Hacksaw for chipboard which one is better

best hacksaws

Review of the best according to the expertology editorial board.ru. Selection criteria. This material is subjective, not an advertisement and does not serve as a guide to purchase. Before buying it, it is necessary to consult with a specialist.

Despite an abundance of electric tools for cutting materials, traditional hacksaws are also used in human activities. With their help you can quickly cut most different density of workpieces. There is no need to unwind the electric wire, to fill the equipment with gasoline, the tool does not take up much space in the trunk of the car. Low price allows to have hand tools not only for professionals, but also for home craftsmen. Today there are many different models, expert advice will help you make the right choice.

Best hacksaw ranking

Category Location Name Rating
The best wood hacksaws 1 BAHCO Superior 2600-16-XT11-HP 9.9 / 10
2 Gross Piranha 24107 9.4 / 10
3 Armero A531/400 9.1 / 10
Best Metal Saws 1 Norgau N403 9.8 / 10
2 Kraftool 15802_z01 9.6 / 10
Best folding hacksaws 1 BAHCO 396-LAP 9.8 / 10
2 FISKARS Xtract SW 75 9.7 / 10
Best hacksaw 1 BAHCO ProfCut PC-12-COM 9.8 / 10
2 STANLEY FatMax 2-17-205 9.7 / 10
Best Japanese Saws 1 STANLEY FatMax 0-20-331 9.6 / 10

BAHCO Superior 2600-16-XT11-HP

Our top hacksaw ranking is the BAHCO Superior 2600-16-XT11-HP. Even if you have never heard of this Swedish company, you are still familiar with its products. Have you ever seen a gas wrench?? This was invented by Juhan Johansson, the founder of Enköpings Mekaniska Verkstad, at the end of the 19th century. Well, the company which he founded and which changed its name first to BA Hjort Co, then to AB Bahco (it’s already clear where the name came from) remains to this day one of the world’s leading manufacturers of hand tools.

Tired of “purely Chinese” or “sort of European” saws? Well, Bahco Superior proudly displays the inscription “Made in Sweden” on the blade. But the blades themselves, as well as the handles, the company offers separately. that is, this particular model is, in fact, a factory “construction set” of a 400 millimeter Superior blade (pitch. 11 tines per inch) and the handle of ERGO. Blade made of tool steel has protective coating with good sliding properties: the saw blade cuts easy and is not threatened by rust. With one “but.”. if you cut wood longitudinally, the blade will scuff up without a camber (because of the narrow gap), wiping off the coating, too. The handle is comfortable and ERGOonomic, so it lives up to its name. There are three angles of blade setting in the construction, to reset you will need to turn the screws (which are also three). And if you want to assemble “construction set” by yourself you can buy renewed handles ERGO. now the company produces them with more anatomic shape (for left-handed and right-handed users separately), in several sizes for different hands and with quick blade removal.

The blade has good stiffness, it does not “play” while working. over it did not require an excessive increase in thickness and therefore weight. the saw did not even reach half a kilogram. In general, it is not a cheap hacksaw, but it is of really high quality.

Excellent professional fine-toothed hacksaw. I also sawed oak, but I still do not need to sharpen the teeth.

Gross Piranha 24107

And now let’s move from “real Europeans” to “kind of Europeans”. Although the advertisers talk about “European quality, etc.д. etc.п.”But don’t despair: tools under this trademark are made in China and the mentioning of the only Russian-speaking site of the company “World of Tools” on the blade unambiguously hints at the fact that this “German” hacksaw is made to order of a concrete distributor in Russia.

Be that as it may, this hacksaw is not bad at all, its design is similar to Bahco in many respects: ergonomic two-component handle, blade with narrow rails and pitch 11-12 TPI. Claimed material of the blade is high-carbon SK-5 tool steel (though its analog is more likely to be China), which holds sharpening well, blade coating is Teflon. The manufacturer offers a line of different blades to fit its standard fixture, so you can add a few more to this hacksaw.

In the work it is quite convenient, if (as in the case of Bahco) not to get carried away with the longitudinal sawing. but if the Swedish hacksaw is mainly affected by the blade mashing, here, it seems, and the tooth shape is not so successful. Is the “Piranha” worth its money?? Basically yes. it is almost half the price of Bahco, but not half the price.

I like the hacksaw. It’s convenient to cut, Teflon holds well. it rubs off only if it bites, and you’re still trying to cut with it.

Armero A531/400

We’ve already encountered this brand before in our ratings: a “sort of Spanish” company with the official website in the domain zone.es for some reason is only written in Spanish and Russian and is hosted in St. Petersburg. So it’s not hard to guess the real origin of the hacksaw. But if we abstract from the “Abibas biography” the hacksaw is really good for its money.

See also  What's better than okla or neva single axle tractor

Lightweight hacksaw with an ergonomic handle has a 400 millimeter blade with 9 teeth per inch (as is also clear from the marking). Claimed material of the blade is the same steel SK-5 as Gross let’s believe it: in practice the blade shows good results. So why is a hacksaw almost twice as cheap as a Piranha?? There are essentially two critical differences: no Teflon coating and fixed handle. The former is even more practical in some cases (you won’t get your cutting trimmer line dirty when mashing the blade), but you’ll have to put up with the latter. But have you moved the handle on the hacksaw at different angles so often?

Review of the best wood hacksaws

There are a wide range of wood saws on the market. Among them there are both domestic and foreign made products that have proven themselves with the best side.

Saws “Zubr Expert”. universal tool that can perform both longitudinal and cross cutting of wood. The 40 cm long blade has specially hardened and bent teeth with a 5 mm pitch pattern.

The Banco Laplander 396-LAP miniature saw is specially designed for use in hiking conditions. Narrow, pointed blade with Sandvik XT teeth for a quality cut both lengthwise and crosswise. When folded, the length of the hacksaw is 23 cm, and it weighs only 200 g.

Japanese Saw V.S. Western Saw. Which Cuts Faster?

The blade of Gross Piranha hacksaw is made of high-quality steel with hardness of HRC 52. That said, the teeth, hardened to HRC 66, have a laser-ground triangular shape and are coated with Teflon, whose use improves blade slip and a clean cut.

When choosing a hacksaw, you should pay attention to its marking, study its parameters and, if something is unclear, ask the salesperson for details. After purchase, the tool should be taken care of, clean it after work, store it in a dry place, sharpen it and perform adjustments if necessary. Only then will it last as long as possible.

All about choosing a wood hacksaw

Today there are different modifications of the product, each of them designed for a certain kind of work. That’s why the choice is complicated. Let’s understand what to look for when choosing a hacksaw.

Hacksaw blade

The blade is the main element of the tool and determines its performance. The length of the blade is important. It can be in the range from 25 to 50 cm. The longer the blade, the larger elements the hacksaw cuts. The effort in this case it will be necessary to apply less. But there is a disadvantage: a long blade more springy, which is uncomfortable. This is especially noticeable during the processing of hard wood: oak, ash, maple, etc.п.

saw melamine | no chip | woodworking | dave stanton | how to basics

Therefore, craftsmen recommend adhering to the rule: the length of the blade should be twice as long as the area to be sawed. This ratio guarantees convenience in processing. A smaller saw will jam, and you have to pull it out with great force. Too long will begin to spring and seize, and may break. All of this will make it much more difficult to manipulate. Choose a length of 250-300 mm for small items, for large. 450-500 mm.

The width of the blade also matters. A blade that is too narrow will break even if it bends just a little. Excessively wide tools are uncomfortable to work with, you have to exert considerable effort. The optimum width for a hand saw is 100-200 mm. You should know that products of a certain width are used for different types of processing. That’s why craftsmen buy them in sets to choose the right blade for different purposes.

Carbon or alloy steel is used to produce the blade. Each has advantages and disadvantages. Originally, low-alloy carbon metal was used. It is ductile, does not break, but wears out very quickly. Quenched, on the contrary, does not blunt for a long time, but breaks under bending load. A kind of compromise. bimetallic plates, where the metal is hardened only in the area of the teeth. Bimetal blades can be purchased at every construction store. They are malleable, do not break and do not blunt for a long time. But it is impossible to sharpen them again. Hardened metal is not easy to sharpen.

hacksaw, chipboard, which, better

Gross Piranha wood saw

High-alloy steel blades are available for professional applications. They give the best quality cut, but they are also very fragile. Softer varieties gain resistance to bending, but lose precision of the cut. For saws use high-alloy steel grades M50, M7, M2, M1. Products made of it are marked with HSS or HS. These are most expensive hacksaw blades.

For household needs, the blades are made of carbon material. They are malleable, not sensitive to bending, resistant to sharpening. Though, it is rather difficult to grind and set teeth qualitatively. Not all masters are able to cope with this and, in order not to spoil the saw, they turn to professionals for help.

Choose a metal of medium hardness for daily use. It is marked with the numbers 45 and the letters HRC. The harder variant is also suitable: 60-55 HRC.

Tools and equipment for sawing

Depending on the amount of work to be done and the configuration of the saw is used:

Not every tool can produce a part with the desired shape.

See also  Which attachment to sand wood with an angle grinder

Square-cutting machine

If you know the exact dimensions by which to cut the sheet, it is better to entrust the work to professionals. Almost all sellers. bases and construction markets. provide such an option. Often the cutting service is free, you only have to pay for the cost of the chipboard.

Different constructions of sizing and cutting machines are used for cutting.

Various auxiliary devices make it possible to cut chipboard without splintering. For example, some models have two sawing discs: the first, a small diameter, cuts through the surface laminated layer, and the main carries out a full cut.

NC format-cutting machines work in a semi-automatic mode, eliminating operator errors, which allows to obtain finished parts with dimensions accurate to 1 mm. This is important when making cabinet furniture.

Jigsaw

The electric jigsaw is used to cut straight and curved sheets.

  • availability. most craftsmen have a jigsaw, and a new one is inexpensive;
  • There are special saws on sale for Particleboard, Laminated Particleboard and Laminate;
  • it is possible to cut circles with a small radius;
  • suited for making through holes for hatches or electrical fixtures.

To get a straight cut, you need to be experienced with the tool or it is enough to use a guide rail.

Planking

Hand circular saw, sometimes called “parquet”, is used if there is a large amount of work to be done on the cutting of chipboard on flat lines.

Buy discs with tungsten carbide tips of the teeth.

To simplify and accelerate the work choose parquet, complete with a guide rail or buy the accessory separately.

You can do without additional parts if the cut along the rail of an angle or a plastering rule.

The main disadvantage of the method is the impossibility of making a curved cut.

Cutter

In order to cut chipboard using a router, the handyman needs a lot of experience.

A smooth, flawless edge is only possible with diamond cutters, which are very expensive.

At home, the router is often used to finish the edges of laminated chipboard. In such cases, the sheet is sawn with a hacksaw, jigsaw or circular saw and then the cut is finished with a router. It is important to allow for a margin of 1.5 to 2 mm, which will be removed by the cutter.

Hacksaw

Cutting with a manual hacksaw is time-consuming and physically demanding.

Hand saws with large and medium teeth are only suitable for cutting regular chipboard (without the laminated layer). the result will always be accompanied by chipping and scoring. The appearance of the edge can only be corrected with decorative overlays.

A small amount of cutting is done with a fine-toothed hacksaw. To reduce the number of chips, glue a masking tape on top of the sheet, mark the line for the trimmer cut, and only then proceed to work.

Despite the fact that the landing places of the saw blades for parquet and angle grinder can coincide, it is strictly forbidden to cut wood chipboard and wood with an angle grinder. Even a weak machine’s torque will tear the tool from the hand and the disc will injure. The danger is that the rotation cannot be stopped instantly.

The blade is of primary importance in this tool. The use and life of the product depend on the steel grade, the hardening process used and the sharpening success. The choice of a wood hacksaw is based on four basic characteristics:

First criterion. length of blade. It depends on the needs of the buyer, so for small bars, boards, etc.п. 280. 300 mm of a hacksaw is enough. For construction or dacha more appropriate blade 450. 500 mm. There are more. When selecting a model, you should clearly know what size wood you are going to saw. The rule of thumb is this: the length of the hacksaw should be twice as long as the largest workpiece for which it is designed. It is possible and smaller, but the convenience of use will be lost. This is due to several reasons:

  • this ratio allows all the teeth of the hacksaw to fully exit from the log during sawing, which means effective sawdust removal (will not be clogged);
  • Easier on the hand, less fatigue at high speed.

Tooth size and sharpening. Cutting accuracy and speed will depend on this characteristic. The regularity is as follows: a shallow tooth means a clean and precise cut, but less speed; a larger one means a coarse cut at a much higher speed and less fatigue. This characteristic is referred to on hacksaws as “TPI”, which stands for the number of teeth per inch (almost 30 mm). The higher the TPI value, the more “delicate” the cut will be. For example, for works with particleboard and fiberboard, this value should be at least 7. 9. the sawing surface will be smoother without a “torn” edge.

For work in the garden the cleanliness of the cut is not so critical, especially for cutting or sawing logs. important in this type of work is the cutting rate and effort to be expended. For that we need a hacksaw with TPI 3-6, distance between teeth from 4 to 8 mm.

The classic tooth shape is a triangle. As a rule, these saws belong to the sharpenable type. Latest generation of sabre saws with hardened teeth have a trapezoidal shape. They are originally designed with increased strength and durability. When blunt. go buy a new hacksaw or change blade. With all the desire to sharpen it will not work: to repeat the angles of sharpening is extremely difficult, and such steel file is not amenable. Provided the manufacturing process is observed.

See also  What's the best battery for sabre saws

Type of steel. Standard hardness of metal for wood hacksaw is 45 HRC. Steel with hardness of 55-60 HRC is used for teeth. This type of hacksaw combines a flexible blade with high resistance to tooth wear. They are easy to recognize by their distinctive appearance. the teeth have a darker shade than the rest of the surface of the blade. These hacksaws are of the non-sharpenable type. If the teeth are not knurled. They can be dressed and sharpened.

Handle. Its ergonomic design determines the number of blisters on your hands. There are two types of handles: flip-over or classic. The first option lets you change blades, such as in the Bahco Superior EX-19-XT9-C wood sabre saw.

The blade is of paramount importance in this tool. On the steel grade, the correct hardening procedure and successful sharpening will depend on the usability of the product and its service life. The choice of a wood hacksaw is based on four basic characteristics:

The first criterion is the length of the blade. It depends on the needs of the buyer, so for small bars, boards, etc.п. 280. 300 mm of a hacksaw is enough. For construction or dacha, the blade 450. 500 mm is more appropriate. There are also more. when selecting your model, you must know exactly what size wood you are going to saw. The rule is as follows: the length of the hacksaw must be twice as long as the largest workpiece for which it is intended. Shorter blade length is possible, but the user-friendliness will be lost. This is due to several reasons:

  • such a ratio allows all the teeth of the hacksaw to fully exit from the log during sawing, which is an effective removal of sawdust (will not clog);
  • It’s easier on the arms, the arm doesn’t get as tired when you’re swinging.

Size of the teeth and their sharpening. This characteristic will determine the accuracy of the cut and its speed. The pattern is as follows: a shallow tooth makes a clean, precise cut, but slower speed; a larger tooth makes a coarser cut at much greater speed and less fatigue. This specification is referred to on hacksaws as “TPI” which stands for Number of Teeth per Inch (nearly 30 mm). The higher the TPI value, the more “delicate” the cut will be. For example, for works with particleboard and fiberboard, this value should be at least 7-9. The cutting surface will be smoother with no “torn” edge.

For work in the garden, a clean cut is not as critical, especially for trimming or sawing logs. The more important characteristic in this type of work is the cutting speed and the effort to be expended. We need a hacksaw with TPI 3 to 6 and a tooth pitch of 4 to 8 mm.

The classic tooth shape is a triangle. As a rule, these saws are of the sharpenable type. The latest generation of hacksaws with hardened toothing has a trapezoidal shape. They are originally designed to be stronger and more resistant to wear. When it blunts. go and buy a new hacksaw or change the blade. It will not work if you want to sharpen it: it is extremely difficult to repeat the sharpening angles, and this steel cannot be filed. Provided the manufacturing process is correct.

Type of steel. Standard hardness of metal for wood hacksaw is 45 HRC. Steel with hardness of 55-60 HRC is used for teeth. This type of hacksaw combines a flexible blade with high resistance to tooth wear. They are easy to recognize by their distinctive appearance. the teeth have a darker tint than the rest of the blade surface. These hacksaws are the non-sharpenable type. If the teeth are not knurled. They can be dressed and sharpened.

Handle. The number of blisters on hands depends on its ergonomics. There are two versions of the handle: a flip-up handle or a classic handle. The first option lets you change blades, such as in the Bahco Superior EX-19-XT9-C wood hacksaw model.

Hacksaw Specifications

According to GOST, wood hacksaw blades for carpentry and joinery work (manual wood sawing) must comply with certain technical characteristics.

The state standard specifies what materials the blade and handles can be made of, what connection of the working surface with the handle should be. Permissible dimensions of the tool and its individual parts are also specified. There are requirements for the sharpening and dilution of the cutters, the minimum allowable sharpening to the front and back edge of the tool.

material of manufacture

Hacksaw blades are made of high carbon and silicon alloyed tool steel:

Harden the metal by affecting it with an alternating magnetic field, when an electric current of high frequency appears. As it spreads over the surface, it heats the metal layer, which hardens after cooling. The hardness of 45 HR C is considered standard, though it is recommended to use products with a hardness of 55-60 HR C when the flexibility is sufficient and the teeth are highly resistant. Visually inspecting such a tool, you can see a darker tint to the honed teeth.

Related Posts

| Denial of responsibility | Contacts |RSS