Cultivator elitech kb 60 what belt

ELITECH KB 60H gasoline cultivator

Cultivator ELITECH KB 60H is designed for cultivation (loosening) of soil with cutters in the garden and homestead plowing, plowing virgin lands, ditching, digging potatoes with attached equipment, bringing fertilizers into the ground. Cultivator can be mounted on attachments (not included).

You will get up to 259 bonus points for buying this product. Bonus program Elitech-m-ru: 1 bonus = 3 rubles.

ELITECH KB 60H cultivator

Designed for cultivating (loosening) the soil with tillers in the garden and homestead plots, plowing virgin lands, ditching, digging potatoes with the help of hinged equipment, bringing fertilizers into the soil.

Characteristics of ELITECH KB 60H chain cultivator

Technical Specifications
Products group Cultivator
Series like Benzo
Warranty, month 12
Country of Origin China
Engine type gasoline four-stroke
Gear type chain
Working width, mm 850
Power, l.с. 6.5
Engine displacement, cm³ 196
Oil volume in the crankcase, l 0.6
Fuel tank capacity, l 3
Weight, kg 56

Cultivator ELITECH KB 60H for sale in the store (Ulyanovsk) for only 28 045.76 р.

For your convenience we have our own delivery service in the city and region.

It is also possible to send to your city by transport companies.

For detailed delivery terms please contact our managers by tel.7-927-270-55-26 or use the delivery information.

If this product is out of stock, you can place an order.

Cultivator ELITECH KB 60H. Other products by Elitech are on sale in our online store

ELITECH KB 60H 7 l gasoline cultivator.с.

Color may vary from the actual illustration.

Rated based on 25 customer reviews

Electric device KB 4E

The device Elitech KB 4E does not just work on clean energy, it has already managed to get into many ratings of cultivators 2018. Cultivator of this model belongs to the light category. It is able to work stripes of land with a width of 45 cm and a depth of 15 cm. Buyer gets 4 milling cutters with the cultivator. They are driven by a 2.7 liter engine. с., The force transmission is carried out with the help of a belt clutch.

KB 4E developers did not use a gearbox. A chain-type gearbox is installed on the power tiller.

Dry weight of the construction reaches 32 kg. Only front gear is available. Judging by the reviews, the machine is almost as good as a full-fledged power tiller. Even when working in virgin land, this cultivator can cut through tough plant roots and small wood stumps. It is possible to work 5 hectares of land in two runs 30 minutes apart. Motor overheating in such conditions is excluded. Customers note that the KB 4E meets expectations.

See also  How the tornado cultivator differs from the tornado

Robust enough to not break when hitting stones.

Inexpensive and efficient CB 70

The characteristics of the Elitech KB 70 allows you to consider this cultivator the best choice for occasional use. Judging by the reviews of practitioners, this device allows you to plow the land, and to prepare the garden for planting crops. The 33 cm diameter tines can cultivate a strip up to 56 cm. Compared to the electric versions the technique has a high power. Thanks to the air cooling of the engine, we can slightly reduce the weight of the machine.

In reviews of the KB 70 also noted the correct placement of handles, the addition of transportation wheels in the kit.

Cultivator, no matter what attachments are installed on it, it works relatively quietly. For normal operation, it needs gasoline AI 92. Sump capacity. 0,5 l. A special belt provides the coupling.

Model range of Elitech cultivators

Motor cultivators of this brand has a fairly wide range of products of this type. Now we will get acquainted with just a few of the most popular models of cultivators.

Культиватор Elitech KB 60 обзор плюсы и минусы.Cultivator Elitech KB 60

Elitech KB 60H

Cultivator Elitech KB 60 will perfectly recommend itself for works of any complexity on large plots of land. Among the advantages of this unit, it is worth noting a decent digging depth, good grip of the land, the excellent endurance. And the use of attachments only multiplies the functionality of the machine.

  • Engine: gasoline 4-stroke
  • Engine output: 6,5 liters. с.
  • Gearbox: chain
  • Clutch: belt-driven
  • Gears: 1 forward and 1 reverse
  • Weight: 56 kg
  • Dimensions: 820x430x780 cm
  • Starter: manual
  • Transmission: chain

Elitech KB 71M

Cultivator Elitech KB 71M is designed for cultivating the soil, its plowing and mixing the fertilizer with the soil. Of course, you can make this unit more functional by attaching attachments. Also features Elitech KB 71 mowing cultivator have good stamina and a powerful engine that allows you to work effectively in the virgin soil.

  • Engine: gasoline, 4-stroke
  • Engine power: 7 liters. с.
  • Ignition: electronic
  • Gearbox: chain: 1 forward and 1 reverse
  • Start-up: manual
  • Transmission: chain
  • Fuel tank: 3 l
  • Weight: 60 kg

Motor cultivators Elitech: advantages and characteristics of models

Each Elitech power tiller is considered a “solid middling” in its class and price category. This machine can solve a lot of different tasks, it does not consume much fuel and is equipped with everything you need for work. Below we will consider the most popular models of this brand and examine their features.

Review: Elitech KB 60. A reliable helper in the garden.

Greetings to all!An indispensable helper in the countryside, in the country house when cultivating the land. hectocultivator. Elitech KB 60 was purchased in 2014, for all time has shown itself as a reliable, unpretentious, affordable in service. Equipped with a 4-stroke engine rated at 6.5 liters. с. OHV.

See also  Single axle tractor and motor cultivator in what is the difference

In the beginning of using the tiller there were some difficulties, I worked the soil to its maximum depth and moving forward was difficult, I had to bend the tiller from side to side, push it. The main reason. the gear housing runs on an “unplowed” strip between the right and left cutters. resting on it. The width of this line is 12 cm.

I was solved by moving the first blades closer to the gearbox housing, the blades pipes were cut by 1,5 cm, holes for fingers were re-drilled.

After that, forward movement became more confident (a narrow strip of soil, untouched by cutters, is easier to destroy by the gear case).Cutters set for 2 on each side (the set of 6 pieces), with my lean build to manage a 6-th hard. Working width with 4 tillers 62 cm (with 6 tillers 85 cm). At a working depth of about 25 cm. The engine runs smoothly, the load is easy to handle (the speed is slightly above average).

The control is convenient, with two levers. Forward and backward motion.

The throttle control handle under my right hand, informative, convenient.

The forward and reverse drive cables are adjustable in length in 2 places, which is justified (if the belts are stretched, adjusting in one place will not be enough).

The cables are not rigidly connected to the idler levers, there are springs that provide a protective, limiting function. No matter how hard you push on the travel lever. the roller pressure on the belt will be limited by the spring stiffness. Also, if a foreign object (brick, large stone) gets between the cutter blade and the gear housing, the limiting spring will slightly loosen the belt tension (letting it slip, preventing transmission failure).On the front wheel drive

The presence of such a spring, from my point of view, on the reverse is probably unnecessary, probably justified by the interchangeability of the front and reverse cables.The belts themselves are native, the front end belt has been “frayed” over the years of use. Started to get chunky (I think a couple more seasons), backing up. Like new (although thinner).

The transport wheels are comfortable enough for transportation, stable.

And for stability during machining (from the description in the manual). The oil level in the lower part of the filter is visible at the marker. During cultivation, it is set to the highest position.

Coulter is set rigid (removable), some models of cultivators, it folds itself when moving backward, what is more convenient I do not know.The air filter is oil filter, which is very convenient, as an “expendable”, the oil was changed only once (a paper filter would be necessary to buy more than once).

Oil level in the filter can be seen by a marker

Oil level in the engine at the bottom of the filler hole, convenient. No need to overfill.

See also  How to correctly assemble blades on a cultivator

I changed oil once after the break-in period and again in 3 years (now the time is up). change again). I don’t understand people who change oil every season, in a season of about 8-10 hours the oil clearly has not lost its properties.

The neck of the fuel tank is equipped with a grid with a maximum fill marker.

Filling the fuel above the marker is undesirable, it may spill out when tilting the cultivator.

The handle is removable, it takes much less space in storage.

After winter storage, it’s easy enough to start, just close the choke completely and don’t forget to open the fuel cock.Included was an instruction manual, quite informative 28 pages

And accessory kit (never used)

For the money, I recommend it for purchase and use as a reliable farm-to-town worker.Thanks for the tip!

cultivator, elitech, belt

How to change the V-belt

V-belts are the most common on domestic self-propelled rotary lawnmowers. They are replaced and adjusted according to the following algorithm:

  • Place the mower on its side for easy access to the drive.
  • Remove the drive guard by loosening the screws or releasing the latches.
  • Remove the belt retainer near the drive pulley.
  • Unscrew the blade locking screw.
  • Remove the blade.
  • Remove the idler pulley from the shaft along with the belt.
  • Put a new V-belt on the drive shaft.
  • Put the belt on the idler pulley and fix it on the shaft.
  • Replace the blade and secure it with the screw or nut.
  • Reinstall the belt retainer.

Belt adjustment is not normally required for this type of design.

General principles and rules for changing a lawn mower belt

Power belts in lawnmowers are used both to drive the cutting blades and to transmit torque to the drive wheels on self-propelled models. If you need to replace this part, follow the general rules and principles below:

  • Be careful. switch off the engine and wait for the blades to come to a complete standstill.
  • De-energize a lawn mower with an electric lawnmower.
  • On models with a gasoline engine, remove the spark plug.
  • To replace the drive belt of the lawnmower, you need to get access to the bottom of it.
  • Models with gasoline engines may be turned on their side so that oil will not enter the carburetor and air filter.
  • Before removing the drive belt, fix its position relative to the tensioning and limiting rollers (take a picture or draw a diagram).

Whenever possible, refer to the recommendations in your lawnmower’s official manual. The following information is provided for reference only.

Related Posts

| Denial of responsibility | Contacts |RSS