit to cut it down, and the tree is not his and not his responsibility. Question-Will the neighbor be financially responsible if the tree falls and causes material damage to us and the neighbors?
At 6:30 this morning, my mother and I woke up to a terrible and loud rumbling. A dry tree limb fell on the plastic window and there is a big crack. Dry knots have been asking the resident of an 8-apartment building to cut them down for over a year, but he has been refused. Can you tell me if it is possible to go to court for damages??
Need to cut down 2 trees that are not dry but are blocking the view, willing to plant some new trees in return, asking on behalf of a legal entity, where to write a request.
On the territory of the school is a dry tree absolutely. It’s cracked in the bad weather. To avoid accidents, it must be cut down during the vacations. How do I draw up a proper report on the cutting?? Thank you.
Respectfully Mitrokhina Liana Vartanovna. Deputy. The tree is absolutely dry on the school grounds.
In the yard of our house there are a lot of dry and damaged trees that pose a danger to others. In the fall of 2013 a tree fell on my balcony, damaging all the glass, in the summer of 2014 a tree fell on the sidewalk, no one was accidentally hurt. Repeatedly applied to the management company with requests to cut down dead trees, but to no avail.
Choice of tool
The key factor in choosing a chainsaw is the size of the bar. The length of the bar and the power of the chainsaw depend on the diameter of the tree.
The chainsaw should be chosen for the job, taking into account the peculiarities of the tree
thin trunk (diameter up to 35 cm) and medium trunk (diameter between 35 and 65 cm) can easily be cut down with a chainsaw with a guide bar length of 40 cm. For trunks over 65 cm in diameter we advise to use a more powerful chainsaw with a bar length of at least 45 cm.