Blade Replacement on a Makita Razmus.

Razmus “Makita”: device, instructions, repair, reviews. Which planer to choose. “Makita” or “Hitachi”?

Supplier of the 2012 Makita woodworking machines is Makita Corporation. Website address: https://www.Makita.biz

Makita was founded in 1915 by Mr. Masaburo Makita in the Japanese city of Nagoya. In the early years, the company sold and repaired electric motors and transformers. In 1935, the company was established in Russia. The company began exporting electric motors and generators to Russia.

The Makita Corporation consists of 8 manufacturing plants of which 2 are located in Europe: in Great Britain and Germany.

The representative office of Makita in Russia. Makita Ltd. Moscow has been selling professional power tools for more than 15 years and all over Russia. Website address: https://Makita.ru

Machines manufactured by Makita

  • Makita-2012- a planer
  • Makita-2704- a circular table saw
  • Makita-MLT100- table saw

New image of the old doll

Hello everyone, especially my subscribers!

Haven’t shown the dolls in a while, someone has already unsubscribed. sorry.

I got another rescued doll. For LL. at once was/is, details. below.

I’ve been eyeing this doll for a long time. Something about her “hooked”.

I’ve been looking at this for years. this beauty, the Moscow factory souvenir and gift toys, not rare, often on sale found, and even in excellent condition.

But. I’m not interested. in excellent, I am not a collector. Amateur with lifeguard tendencies.

blade, replacement, makita, razmus

Originally supposed to keep her native hair, and sew an outfit in the same style.

The doll arrived. Unfortunate blur, wig and outfit just fall apart in my hands.

After washing and disinfecting looked at all this “beauty”. And discarded wig, warm frame skirt and outfit.

blade, replacement, makita, razmus

Repainted the face. Was going to sew a new body (half) and a new skirt.

But suddenly I, a lover of doll warmers, wanted to sew THIS doll full body, with legs! Surprised by this desire.

Turned stately young lady. made her taller than she was once.

Soft but stable, with bendable legs. Figurine)

And then I remembered that I wanted to make a doll in an outfit with antique ornaments.

Wig made of natural linen. Tinted it a little to match the complexion.

Clothing. Batiste shirt with lace on sleeves. Skirt with embroidered ornament.

It seems to me that it was for the sake of it all started))

Cross stitch on plain paper. Drawing. based on antique embroideries.Of course, had to adapt to the size of the doll.

Pearl beads and earrings, leather boots.

I really enjoyed my work!

The Makita-2012 Portable Electric Rotary Taper Wall Planer. Purpose, scope of application

The Makita-2012 woodworking planer is designed for planing workpieces made of wood to pre-set dimensions. The Makita 2012 is intended for individual use and is not designed for continuous production.

The Makita 2012 is a lightweight and compact planer designed for individual use in joinery workshops and “away from home” on construction sites. Thanks to the commutator motor it weighs only 27 kg, but has a power of 1.65 kW. This type of motor is temperature-intensive, so the Makita 2012 is equipped with an overheat sensor that shuts down power when you need a cooling break.

The Makita 2012NB planer mill

The Makita 2012NB panel mill replaces an earlier outdated model, the Makita 2012.

The main differences between the Makita-2012NB and the Makita-2012:

  • Engine power. 1.65 kW instead of 1.33 kW
  • Rotating speed of the blade shaft. 8500 instead of 8000 rpm
  • Maximum possible planing depth. 3,0 mm instead of 2,5 mm

In addition, the Makita 2012NB has a more rigid power frame design and double insulation of electrical circuits.

With its high performance, the machine weighs 27 kg and remains mobile: you can take it to a construction site or move it around the workshop by yourself. Can be placed on the floor (open stand supplied as standard) or on a workbench. When operating the machine, please note that precise and fault-free operation is only possible with good chip removal, e.g., with extraction systems.

Metal, asbestos cement, stone and similar materials, soft plastics, and rubber-like materials are not permitted on these machines.

In terms of quality of planing the machine is not inferior to stationary models of the entry level, on the contrary, the high speed of the knife shaft makes it preferable in some cases. There are all standard systems typical for stationary analogues: automatic feed mechanism, infeed and outfeed tables with rollers (for convenience of transportation and storage they are folded), rollers on top of the case for workpiece return. A single rotary knob adjusts the height of the blade shaft, depending on the size of the workpiece.

The accumulated experience of using a Makita-2012 has shown that the machine is very durable and reliable if only a few simple rules are followed. Only need to avoid operation without connection to vacuum cleaner and timely clean all mechanisms from shavings.

blade, replacement, makita, razmus

The machine runs on a single-phase 220 V AC 50 Hz.

See also  How to charge a Bosch s3 007 battery

Description of the construction of the thicknessing machine

The Makita 2012 NB rotary cutter is a tool for professional use that removes the top layer of wood workpieces. Has an excellent productivity, which makes it possible to use it in a full working day. The Makita planer is also safer than a conventional planer of the same blade width.

Two 304 mm wide knives are used in processing. They are mounted on both sides of the drum, which has a rotation speed of 8500 rpm. Such a height is necessary for high-quality work with wood.

The top of the Makita 2012 NB has a handle, it adjusts the height of the main bed, in the center of the thicknesser is the drum and knives. One revolution raises or lowers the base by 2 mm. Height can be adjusted between 0. 160 mm. Maximum thickness of materials that can be cut in one pass is 3 mm.

Depth gauge in the front of the frame gives the operator the possibility to see the current height of the knives. When a workpiece passes inside the machine, the depth of cut you get at the output will be shown.

Chips are ejected backwards during planing on the Makita 2012 NB model. To keep your workspace clean, you can place a spigot (included) on the center of the bed, which is triggered by pressing a button on the bed. There is also a power button and an indicator lamp that informs you that the equipment is energized.

Review: Makita 2012NB thickness trimmer. There is no limit to how good it can be

I have been using this machine for four years. I’ll start with the cons.1)Disposable knives for those who choose to handle hard varieties. the problem is. Cannot be sharpened because they are narrow, there is nothing to hook on. They can only be refilled, t. е. “sharpen” on one side. They cost a pretty penny. For me, the cost of consumables is critical. You can look for a set of interchangeable knives. I heard there are. However, for scaffolding (pine, spruce, larch), this is rather a plus. See. п.3 “Pros of”.

2)The step at the beginning and end of the workpiece is inherent in all semi-professional machines. After 2 years of use, eliminating the step turned into a tambourine dance. Chain tensioner spring popped off; feed (tilting) tables “gone” from the settings; one (!?) of the 4 compensating springs of the infeed rollers had sagged by 6 mm. 3) The chain tensioner is ridiculous. I just saw it and marveled?! 2mm wire. slides directly on the links. Seen it on the “Mastermind” amplifier, sawed by hand, but there is no desire.4) The table is made from household “stainless steel” 0.7 mm thick. I am sorry, I have not noticed. dragged the workpieces with nails, which broke off inside the array, through the thicknesser a couple of times. Bore on the table (to 1,5 mm) grinded with a disk grinder, polished with paste for lapping valves, blow-dried a high-temperature paraffin on the table. It is better than it was. but the time is lost.

Pros.1)Polyurethane feed rollers. The workpieces don’t stain like rubber. Over the years I can count on the fingers of one hand the instances when the thicknesser refused to pull the workpiece. Passed completely raw bar (it cried). Pulls!2)Steel on knives. Believe it or not, the blunt knives planed almost as cleanly as new. I understood it only by the vibration of the shaft and the characteristic sound. Bought new ones a year ago. same pattern. Excellent quality steel!3) Easy maintenance. There are only two screws to “guts” Right and left. Handy carrying handles. Replacement of disposable knives is a pleasure! For those in the know. to expose the knives parallel to each other, and even to the table. on the shafts with “floating” (sharpened) knives. This is a challenge for the faint of heart.4)The layout of the machine units and materials. aerobatics! The belt after 3 years was like new with no dust or scuffing. Chain still had original grease. The wear on the polyurethane rollers is even, both longitudinally and relative to each other (!?). The wear of slide bearings of the feed rollers is identical and, in my opinion, was not more than 0,05 mm.

The first impression of the machine for 3 years has not changed. “What a technique!” I would recommend to those who work with construction wood. For hardwood, the Makita 2012NB is too costly.

Review: Makita 2012NB Razmus. There is no limit to perfection

I am using this machine for the 4th year. I will start with the cons.1)Disposable knives for those who want to work hardwood. The problem. It is not possible to sharpen them because they are narrow, there is nothing to catch on. You can only refill them, t. е. “sharpen” on the one hand. They cost a pretty penny. The cost of consumables is critical for me. You can look for a set of interchangeable blades. I have heard of them existing in nature. However, for construction timber (pine, spruce, larch) this is rather a plus. See. п.3 “Pros”.

2)The step at the beginning and end of the log is inherent in all semi-professional machines. After 2 years of use the removal of the step turned into a tambourine dance. The chain tensioner spring slipped; the feed (hinged) tables “gone” From the settings; one (!?) of the 4 compensating springs of the feed rollers had a 6mm drop. 3) ridiculous chain tensioner. When I saw it, I was aghast?! The wire of 2 mm. glides directly on the links. Saw it on the “master” The amplifier, sawed by hand, but I have no desire.4)The table is made of domestic “Stainless steel” 0.7mm thick. I’m sorry, I didn’t see it. A couple of times dragged through the thicknesser blanks with nails, which broke off inside the array. Bore on the table (up to 1,5 mm) grinded with a disk machine, polished with paste for lapping valves, blow-dryer spread on the table high-temperature paraffin. Better than before. but the time wasted.

See also  How to sharpen a lawn mower blade yourself

Pros.1) Polyurethane feed rollers. The workpieces don’t stain like rubber. I can count on my hands the number of times the thicknesser has refused to pull a part. The raw bar was skipping (I even cried). Pulls!2) steel on the blades. Believe it or not, blunt knives gouge cleanly almost as good as new. I understood it only by the vibration of the shaft and the characteristic sound. Bought new ones a year ago. same pattern. Excellent quality of steel!3) Easy to service. Total of 2 screws to “guts” left and right. Handy carrying handles. Replacing disposable blades is a pleasure! For those who know. Set the knives parallel to each other and also to the table. On the shafts with “floating” (sharpened) knives. This is not a task for the faint of heart.4) Layout and materials. aerobatics! The belt after 3 years was like new with no dust or scuffing. The chain still held the original grease. The polyurethane wear on the rollers is even, both longitudinally and relative to each other (!?). The wear of the slide bearings on the feed rollers is the same and in my opinion was not more than 0,05 mm.

First impressions after three years of use unchanged. “What a technique!” 🙂 I would recommend to those who work with construction timber. For hardwood the Makita 2012NB is too costly.

Makita 2012NB Razmus. disassembly, cleaning, lubrication, assembly. Replacing knives.

Disassembled and cleaned the shafts, chain, gears and everything else I could in my Makita 2012NB reclaimer. And replaced the knives, or rather flipped the native double-sided knives to the other side. You can watch all my videos here: YouTube.com/channel/UC5eTFo5xMyqK5W3eTqU2_ZA/videos Composition “River Meditation” By Audionautix. License: Creative Commons Attribution (creativecommons.org/licenses/by/4.0/). Artist: audionautix.com/

Thank you so much for the details. today bought such a machine for the workshop.

Tell me, do the broach shafts installed without the chain rotate hard or easy? I just disassembled, reassembled and turned a little tight, but as it was originally did not pay attention

Nowadays, when I take something apart, I try to get it on camera, just for my own pleasure. Helps when reassembling.

Good evening. Without a chip suction you can work? No shavings will get under the workpiece and disrupt proper planing? Thank you very much!

Hello! very interesting Ah, but here’s a lubricant on the shafts, you went too far, there are bearings, they need a special grease, otherwise the dust is mixed with the grease and screw it. You can rub rosin on the shafts

Well done. You got it all figured out. I also ordered one myself and am waiting for the package. What can you tell me about it??

Hi, how do you mount the sprockets, flat side against the shaft or vice versa??

Great video tutorial, thanks!I also recommend regular degreasing of the tables, t.к. They leave tar residue on them during operation, which prevents the workpiece from sliding well.

Thank you for the detailed instruction. Finally found out what the magnets are for when replacing the blades.

Hello, Michael! The input (first) shaft has a long stroke (hence the large springs) for receiving the roughing workpiece, the second shaft pulls the workpiece after the knives (planed) because its stroke is shorter. In ten years of not frequent use, I’ve prevented such a planer a couple of times. Last time it took a long time to assemble, until the shafts stood up, the reason for the stoppage. Second shaft sprocket bolt came loose, causing it to come off. After cleaning and lubricating everything, I noticed a slight side loss of the second shaft (it goes left and right by a couple of millimeters). and the first one has a slight up and down wobble. Apparently this was caused by the nature of the direction of the load. Also, for some reason the second shaft is tighter than the first. Swapped the shafts in place, and landing in a new socket, shafts rotate with the new resistance ie. е. The light one became tight and vice versa. Could be hull deformation? And one (in the rotation of the sprocket) is a little crooked. Your sprockets seem to be wobbling too?

Not a complete review. Don’t know how to remove and disassemble the motor. You need to check the armature and stator winding. Any of this is out of order

Hello ! Watched your video, noticed that when you turn on the thicknesser at KDDk0nd8BYwt=8m36s 8:36 the sprocket on the left on the screen is not aligned with the shaft and walks up and down. The quality of woodworking is not affected?

Interesting and useful video. When we realized that this ryzmus was no longer enough?

Bought a machine like this. Question : is it necessary to adjust the tables from the new ? In the manual it says the height of the auxiliary table is set at the factory. of the manufacturer.

See also  What the bats look like for an electric screwdriver. Rules for the choice

Who bought not so long ago, who is the manufacturer (on the box) Makita (Finland) made in China. Is it normal?Makita a.s. (Finland) mainly makes cardboard from google.

Immediately disliked! You can not wipe anything on the reshmus with your favorite VD, they don’t like dust, and on the B.Д. It sticks like bees to honey.

Hello Michael! As always a very helpful and detailed video. Thank you. I just have this question about this thicknesser.Tell me please, have you adjusted the height of the auxiliary tables in any way? If so, how did it help in the fight against the step. Thank you.

Why does the depth mode not release when I twist, one side releases and the other side does not move

Makita 2012NB Razmus. disassembly, cleaning, lubrication, assembly. Changing blades.

Disassembled and cleaned the shafts, chain, gears, and everything else I could in the Makita 2012NB Razmus. And replaced the knives, or rather flipped the native double-sided knives to the second side. All my videos can be seen here: YouTube.com/channel/UC5eTFo5xMyqK5W3eTqU2_ZA/videos Composition “River Meditation” Owned by audionautix. License: Creative Commons Attribution (creativecommons.org/licenses/by/4.0/). Artist: audionautix.com/

Thank you so much for the details. bought a machine like this for the shop today.

tell me if the installed broach shafts without chain is hard or easy to rotate? I just disassembled mine and put it back together and it’s a little stiff, but I wasn’t paying attention

I now try to get everything when I take something like this apart, just for my own personal enjoyment. Helps when reassembling.

Good evening. Without shavings suction you will be able to work? No chips under the workpiece and prevent proper planing? Thank you very much.

Hello! Very interesting Oh, you went too far with the grease on the shaft, they need a special grease, otherwise the dust gets mixed with the grease and goop. You can rub rosin on the shafts

Well done. You got it all figured out. I also ordered one, I’m waiting for the package. What can you tell me about it??

Hello, how to mount the sprockets, flat side facing the shaft or vice versa?

Great video tutorial, thanks!I also recommend degreasing tables regularly, t.к. Resin deposits remain on them during use, which prevents good sliding of the workpiece.

Thank you for the detailed instructions. Finally found out what the magnets are for when changing blades.

Hi Michael! The input (first) shaft has a long stroke (because of the large spring) to receive a rough cut billet, the second shaft pulls through the workpiece after the knives (planed) because its stroke is shorter. In ten years of not frequent use, I have prevented such a planer a couple of times. Last time took a long time to assemble until the shafts were up, the reason for the stoppage. The sprocket bolt on the second shaft had come loose and it came off. After cleaning and lubricating everything, I noticed a slight side discharge on the second shaft (goes left and right a couple of millimeters). and the first one has a slight up and down wobble. Apparently this arose from the nature of the direction of the loads. Also the second shaft is tighter than the first for some reason. Swapped the shafts, and when seated in the new sockets, the shafts rotate with the new resistance t. е. Light became tight and vice versa. Could it be a hull deformation? And one (on the rotation of the sprocket) is a bit crooked. Your sprockets seem to be wobbling too?

Not a complete overview. I do not know how to remove and disassemble the engine. Need to check the armature and stator winding. Any of these things are out of whack

Hello ! I watched your video and noticed that when you turn the thicknesser on KDDk0nd8BYwt=8m36s 8:36 the star on the left of the screen is not aligned with the shaft and goes up and down. This does not affect the quality of wood processing?

Interesting and useful video. When you realized that this ryzmus was no longer enough?

purchased such a unit. Do the tables need to be adjusted when new? ? the manual says the height of the auxiliary table is set at the factory. of the manufacturer.

Who bought not so long ago, who is the manufacturer (on the box) Makita (Finland) made in China. This is normal?Makita JSC (Finland) from google cartons mainly makes.

Immediately disliked! Your favorite VD must not wipe anything in the resmus, they do not like the dust, and on the B.Д. It sticks like bees to honey.

Hello, Michael! As always a very helpful and detailed video. Thank you. I only have one question about this thicknesser.Tell me please, do you adjust the height of the auxiliary tables? If so, how did it help in the fight against the step. Thanks.

Why can not release depth mode when I twist one side is released and the second does not move

Related Posts

| Denial of responsibility | Contacts |RSS