Can the Renovator cut metal?

What is a renovator Video about what you can do with a renovator, demonstrates that it treats soft linoleum, wood or even metal with equal ease, allows you to perform work that is simply impossible to do with other tools.

Their most economical choice costs 2,270. Its weight is 2 kg, the brand. Spets BMI-300K. It is connected to the power grid with the help of a cable, the length of which is 1.8 m.

How to work with a metal tool

MFI can be used not only for different types of wood, but also for metal. the only difference in use is in the application of the appropriate bits for metal. How to use the renovator when working with metal workpieces, and what this tool is capable of, let’s consider below.

  • The principle of installing cutting elements is similar to that for woodworking machines. It all depends on the features of this device.
  • Many believe that such a device is not capable of performing complex work, and with the task of sawing screws he certainly will not cope. But the tool proves otherwise. With its help, you can shorten a bolt with a diameter of 20 mm, and this value is not the maximum thickness.

STOP! Watch This Before You Use A Oscillating Multi Tool (Stupid Mistake)

renovator, metal

Can cope with any metal, doing the job, maybe not faster than when using an angle grinder, but of much higher quality. Learn more about the Renovator‘s abilities with respect to metal in the video below.

Overview of the tool. Renovator

Multifunction tools from different manufacturers differ in some technical characteristics. In the first place is the power, which already depends on the frequency of oscillation. Typically, devices for home use produce no more than 300 watts, this is quite enough to perform 20000 revolutions per minute. The higher the RPM, the better and faster the operation. But different materials may require different frequencies, which is why most tools are equipped with electronic regulators. For sanding and sawing soft wood, you can set the maximum speed, and for metal you should choose a low speed. Also, the swing angle may differ, the total amplitude or the angle at which the working head deflects to the right and left of the axis is indicated on the device. It affects the stroke length of the nozzle and there is little difference between the models. According to the type of power they divide mains and cordless renovators. Most cordless ones use lithium-ion batteries with a capacity of 1 to 3 Ah, and often come with spare. Take this into account, as it is quite difficult to find batteries separately from the tool on sale. Corded power tools are usually more powerful and better suited for continuous work and come with a 3 or 5 m cable.

See also  Cutting metal with guillotine shears. Sabre shears

Renovator attachments

  • HCS. High-carbon steel for soft materials;
  • HSS. Fast-cutting steel for working with non-ferrous metals;
  • BIM. Combination of HCS and HSS, has a wide range of applications, from wood, to ferrous metals;
  • HM. Hard alloy for fiberglass, concrete and ceramics;
  • CV. Wear-resistant chrome vanadium alloy for soft metals.

Choosing a Renovator

No matter how much experience a specialist has, and no matter how confident they are, sometimes they need to consult with someone. Communication on the Internet has long been familiar to us. A variety of users of the web. whether a professional or a knowledgeable amateur. can put on the web the tips (simple useful tips on various topics) that can be usefully applied to your home.

renovator, metal

Cutting stainless steel w/ Bosch Carbide multitool blade

What are the pros of using forum resources?

  • A constant stream of interesting information about new construction ideas.
  • Simple and useful tips for construction.
  • Opportunity to communicate with interesting people, experienced masters of their craft.
  • Advice on choosing tools or materials.
  • Also a nice plus is the absence of advertising, because users are the same consumers as you.

In our forum you can find all the latest construction news, because our specialists always have their hand on the pulse of construction events. Here you will find useful information for the operation of the room, equipment and so on. Many consider it useful to do more for the house with their own hands, because it is both useful for health, profitable economically, and provides some moral comfort. And there is a logical question: “How do I make my own grease??” You can get answers by browsing our website. Exactly after visiting this forum you will feel all the advantages. On this Internet resource you will find information for the arrangement of dacha with their own hands. But many of those recommendations can also be taken into account in your home. Household projects of varying scales require tools. For a general consultation of visitors to the site is created an overview of tools, where the information is filed simply and accessible.

See also  How to install a turtle on an angle grinder. Metal and wood sanding angle grinder accessory (bladed abrasive disc)

Metal cutting and overview of metal cutting technology

Cutting metal is the process of separating material into pieces. Metal sheets or cut sections of long products are cut in this way. The impact of the cutting tool on the metal creates blanks for further processing. Surface configuration is formed according to the drawings developed. You need equipment for cutting metal. These can be hand tools, mechanical machines or devices that provide heating of the material.

Gas-oxygen cutting

What is able to multitool remove the build-up of plaster, glue, foam, peel paint; peel linoleum from the floor; saw down nails and screws flush; remove slots in wood and plasterboard from the end and plunge (immersion);

And today, cutting metal with it is not only possible, but also quite convenient Video on using Renovator shows that it can be used for cutting nails and screws, for sawing parts of iron fixtures, for processing sheet metal.

What’s unique about the universal cutter

Considering that Renovators are not designed for high volume of works, it is difficult to find negative features in them.

Renovators have smooth, ground edges. Multitool is indispensable for cutting “sandwiches” of different density materials.

There is very little dust when working with the multi-tool, and it does not fly in all directions. And with a vacuum cleaner attached, you can do minor repairs at home without preparing the room.

The first resurfacing machines were used for removal of plaster in traumatology. Tools are hard to injure. And there are no flying splinters, like shrapnel, when the blades are damaged.

Using a wood bandsaw to cut metal!

Technical data

At the domestic market of power tools renovators are presented quite extensively. Models of such well-known manufacturers as Bosch, Fein, Makita, etc. are in the greatest demand.

The main parameters of some of them are summarized in a comparative table:

Specifications Multitool model
Pmf190 e set RTM 200S OMNI 300 TM3000C MultyMaster 350
Power, W 190 200 300 320 350
Speed of rotation of electric motor, thous.about./min. 1521 1020 up to 20 620 1019,5
Amplitude, ° 2,8 3 4,0 3,2 3,4
Weight, kg. 1,2 1,6 1,45 1,4
Power Network
Purpose The Pro Genesis Pro
Manufacturer Bosch Ryobi AEG Makita Fein

One of the main advantages of the multi-tool is its versatility. With its help, you can mechanize a number of small, auxiliary operations, the need for which often arises during independent performance of works.

renovator, metal

Contributes to this a large number of a variety of nozzles, the number of which in some kits can be up to 40 pcs. Each of the nozzles is designed to perform a specific type of work. Besides interchangeable accessories some models of renovers are completed with interchangeable heads, by means of which they can be easily transformed into a nut-wrench or an electric screwdriver, etc.

See also  How to trim a baguette ceiling plinth. A little history

Renovator (MFI. multifunctional tool, multitool) is a versatile device for construction and finishing works.

It was invented some 50 years ago by Fein, and was originally going to be used for removal of plaster for medical purposes.

It was then possible to integrate the gearbox into the tool and adapt it for bodywork.

than 10 years have passed since the company ran out of patents on the device. Renovator is now a tool for cutting and grinding objects of various materials. It is possible to pick up a huge variety of attachments for work in several areas. But more often Renovator is used as an auxiliary tool to perform small amount of works. Is suitable for hard-to-reach places, where special gearboxes are hard to reach.

The renoovator is in fact an oscillating tool. This means that the nozzles do not rotate around their own axis, but make a slight oscillation from side to side. This is the main difference between this tool and an angle grinder or a drill.

Among the main functions of the renozzler are:

  • Surface drilling for various communications (pipes, wires);
  • Expanding the seams on the laid tile;
  • Cutting sewer pipes and fittings on the walls;
  • Tile cutting;
  • Peeling off the linoleum from the floor;
  • Trimming door frames that are already installed;
  • Removing grooves on plasterboard or wood
  • Removing floating plaster, assembly foam, adhesive or paint;
  • Grinding out low-access areas and concave corners;
  • Sawing off nails or screws;
  • Cutting plastic sheeting or soft sealers;
  • Tools sharpening;
  • Trimming skirting boards, eaves.

Professional builders think that the Renovator is not the most important tool. It is perfect as an auxiliary device during finishing work or for correcting work that has already been done. And when you use the renovator at home, you save the purchase of a whole list of tools.

Related Posts

| Denial of responsibility | Contacts |RSS