How the cartridge is disassembled on a perforator. Cartridge for a perforator: how to remove, disassemble and replace?

Peorator repair: how to disassemble and assemble a peorator with your own hands

Any Peorator, be it bison, Interskol, Metabo, Bort (board), Bosch (Bosch), Dewalt (Dewalt), Hitachi, Makita, Sparky, you need to properly operate, treats it carefully, timely prevention. Когда случаются поломки, некоторые из них можно устранить самостоятельно, но для этого нужно знать, как разобрать пеоратор, а потом как собрать пеоратор.

This tool is used for shock works, when removing old solid but fragile materials: brickwork, concrete, tiles. Before disassemble the peorator Makita, Sturm (Sturm), Elitech (Elitech), Enkor, Worthy, Dexter, Wert, AEG, etc.D., you need to know what it consists of.

Different models of the tools from each other are characterized by power and performed functions, but in all there are mandatory main systems and nodes.

  • an electric motor with an anchor and a stator;
  • gearbox;
  • cartridge;
  • shock mechanism;
  • power button;
  • Surprising coupling.

In the process of improvement, additional functions appeared that facilitate its application:

  • operating mode switch;
  • vibration system;
  • a mechanism that fixes the tool in a position convenient for the operator;
  • limiter of the depth of penetration of equipment into the work surface;
  • Dust cleaning of the device.
cartridge, perforator, remove, disassemble

The equipment is special tooth and shock drills. which are installed in the cartridge.

The pedulator works due to the fact that the rotation of the engine turns into a shock-revitalizing movement of the nozzle. The motor drives the rest of the tool mechanism. User safety during operation provides a safety coupling. The piston drives a drunk bearing. He creates a shock effort. The peorator cannot serve forever, and its details and nodes break.

The reasons for jamming the drill in the penetrator

The need to remove the drill from the penetrator occurs when the nozzle is replaced, but sometimes it is impossible. The reason for the wedge is the use of cheap drilling tips. Typically, from the end of the shank they are flooded by a boy (shock bolt), because they are made of low.quality metal, which is not able to withstand high shock loads. They also bend, twist, break and amenable to other mechanical deformations.

Damaged shank.

Instruments

For professionals in their field, replacement or repair of the infantry cartridge is not difficult. However, what to do to those who are not engaged in construction and repair at a professional level? Since any man in his life at least once held a drill in his hands, he must be aware of the process of removal, as well as replacing her cartridge. At the same time, the reasons can be very different, starting with the slowed work of the gear rim and ending with large breakdown. How to change the cartridge on the oorater? Consider the replacement in more detail.

Replacement of the cartridge on the oorator begins with the study of fasteners. He can hold on a screw rod or spindle. In most cases, it is not difficult to remove the cartridge. However, sometimes there is a stronger fixation, which will require patience and additional tools. In a simplified version, a tightly fixed cartridge is removed by means of a hammer, a key and screwdrivers. The removal process is as follows:

How a regular drill is inserted into the infantry cartridge and why is it necessary

It is impossible to install a pierces for a drill in the infantry cartridge. In the equipment of the drill you can clamp the nozzle from the peorator, but such work will not be effective. Perhaps you have not yet known, but the effectiveness of the work is affected by such an indicator as the straightforwardness of the drill movement. If in the infantry cartridge the drill is centered due to the special design of the slots, then in the drill the clamp is ensured by compressing the sponges. These sponges are intended for compressing only cylindrical shanks. If you put the drill in the drill, then when it rotates it can be replaced that it rotates with a great deviation from the axis.

See also  Cutting an aperture in a bearing wall. Stages of relocating a door opening in a load-bearing wall

This deviation negatively affects the process of performing work, so it is not recommended to use a drill from a pedorator in a drill design. In the cartridge of the tool under consideration, you can fix the drill, and usually such a need arises quite often. This may be the need to drill holes in a tree or metal, so how to fix a drill in a pedorator, we will figure it out further.

cartridge, perforator, remove, disassemble

To install a drill in a peorator, you will need to buy a special adapter or adapter. You can choose them in the online store cylinder. The adapter consists of two parts:

We get the finished equipment, which will allow the use of drill from the drifts on the ashorator. As you can see, everything is quite simple, and the price of such an adapter is not high. If there is no drill or not the desire to remove the equipment from it, then you can, together with the adapter, purchase a new zang cartridge. This will allow, if necessary, it will always be able to quickly fix the nozzle in the cartridge for the drill.

To install a drill in a peorator, you will need to buy a special adapter or adapter. You can choose them in the online store cylinder. The adapter consists of two parts:

Assembly of the infantry cartridge

To assemble the device, the actions performed during dismantling are repeated in the reverse order.

  • Washed, cleaned or new details are lubricated with silicone lubricant like WD-40.
  • A seal, sealing gum are placed in place. The inside is placed in the sleeve so that the holes for the codes coincide.

You can install the nozzle and check the quality of maintenance of the cartridge. In cartridges from different manufacturers, the disassembly process may differ slightly due to the presence of additional goals and gaskets.

Instruments

For professionals in their field, replacement or repair of the infantry cartridge is not difficult. However, what to do to those who are not engaged in construction and repair at a professional level? Since any man in his life at least once held a drill in his hands, he must be aware of the process of removal, as well as replacing her cartridge. At the same time, the reasons can be very different, starting with the slowed work of the gear rim and ending with large breakdown. How to change the cartridge on the oorater? Consider the replacement in more detail.

At the first stage, it is worth determining which cartridge is used directly in your pedorator. They are cams, cangy SDS and quick.sounding. The latter, in turn, are one- and two-gyls. In a fist cartridge, the drill is fixed using the key, which cannot be said about the cangs of SDS and the quickly ascense. In order to replace the drill in the canovy SDS cartridge, you just need to crank.

Все неопытные мастера допускают эту ошибку! �� Как не сломать инструмент при ремонте!

Replacement of the cartridge on the oorator begins with the study of fasteners. He can hold on a screw rod or spindle. In most cases, it is not difficult to remove the cartridge. However, sometimes there is a stronger fixation, which will require patience and additional tools. In a simplified version, a tightly fixed cartridge is removed by means of a hammer, a key and screwdrivers. The removal process is as follows:

Why is the drill not fixed

If the drill is reliably inserted, then the assembly is carried out correctly, and all parts of the mechanism are suitable for further operation. But it also happens that he is playing. The main reasons are as follows:

  • The case is worn;
  • Stop plates broke;
  • The ball is and the ball;
  • The lock spring weakened or broke;
  • The lubricant was dry or thickened from dirt.

Next arises the question of whether the replacement of the cartridge on the Makita pedorator is needed or it is enough to carry out repairs. Restoring work will help only if the balls are worn out and the lubrication is replaced. If the reasons for the instability of the drill are different, it is easier to purchase a new cartridge and put it according to the instructions described above.

Types of cartridges for the penetrator

The peniterators can use different types of cartridges. Everyone has their own differences.

Tozhcato-Vennian

It is also called a key cartridge. This variety allows you to install a nozzle in which the shape of the shank is cylindrical. The mount is carried out using a special slot key. They are shifted by fists that reliably clamp the working organ. The plus of a gear-cage cartridge is a reliable fixation of devices with a cylindrical and hexagonal tail. But in order to fix or remove the drill in these cartridges, you need to spend a lot of time.

See also  How to remove the clutch on the tiller

Quickly joke

Quickly and fast.and.packed are mainly used in the design of screwdrivers. There are one.flair and two.lump. Are fixed in the same way as key, only without using the key, everything is done manually. A more reliable mount is provided by two.luminous cartridges. But since the clamp is performed with hands. in reliability, fixation is inferior to the press with the key.

The disadvantage of the fast.fastenced fastener is that with long operation, it unreliably fixes the drill of large diameter. As a result, during the drilling, the instrument turns, which negatively affects the quality and speed of work.

Such a variety is considered the best option for peorators, although it appeared not so long ago. Many people call SDS-patrons quickly. They are suitable for drilling concrete, drilling wood and metal. But their clamping equipment can be of different types, therefore you need to know their features.

Equipped with several types of clamping devices:

  • Plus. The tail of the cartridge of the tool designed for use at home.
  • Top and Quick. Very rarely used. Buy nozzles for installation on such types of cartridges is not easy. Few firms are engaged in their production. Therefore, when buying, you should look at the modification of the latch.
  • Max. These details are used only in specialized pedarators models.

The cartridge for the penetrator reliably fasten the drill. Fixation is carried out using 2 guide wedges and 2 stop balls. The advantages of SDS cartridges are that working with a clamping device is simple and safe. It perfectly combines torque and shock force. 90% of all manufactured peorators are equipped with these simple devices.

Reliable fixing the shank is a guarantee of effective and high.quality work.

A cartridge for a pedorator for a drill. to understand the device, change

Almost every person has a drill. The tool will help to drill a hole on any surface. So, we will not replace in construction and finishing work, any type of repair of the room.

Reliable and uninterrupted operation of the device is carried out by a cartridge in which a drill, drill or chisel is attached. It is this element that most often fails with prolonged use of the tool.

Accordingly, it is important to choose the right cartridge for the pedorator for the drill, be able to remove, replace the clamping device.

Cartridge: simple design. a key to long work

The first peorator was released by the German company Bosh in the 1930s. The apparatus immediately liked the masterful men, they appreciated his universalism and indispensability. After all, the tool allows you to not just drill a hole. Impulse deterrence that he provides, accelerates and simplifies the work carried out.

With the help of the cartridge, the drill on the pedorator is fixed

In the design of the tool, an important role is given to a clamping device that fixes the drill or drill. However, it is the cartridge of the penetrator that turns out to be an unreliable element of the structure. He quickly fails due to the fact that it is on him that the main volume of shock force falls on.

After some experiments, the manufacturers understood: a simple device of the infantry cartridge is the key to a long operation of the element, is less subject to destruction during operation. And therefore, experimentally came to the creation of three main types of this detail.

It is considered a classic type. This species is also called key. And they call it not by chance. To use it, you need a key that helps to fix the working nozzle.

This key compresses and unclenches the mounting mechanism inside the part. Like fingers in a fist. they are unclenched and contracted, so this species is sometimes called cam. These fingers clamp the rod of the drill.

This method of clamp is considered very reliable.

Cleaning Behind the Converter Piston Seal

The drill is attached to the cartridge using a cartridge key

To change the drill, a drill, a chisel in this variety of a cartridge for a peorator will require not only a special key, also a certain period of time. With a clamp element of this type you will have to tinker. Fist clamping devices work with a cylindrical or hexagonal shank drill.

Tip: Attach the cartridge key to the tool cord. So the key will not be lost and will always be at hand.

See also  How to remove dust from the walls after sanding

up to several thousand. The price depends on the diameter of the element (10, 13, 16 millimeters).

The production details of the German company “Hortz” have proven themselves well. Some of them are produced marked “Pro”. intended for professionals.

Another German company Matrix produces gear-inventory clamping devices. True, Chinese factories supply them to the Russian market. For various types of drills, the clamping device “Attack” is suitable. These are domestic products, although the Chinese often produce it.

Quick.packed elements

Such a cartridge for a peorator is easy to use. And a special key to work with it does not need. It is enough to clamp the mechanism of the device with your hands, and the nozzle is ready to work. A fast-packed cartridge for a peorator is produced two types: one- or two-lump.

cartridge, perforator, remove, disassemble

The rapidly packed cartridge is installed on the peorator very easily

One hand. and no additional efforts. On this principle, one.way clamping devices work. They can only be installed on those drunks where the automatic blocking of the working shaft is technically implemented. The principle of operation of the device is simple. The tail of the nozzle is clamped by manual rotation of the adjusting sleeve. Turned several times. and ready.

It will be more difficult to cope with a two.shirt analogue to handle the master. Both hands will be used. by the number of couplings. When the front coupling rotates clockwise, the rear must be kept in a stationary state.

The disadvantage of this type of fastening element is that with prolonged operation, it unreliably fixes the drill of large diameter. Accordingly, during drilling, the tool may turn out, which affects the quality and speed of work. The fast.sounding element perfectly fixes the nozzles with a diameter of 1 to 25 mm.

Bosch, Hammer, Dremel, Fit are considered leading manufacturers of fast.and.packed devices.

The choice of a specific model of a clamping device depends on those types of work that will be carried out using a drill, as well as on the model and capabilities of the tool itself.

SDS start: insert, turn, fix it

This type of clamping device appeared relatively recently-in the 80s of the last century. And is considered the optimal mount for peorators. Accordingly, most of the tools are equipped with them.

The SDS infantry cartridge is reliable in operation, easy to handle

The SDS infantry cartridge has a number of advantages. Reliable fastening of the drill, which is fixed using two guide wedges, two locking balls. Simple and safe work with a clamping device. Perfect combination of torque and shock force.

Climeing devices of this type are five types. ordinary and with special categories:

Removing the cartridge on the thread, with a reverse screw

In order to remove the cartridge from the axis, we first need to turn out the central screw. In order to get access to it, you need to push the fists to the stop. After that, stick in the inside of the Gaikovyrt or the screwdriver with a sharp movement to “pull” it. Left.hand. The screw itself is filled with sealant, and it is very difficult to crank.

Apart from this, it should be noted that in the work it is worth using a high.quality tool. When working with a Chinese screwdriver, I just broke the slot. With all this, the screw itself remained in an untouched position. Only helped a screw on the screw, after which the head was folded from the place and the process went. After twisting the screw, it is necessary to remove the cartridge case itself.

Then it is necessary to twist the cartridge itself from the thread. In this case, the thread is right, a flip screw. It is very difficult to disrupt the thread, because during work it “takes up”. A significant application of effort is required, but the process can be accelerated.

In this case, you can use the player-packed key in the cartridge. This will allow the lever to lengthen, and in the presence of “reverse” use the tool itself. To use the tool, you need to either squeeze the hexagon in a vice, and turn it on, or hit it on the table when rotating at small speeds.

Related Posts

| Denial of responsibility | Contacts |RSS