How to correctly fit burrs to a cultivator

Conclusion

Cutter is an attachment. It can be removed and put back. It affects the quality of cultivation of any type of soil in the garden and vegetable garden. The quality of engine work also depends on the quality and condition of the tiller.

You can easily assemble the tiller on a single-axle tractor yourself.

If assembled and sharpened properly, you can loosen the soil and remove weeds from it very quickly. How to assemble the tiller correctly? It is necessary to make good blades. This is the basis of any type of cutter. It is the blades that are designed to deal with weeds, loosen the soil, and distribute fertilizer in the soil.

correctly, cultivator

Cultivator

There are several types of this attachment, but the most common are the saber and goose feet. They are used to perform most of the work on the plot. On the ends of the structure plates are installed on the tillers for the power tiller. They make the machine run particularly smoothly and do not allow it to dig deep into the ground.

How to work with power tillers video

Beginning farmers often encounter problems caused by improper operation of the cultivator. It is not uncommon for a power tiller to be buried in the ground, and does not lend itself to any manipulation by the operator. To solve this problem, the first thing to do is to understand the causes of the problem.

If the cultivator is buried when plowing, it is due to several reasons.

  • it is often connected with the equipment. Most often mini-cultivators are equipped with four tillers. Provided the manufacturer uses quality metal to make them, they will have a lot of weight. Because of this, the working elements will pull the cultivator into the soil;
  • sharp cutter blades. if the cutting elements are sharpened, the cultivator will not move forward, but instead will dig into the ground;
  • High load on the engine. in this case, the engine will create strong vibrations, which will upset the balance. This will cause the cultivator to go deeper into the ground in place instead of moving around the vegetable garden;
  • The second most common cause is that the cultivator is not moved into second gear in time. This should not be done when plowing loose soil and in conditions of high moisture;
  • A cultivator often gets buried because of improperly installed tillers. If you choose a greater angle to attach them to the coupling mechanism than required by the application manual, it will also cause the equipment to bury.
See also  Laser cutting plywood with your own hands. Finishing and painting

Very often the technique is buried in the ground because of too diligent pushing by the operator. The owner must remember that it requires only a slight nudge of the technique in the right direction. If too much force is applied, the balance of the cultivator will be upset and the cultivator will dig into the soil all the time.

correctly, cultivator

Do I have to sharpen my cultivator tines?

To begin with, it is necessary to understand what is a cultivator. How it is designed and what it is needed for. So, this is a type of compact agricultural equipment designed for preplanting soil preparation. Tillage is a great way to plow, loosen, and dill the ground, as well as to make furrows and harrow. This unit allows you to greatly facilitate agricultural work on the dacha or homestead plot. A power tiller is capable of working in places where full-sized equipment is not accessible

Cultivators are divided into groups according to the type of mechanism:

  • mechanical manual. They are used as additional equipment to more serious equipment. Digging the soil to a depth of no more than 5 cm and remove only weak, located on the very surface, weeds;
  • Electric. Lightweight, maneuverable equipment that is used on limited areas of land. The disadvantage is to work from the electric cord;
  • cordless. This type of agricultural equipment is a combination of all the advantages of electric counterparts with autonomy. They are heavier, but at the same time, mobile and safe;
  • petrol. This equipment is distinguished by its power, productivity and high weight. A good option for cultivating vast plots of land.
See also  Which cultivator is better with electric or gasoline?

Motor cultivator with gasoline engine

Cultivators of any type consist of basic elements such as a frame, control levers, engine, rotor, wheels and cultivation devices (cutters).

Why cultivator cutters dig into the ground?

Beginning farmers often encounter problems caused by improper operation of the cultivator. Often a motokultivator is buried in the ground, and does not lend itself to any manipulation by the operator. To solve this problem, first of all, you should deal with the causes of its occurrence.

correctly, cultivator

If the cultivator is buried during plowing, it is due to several reasons.

  • This is often due to the equipment set. Most often, mini-cultivators are equipped with four cutters. Provided the manufacturer has used quality metal for their manufacture, they will have a lot of weight. Because of this, the working elements will pull the cultivator into the soil;
  • sharp cutter blades. if the cutting elements are sharpened, the cultivator will not move forward, but on the contrary, it will dig into the ground;
  • High load on the engine. in such a case, the engine will create strong vibrations, which will upset the balance. Because of this, the cultivator will become deep into the ground in place, instead of moving around the vegetable garden;
  • The second common cause is untimely switching of the cultivator to the second speed. This should not be done when plowing loose soil and in conditions of high humidity;
  • the cultivator is often buried due to improperly installed tillers. If you choose a greater angle for attaching them to the hitch than required by the application manual, this will also cause the machine to dig in.

Very often the machinery is buried by overzealous pushing on the part of the operator. The owner must remember that only a slight nudge of the machine in the right direction is required. If you apply too much force, it will upset the balance of the cultivator, and it will dig into the soil all the time.

Related Posts

| Denial of responsibility | Contacts |RSS